Used Electronics Boards for sale (10,210)

Condition: used, Year of construction: 1995, Mitsubishi Operation Board 4YZ405B-3 for MAZAK MULTIPLEX 620 MARKII For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: 4YZ405B-3 Manufacturing Date: 1995 Made in Japan Dcsdpfxjzn Akro Apwsk Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 620 MARKII May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Djdpfxezn Akle Apwsck Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCE Type: AC Spindle Controller / Spindle Drive Djdpjzn Akfefx Apwock Power Rating: 26 kW Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Year of construction: 1990, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Dcedpfx Aezn Ai Iopwjk Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Dcedpfxjzn Aize Apwjk Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Year of construction: 1970, centre height 120 mm spindle bore 20 mm Dcedpfx Ajzndt Ijpwjk copying device ja kW weight of the machine ca. 3 t

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Dsdpfx Ajzrk Slspweck Axle 3: left 6 mm right 6 mm

Condition: used, Year of construction: 1992, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm Dedpfx Apovntdmowsck – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Dodpfozrzxijx Apwsck Powered tools: possible depending on equipment Tailstock: optional, often NC-controlled (SK30)

Condition: used, Year of construction: 2002, turning diameter 290 mm Dsdpfjzrzxcjx Apweck turning length 850 mm swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Dsdpfx Asydfpdjpwsck Turning length: 850 mm Rotation diameter over table: 600 mm x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm

Condition: used, Year of construction: 1996, turning diameter 250 mm turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t Dcsdpfx Aeyan R Aspwsk PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: used, Year of construction: 1980, serial number 36884 centre distance 1000 mm 520 mm Dcodpfxozmixts Apwek weight of the machine ca. 2 t

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm Dcjdezl E T Dopfx Apwsk centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: new, FANUC MONITOR D12CM-01B - A61LL2 - NEU OZUCHI Condition: NEW, incl. packaging Dcjdjzman Sspfx Apwjk

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI Dcsdpezhwvpofx Apwok History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: used, Year of construction: 2017, spindle bore 58,0 mm turning diameter 430 mm turning length 760 mm turning dia. in gap 690 mm centre height 235 mm turning speeds 20 - 2000 U/min quill: 4 MK bed width 300 mm weight of the machine ca. 1700 kg Features: - Digital display - 3-jaw chuck - Multifix - Tool holder - Removable bridge Dedpezlulisfx Apwjck - Machine light - Chuck guard - Lockable emergency stop - Machine light - Coolant system - Operator's manual

Condition: used, turning length 1000 mm turning diameter 330 mm turning dia. over face-slide 198 mm turning dia. in gap 476 mm spindle bore 38.0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper DIN ISO 702-2 Nr. 4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1.5 kW weight of the machine ca. ca. 610 kg. range L-W-H 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped with ribs - The speed and feed rate adjustment is simple in design, smooth-operating, and Djdpfxozlukxj Apweck . can be shifted precisely Scope of delivery: - 3-jaw chuck - MULTI-FIX tool holder with insert - Safety guard for the 3-jaw chuck - Slip clutch - Coolant system - Foot pedal with brake function, CE-compliant - Rear splash guard - Machine light - Base frame

Condition: ready for operation (used), CAPE BRAND EPAL BEVELING MACHINE WORKING. MAXIMUM SIZE 2500mm Dsdok Nf S Uopfx Apweck

Condition: good (used), Year of construction: 2009, functionality: fully functional, Recycled board end-cutting machine. Dcedpfjurmqdex Apwjk Utilization of recycled board

Condition: used, turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning length 800 mm turning speed range 24 - 2800 U/min spindle bore 38,0 mm centre height 155 mm tool adaptor DIN 55022 total power requirement 3,0 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1,9 x 0,7 Höhe: 1,3 m Features: - Heavy-duty lead/feed screw lathe - RÖHM three-jaw chuck, Ø 160 mm - Foldable lathe chuck guard Dcedpfx Aezlkwhopwjk - Chuck wrench - Multifix tool holder - Sliding tailstock - Automatic feeds for face and top support - Machine base with cabinet door (storage space) - Emergency stop button

Condition: used, Year of construction: 1985, turning diameter over bed 340 mm turning diameter over slide rest 260 mm turning length 700 mm spindle bore 48 mm Djdpfx Ajzlkwbepwock spindle turning speed range 25 - 2000 U/min spindle nose DIN 55027 KK 5 voltage 380 Volt total power requirement 2,2/4,4 kW weight of the machine ca. 1000 kg. dimensions of the machine ca. 1.800 x 700 x 1.500 mm

Condition: ready for operation (used), Year of construction: 2002, Professional, heavy-duty version by HANG (German quality) in neat, complete condition. Highly suitable for binderies, printing shops, and print departments. ⸻ Specifications • Brand / Model: HANG 107-30 electronic • Serial number: 102553 • Year of manufacture: 2002 • Number of drilling heads: 4 pieces, individually adjustable • Electronic control, automatic drilling cycle • Power connection: 400V – 50Hz – 6A • CE certification present • Cast iron frame, extremely robust construction • Manual and automatic operation • Adjustable stops with fine adjustment • Machine is mounted on swivel casters (easily movable) ⸻ Condition • Removed from production in working order • Drill spindles and guides run smoothly • No damages, normal signs of use • Immediately ready for operation • Complete, as shown in the photos ⸻ Description The HANG 107-30 is one of the most robust paper drilling machines on the market. Heavier-duty and more professional version than the standard models, thanks to the sturdy drilling heads, automatic drilling cycle, and reliable electronic control system. Perfect for calendar production, book blocks, brochures, index tabs, and more. ⸻ Price 👉 € 3,250 net (0% VAT export possible) Dcodpfxox A Izlj Apwsk

Condition: new, HEIDENHAIN TE 535M - Control panel - NEW ID 538 005-01 SN 25 312 561 A Djdjzk Rinjpfx Apwock Condition: NEW, incl. packaging

Condition: new, FANUC SERVO AMPLIFER MODULE Dcedpfezk Rihjx Apwjk Type: A06B-6079-H106 Condition: New, including packaging