Used Electromagnetic Plate for sale (12,719)

Condition: used, Electro sinus magnetic chuck, sinus magnet, E-sinus magnetic clamping plate Length: 255 mm Width: 130 mm Height: 120 mm Voltage: 110 V DC (direct current) Rated current: approx. 0.4 A Rated power: approx. 40 W The magnet is tiltable up to 90° and has a sinus support surface. Net weight: 29 kg Lsdpfxoxcimis Afzjrg

Condition: good (used), Year of construction: 2007, Electric magnetic chuck including electronic pole reversal control unit, Lrodpfxjlbggte Afzeg control unit and keypad complete Please contact us if you are interested !

Condition: good (used), Machine number: 140824 Type / Model: 50 / 150 Size: 1,500 x 500 mm Height: 110 mm Connection: 110 V Accessories / Equipment: Condition: good Weight: 470 kg Dimensions: 1,600 x 500 x 110 mm Ledpfsxc Nnaex Afzsrg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Lrjdpfx Aowk Rlxefzeg max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg Lrodoxqqlcepfx Afzog EQUIPMENT Height gauge Vice with 100 mm jaw width

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 • Load capacity: 3,000 kg Lrodpfx Afow Hhwwezeg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T Lsdpsh Auahefx Afzerg

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T Lsdpfxswtc Hgo Afzsrg

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Lrsdpfx Aswlhd Uofzsg Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Marble plate Ljdpfx Afoig Hu Nszsrg Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T Lodpfx Aowlhflofzsrg

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm Lrsdewnfz Nepfx Afzjg 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: ready for operation (used), total length: 2,700 mm, total width: 750 mm, total height: 1,000 mm, empty load weight: 1,420 kg, nominal power: 2.2 kW (2.99 HP), conische buiging met geharde rollen met gemotoriseerde backroll Number of rolls: 3x Roll capacity cold: 1550 x 6 mm Roll dia upside: 140 mm Lredpfxoxzvp Us Afzeg

Condition: ready for operation (used), Directe aandrijving; 2 aangedreven rollen Conische buiging Geen fundering nodig Automatische drukbalans tussen boven- en onderrol Automatische smering De onderste rol kan worden versteld door middel van druk of positie. Number of rolls: 4 Lrsdjx Enfxspfx Afzeg Roll capacity cold: 3100 x 20 mm Roll dia upside: 370 mm Pre-bending: Yes

Condition: ready for operation (used), empty load weight: 19,000 kg, nominal power: 33.526 kW (45.58 HP), Boven- en onderrol worden aangedreven (planetaire tandwielkast) Conische buiging Lrjdpfx Ajx Dd Hyofzog Automatische gelijktijdige balancering Onderste rol excentrische balk Number of rolls: 4 rolls - 2 roll driven Roll capacity cold: 3100 x 32 mm Roll dia upside: 410 mm Dia under roll - side rolls: 370 - 300 mm

Condition: good (used), Year of construction: 2006, sheet width 3100 mm Lodpfx Afsycxgmozjrg plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m². Ledjtq I Rqjpfx Afzerg

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate Ledpfx Aeb A Nbnsfzjrg -Dimensions: 2280/1060/40 mm -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Ledpfx Afjyckt Sezjrg Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Lrjdpfoyckt Eex Afzsg Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Lsdoycktrspfx Afzjrg Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Year of construction: 2008, condition: good (used), Item: D-7802-APV-Heat Exchanger Lrsdef Srmzjpfx Afzog Stainless Steel Heat Exchanger Type APV H17, Temperature max. 110 C From 2008. Nominal Capacity: 20,5 kW Transmission: 2,7 m2 Press: 4,5 Bar

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Lredpfxopgndgs Afzog Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: used, Year of construction: 2009, Technical details: sheet width: 3000 mm plate thickness: 6 mm stroke: 102 mm back gauge: 1000 mm total power requirement: 11 kW dimensions of the machine ca.: 3900x1950x1700 mm Lsdpfsybbz Dex Afzorg weight of the machine ca.: 5650 kg

Condition: used, machine/vehicle number: YS2R6X2000201xxxx, mileage: 405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 21128 Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Ledpsw Raf Hefx Afzjrg Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil m/ brøyteplate og underliggende skjær. SE VIDEO