Used Dts for sale (129)

Condition: new, Year of construction: 2025, functionality: fully functional, Dobot collaborative robot DOBOT MG400 Model DT-MG-P4R07-01I Dodpsw I Sl Tefx Ah Ujkw Weight: 8 kg Payload: 500 g (max. 750 g) Reach: 440 mm Axes: 4 Repeatability: ±0.05 mm

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate Dodpfx Askzpm Hoh Uekw -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Year of construction: 1990, condition: good (used), Make: STOLLE Type: DT-5 Year: 1990 Specifications Metric US Standard Floorplate Length 5000 mm Floorplate Width 2000 mm Height 310 mm No. Of T-slots 5 Distance from T to T-slot / Jump 400 mm Djdpfx Ahekwb Sqj Uokw T -slot size 28 mm Number of matching pieces 1 Dimensions (Estimate) Length 5000 mm Width 2000 mm Height 310 mm Weight 7000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: 2024 (new) Control system: DT 15 Bending length: 4050 mm Distance between the columns: 3600 mm Y fast Speed: 100 mm / s Y Working speed: 10 mm / s Y Retraction speed: 100 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Projection: 450 mm Dkedpfx Ahjff Hvlo Ujw 2 support arms 2 back gauge fingers Travel speed X-axis: 350 mm / s Travel in X-axis: 750 mm Travel speed in R-axis: (max.) 300 mm / s Travel distance R-axis: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor and linear guide and ball screw thread Stop finger back gauge with height adjustment (R-axis, manual) CE die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, in accordance with global standards Electrical equipment, in accordance with global standards Option: CE certified Motorized crowning and X & R backgauge Engine power 37 kW Oil tank capacity 250 lt Length 5300 mm width 1910 mm Height 3230 mm Weight approx. 20000 kg

Condition: used, mileage: 660,199 km, power: 340 kW (462.27 HP), first registration: 08/2017, fuel type: diesel, empty load weight: 8,537 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, truck registration, | DAF Space Cab, EURO6 | automatic, Intarder, electric windows | refrigerator, air conditioning | multifunction steering wheel, cruise control, | auxiliary heating, radio/CD, DTS | digital speedometer, differential lock | errors and omissions excepted. Djdpfx Ajvia Nxeh Uskw

Condition: used, 0532 EN61558 / 0532EN61558, DT 25 / DT25, Dipl.-Ing. Herbert Barth Transformatoren GmbH Three-phase transformer 25kVA Dkedpfx Asq S T Dboh Ujw Model: 0532 EN61558 Type: DT 25 Condition: Used

Year of construction: 2013, condition: excellent (used), machine/vehicle number: MV0055-000189, Vertical machining center with 3 axes with automatic rotopallet DOOSAN DT 360D/40 FANUC 0I-MD Accessories: chip conveyor Meta with 300 litres tank litres high pressure pump Calpeda pump for washing predisp. Robot interface Dkodpfx Ahoga Efcj Uew pre-set Locking... Total auto switch-off Tool life management

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, three-phase isolation transformer -Manufacturer: Strobelt, single-phase transformer type DT-00104 -Power: 2500 VA -Technical data: see photo nameplate -Dimensions: 260/140/H230 mm -Weight: 30.2 kg Dkodpon Nzh Tefx Ah Usw

Condition: excellent (used), mileage: 192,835 km, power: 70 kW (95.17 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,500 mm, first registration: 02/2017, fuel tank capacity: 75 l, emission class: euro6, color: white, tire size: 205/65R16, number of seats: 6, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, electronic stability program (ESP), fog lights, navigation system, parking sensors, power assisted steering, sliding door, soot filter, trailer coupling, General information Number of doors: 5 Cab: double Registration number: V-542-DT Technical information Number of cylinders: 4 Engine capacity: 1.598 cc Drivetrain AdBlue system: Yes Transmission Transmission: 6 gears, Manual gearbox Axle configuration Tyre size: 205/65R16 Brakes: disc brakes Front axle: Alloy wheels; Max. axle load: 1585 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Alloy wheels; Max. axle load: 1650 kg; Tyre profile left: 40%; Tyre profile right: 40% Measures Dimensions (LxW): 540 x 196 cm Weights Empty weight: 1.875 kg Carrying capacity: 1.065 kg GVW: 2.940 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Interior Interior: black Environment CO2 emission: 30 g/km Consumption Average fuel consumption (WLTP): 6,7 l/100km (42 MPG) Urban fuel consumption (WLTP): 8 l/100km (35 MPG) Extra urban fuel consumption (WLTP): 6 l/100km (47 MPG) Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Number of keys: 2 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Euro 6 - Front fog lights - Multifunctional steering wheel Dodpfxewqdlfs Ah Uskw - Panelling - Sliding side door right - Towbar

