Used Elumatec Kf 78 for sale (135)

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Bjdjy Sxr Nopfx Amrolk Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Bjdpew Syzqofx Amrjlk Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: Bodpfx Amjyxnx Serslk With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Travel: 120 mm

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg Bledezmn N Repfx Amrsk

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 178000012, Machine in new condition, barely used. Bledpfxezk Ndqj Amrek

Condition: excellent (used), Shipping within the EU: 350 euros Bodol Sklgopfx Amrslk

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Bljdpjzcz Dnefx Amrok Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Blodpfxjy D I R So Amrsk Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 EU shipping - 350 euro Blodpfevi R Avsx Amrjk

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 21,000 rpm, working length: 3,750 mm, TECHNICAL DETAILS Machining length with bar support: 3,750 mm Machining length without bar support: 3,500 mm Travel range X-axis: 3,500 mm Travel range Y-axis: 280 mm Travel range Z-axis: 300 mm Positioning speed: 30 m/min Positioning accuracy: ±0.1 mm Spindle power: 6 kW Spindle speed: 21,000 rpm Spindle interface: HSK F63 Tool positions: 5 Max. tool diameter (manual): 200 mm Max. tool diameter (automatic): 92 mm Max. saw blade diameter: 500 mm Bledpfx Amsznczksrjk MACHINE DETAILS Air consumption: approx. 50 l/cycle Compressed air requirement: > 7 bar Power supply: 400 V, 3-phase Note: The machine's operating hour counter is defective and cannot be read. The machine was only used in a single-shift operation.

Year of construction: 2009, condition: used, 3-axis machining center for aluminum or PVC profiles for top-side processing Max. Travel distance X-axis: 2,450 mm Bodpfxozrhd Eo Amrelk Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Windows control with 2 USB connections Speed up to 18,000 rpm. Minimal quantity spray device 4 pneumatic material clamps Light barrier

Year of construction: 2013, condition: used, Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm Windows-based control E 555 with touch display Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45 and 90 degrees Digital angle displays Blodpfxozqbp Ee Amrjk Moving roller conveyor Chip suction on both units Minimum quantity spray device label printers Machine is loaded free

Year of construction: 2012, condition: used, Elumatec AF 222 End Milling Machine, the Machine Transoms & Door Profiles in Aluminium or Plastic, Cutting Range up to 400mm, Tool Diameter up to 280mm. S/No. 2220025315 (2012). Country of Origin: Germany Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges. Bsdpfx Amszqdw Eerelk

Condition: good (used), Precise work is achieved through sawing from below. A large swivel range of up to 45° to the left and up to 0° to the right is provided. The special swivel mechanism with an integrated rotary table allows work to be performed from the front at all angle settings. A workpiece stop that can be shifted towards the rear enables optimal use of the saw blade capacity when processing wide and flat profiles. Manual saw feed. Comes standard with a saw blade and base frame. Pneumatic material clamping device (vertical). Metering spray device. Maintenance unit. Bledszdi Nmopfx Amrok

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1240024759, overall weight: 545 kg, The ideal machine for curtain wall elements For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 Kg Bodpszrn N Iofx Amrelk We can ship the machine (On demand)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, It was used for pressing corners. Blodezrhudspfx Amrek

Condition: ready for operation (used), functionality: fully functional, It was used for pressing corners. Bljdpfezrht Hex Amrjk

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 124169101-03-EN-EP124, Equipment: 3rd hydraulic function, It was used for pressing corners. Bodpfx Aozrhr Nsmrolk

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 1012331637, Precision Vee-cuts in aluminium and PVC profiles Pneumatic continuously adjustable saw blade feed for fast and precise sawing with rapid return Simple setting of cutting depth Equipped with connection for swarf extraction hose and swarf container as standard Equipped with pulsed coolant system Blsdezrcfqepfx Amrjk Cutting range for Vee-cuts: cutting depth 60 mm, profile height 100 mm Saw blade diameter 254 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.9 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 44 l with spraying Length 980 mm, depth 800 mm, height 1,650 mm, weight 240 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 20303, cutting length (max.): 4,500 mm, saw blade diameter: 500 mm, pressure: 7 bar, Tilting range pneumatically from 90° to 45° Saw blade diameter 500 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 4 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 32 l with spraying Blsdpfx Asy Ah Hksmrek Ideal machine for high-volume series production when cutting at 90° and 45° Vertical pneumatic material clamping unit Machine is prepared for operation We can offer professional assembly

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 5,000 mm, feed length X-axis: 500 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, compressed air connection: 7 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Rotational speed: 2,800 rpm Feed length per cycle: 5,600 mm Bljdpfx Aozqbltjmrjk Cutting angle: 90° Miter function depending on machine configuration MACHINE DETAILS Suitable materials: Aluminum profiles, thin-walled light metal profiles, window and door profiles Power supply: 230/400 V, 3~ Frequency: 50 Hz Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0733337017, Swivel range: 0° to 45° adjustable in both directions, steplessly. Locking points: At 15°, 30°, and 45°. Saw blade diameter: 380 mm. Saw blade speed: 2800 rpm. Blsdpjzphi Nofx Amrsk Power output: 3 kW. Compressed air connection: 7 bar. Dimensions L x W x H: 850 x 900 x 1450 mm. Weight: 250 kg.

Year of construction: 2021, condition: good (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, controller manufacturer: ELUMATEC, controller model: SBZ 122-ELUCAM, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 24 A, feed rate X-axis: 120 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.1 mm, spindle speed (max.): 20,000 rpm, tool length: 150 mm, number of slots in tool magazine: 12, ELUMATEC 122/73 CNC bar machining center - Frequency: 50/60 Hz - Max. machining length without end-face machining: 4050 mm - Machining direction (front and back) Bedpfozktdzex Amrslk - Disc cutter diameter: 120 mm - Clamping cylinder displacement, automatic - Tool holder: HSK-F 63 Note: The item must be collected between September 22nd and September 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: used, Max. cutting length: 4,500 mm Blsdpfszi A Uajx Amrek Max. saw blade diameter: 380 mm Manual positioning of the saw assembly with digital length display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-Hand-Bedienung

Condition: excellent (used), working very well Bsdpozi Szvefx Amrslk