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Djdpfxjfifg He Ah Ujkw Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: used, mileage: 1,096,400 km, power: 340 kW (462.27 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 8,477 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 2 axles, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, rear tire size: 315/70 R 22,5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, onboard computer, parking heater, spoiler, truck registration, | DAF XF 460 Super Space Cab, EURO6 | Automatic, Intarder, electric windows | Refrigerator, air conditioning, stationary climate control | Multifunction steering wheel, cruise control | Auxiliary heating, radio/CD, DTS | Differential lock | Lane departure warning, adaptive cruise control | Tires: front axle 385/55R22.5, rear axle 315/70R22.5. Errors, input and advance sales excepted. Djdpov Tz Scefx Ah Uskw

Condition: new, Year of construction: 2025, DT 1500 Grinding Table for Woodworking: Table dimensions (without supporting grid): 1350 x 693 mm – This table area provides sufficient space for working, allowing for the processing of various elements. Supporting grid dimensions: 1440 x 800 mm – The supporting grid provides additional support for the processed materials, increasing stability and work precision. Maximum load capacity: The table is designed to withstand loads of up to 200 kg, enabling the processing of larger elements. Required dust extraction efficiency: The device requires a dust extraction system capable of processing at least 1500 cubic meters of air per hour to ensure proper ventilation and removal of contaminants. Table height adjustment: With height adjustment ranging from 735 to 995 mm, the user can tailor the device to their specific needs and preferences, enhancing work comfort. Application of the Grinding Table: This grinding table is an excellent tool for professional grinding operations in various sectors of the woodworking and furniture industries. The compact design of the workstation makes the product suitable for any workshop environment, enabling material processing, for example, before painting. Thanks to its high-quality construction and adjustable features, it allows for precise and effective work while maintaining appropriate safety standards. Technical Parameters: Length: 1570 mm Width/Depth: 1020 mm Height (adjustable): 735 - 995 mm Net weight: 73 kg Table dimensions (without supporting grid): 1350 x 693 mm Dksdpfx Ahovugx Rs Uow Supporting grid dimensions: 1440 x 800 mm Maximum load capacity: 200 kg Required dust extraction efficiency: 1500 m³/h Dust extraction port diameter: 160 mm Note: The price quoted is the net price. It does not include transportation costs.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1127626, table width: 400 mm, table length: 600 mm, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Table size: 400 x 600 mm EQUIPMENT - Chip conveyor - Tool changer Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 Dkedpfx Aowqcqysh Uew Further details according to manufacturer - without guarantee Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Tool taper: BT 30 T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 51 mm Tool length: 178 mm Tool weight: 2.5 kg Tool slots: 20+1 Machine dimensions: approx. 2.6 x 1.7 x 2.6 m Machine dimensions transport: 2.5 x 2.0 x 2.5 m Weight: approx. 2.4 t

Year of construction: 1999, condition: used, Granulate dryer, compressed air dryer, continuous dryer, granulate drying system -Manufacturer: digicolor, granulate dryer type Dehumidifying Dryer Dedpfx Aholb Iv Ns Uekw -Mod.: DT 204 M -Power: 10000W -Side channel fan: Siemens Elmo-G 1.5 kW -Individual components: see photos -Dimensions: 1020/610/H1550 mm -Weight: 241 kg

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Dkedpfx Asd Srk Sjh Uow Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1140165, Machine from the insolvency of an automotive supplier Dkjdswqcqtopfx Ah Uow TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further details according to manufacturer - without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: used, Wire electrode, welding wire, welding wire -Manufacturer: Bohler, started roll of MAG wire electrode -Type: DT 1.4829 AWS: ER 309 Ø 1.2 mm -Dimension: Ø 300/100 mm Djdpfx Ahsfu Trke Uekw -Weight roll: 12.8 kg

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Dedpfx Ahjdx Rd Ns Uekw Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2320005, travel distance X-axis: 550 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 375 mm, number of slots in tool magazine: 40, Equipment: chip conveyor, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Control: Siemens 840 DSL Travel X-axis: 550 mm Travel Y-axis: 450 mm Travel Z-axis: 375 mm Tool changer Capacity: 40-fold Tool holder: HSK63 Chip disposal Chip conveyor: Knoll 440S-1/250 Year of manufacture: 2017 Cooling Coolant treatment system: Knoll Further auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 Further information according to manufacturer - without guarantee Swivel table / counter bearing with face gear: Swivel time 0 - 180° approx. 3.0 s Preparation for A- and U-axis: yes Accommodation for clamping blocks X / Y: yes Speed range A- and U-axis: 1 - 50 rpm Speed range C-axis: 7-fold / 4-fold Speed range: 10 - 10,000 min⁻¹ (1 - 17,500 min⁻¹) Acceleration time t₀ - 4: 0.45 s Drive system: Ball screw Rapid traverse X / Y / Z: 75 / 75 / 75 m/min Dksdpewqcqmefx Ah Ujw Tool changing system: Pick-Up Max. tool diameter: 70 mm / 160 mm (adjacent slot free) Max. tool length: 275 mm Max. tool weight: 7.5 kg Transport dimensions L x W x H: 2.75 x 2.85 x 2.65 m Max. table load: 1,000 kg Machine weight: 8.3 t Total connected load: approx. 64 kVA Control: Siemens SINUMERIK 840 D

Condition: new, Year of construction: 2024, High-performance press brake AD-S 40400 from DURMA: A masterpiece of technology! The DURMA AD-S 40400 press brake combines precision, power and efficiency in a robust package designed specifically for demanding environments. This model not only offers outstanding performance and reliability, but also a wide range of high-quality standard features and options that make it an indispensable tool in your production. Technical data: ・Bending force: 400 tons ・Bending length: 4050 mm ・Clearance between the uprights: 3400 mm ・Rapid speed: 100 mm/s ・Working speed: 8 mm/s ・Return speed: 80 mm/s ・Motor power: 37 kW ・Weight: approx. 27,760 kg Features and benefits: ・Control: With the optional DELEM DA-66T touchscreen control for unsurpassed speed and ease of operation. ・Rugged construction: Reinforced frame for loads up to 200 tons ・Flexibility in use: With 2 support arms and a backgauge with two finger blocks and controlled X-axis for versatile applications. ・Advanced motor power: Equipped with AC servo motor for back gauge and ball screws, it provides fast and precise movements. ・Highly advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising on performance. Standard equipment: ・Y1, Y2, X (=650mm), R manual (2 stop fingers) ・Control DT 15 ・Manually adjustable F.AKAS II M CE safety system (on ram) (CE) ・CNC crowning ・Support arms with T-slot and spring-loaded folding stop, laterally adjustable on Dksdpfx Asrwniqjh Uow linear guide ・Durma tool system holder ・AC servo motor for backgauge and ball screws ・Shields at the side and rear Options: ・DELEM DA-66T touchscreen control for intuitive operation ・6 axes - Extended X/R/Z1/Z2 X=750 mm backgauge options ・Reinforced frame, designed for a load of 200 tons per 1 meter, total pressing force is maximum 400 tons Price information: ・The price quoted is for the machine only. Tools and freight costs are not included.

Condition: new, functionality: fully functional, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) Dsdpfx Ahstr Dk Ej Uokw press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 30220 bending length: 3050 mm Press force: 2200 kN Control: CNC DT-10 Operating hours: 0 h Controlled axes Backgauge: X,R Dksdod Srk Espfx Ah Ujw passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 250 mm/s Infeed speed: 140 mm/s folding speed: 10 mm/s retraction speed: 140 mm/s Dimensions L/W/H: approx. 4250x1770x2900 mm Weight: approx. 12250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European tool clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guidance along the entire length Backgauge motorized with linear guide & ball screw Backgauge finger height adjustable Back stop motor Servo Safety covers lateral CE Marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC-B-C+ safety cover & switch Controlled axes X,R-axis, Z-axis manually adjustable Quick clamping CNC controlled motor-driven crowning The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length X ton) 3050mm x 175t Dkedpfx Ahettatbs Ujw Installation height 530mm Outreach 450mm Stroke 265mm Y1, Y2, X - 3 axes Control unit - DT 15 Manuel F. AKAS FPSC safety system CE F.AKAS BVLT light barrier and safety cages (for tandem press brakes) Servo motor backgauge & linear guide & Ball screw system (X) Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard -Electrical equipment according to worldwide standard Selected options -Control unit - Delem 66S - NEW -Motorized crowning - X=650mm X,R, Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Dodsfirwmspfx Ah Uokw Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports _____ With over 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced manufacturing facilities

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. DURMA press brake AD-S 30320 Standard equipment Capacity (length X ton) 3050mm x 320t Dedpfxet Dvl Uo Ah Uokw Installation height 630mm throat 450mm Stroke 365mm Y1, Y2, X - 3 axes Control unit - DT 15 CE Fiessler Akas manual light barrier Servo motor backgauge & linear guide & Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard Electrical equipment according to worldwide standard Options: Delem 66T Motorized crowning Motorized X, R-axis backgauge X=650mm X and R Lower tool European M.460R.85 Top tool European P135.75.R08