Elumatec sbz 130 for sale
Identified location: Ashburn (US) (Edit)
1996
ready for operation (used)
Sofort ab Standort frei :
Elumatec CNC Rod machining center
Type SBZ 130
Bv83eymc
Baujahr 1996
X weg 6500 mm
y weg 400 mm
z weg 285 mm
Werkzeugwechsler 8 fach
Winkelkopf hinten und vorne
Zweikreisspannsystem
Winkelkopf L und R nicht montiert
8 Materialspanner
Werkzeugin Nr. 4 nicht im Lieferumfang more
Aluminium profile processing centre make ELUMATEC type SBZ 130/01
Machine # 20040 Ser.# 943029, year of construction 1994
Technical data:
max. machining length X 7200 mm
max. machining width Y 485 mm
max. machining height Z 340 mm
Traversing speed 30 m/min.
Travel accuracy 0.1 mm
max. spindle speed 6000 rpm.
Tool holder BT 30
Feed rates Y and Z 18 m/min
Feed rate X 45 m/min
Tool length max. 200 mm
tool diameter max. 80 mm
Tool changer with 8 tools.
Tool change time 1.2 sec
Drive power 5,5 kW
Ext... more
1994
defective spare-parts repository (used)
movements x/y/z: gross/klein 6500/300 mm
spindle turning speed range: 5400 rpm
number ob tool positions: 8 pieces
carriages: x/y u. z 60/30 mm/miin
spindle drive: max. 5,5 kW
The machine is sold as a spare part carrier because the controller is defective.
electrical connection: 400 V kW
space needed: 8600 x 2270 x 2150 mm
Ptvbci7
weight: ca. 5000 kg more
Elumatec Servomotor FMR071-12-60
- for SBZ 130 spindle
- refurbished by the manufacturer (in 2016)
- 1 year warranty
Bccerdlzfc more
2006
excellent (used)
The 2006 Elumatec SBZ630 is a complete aluminum profile processing center designed for Window, Door & Curtainwall. The fully automated machine can be loaded with up to 10 profiles, with width up to 135mm (5.35”) & 7.5m (295’) in length. Profiles can be cut to precision sizes and machined with incredible accuracy. The design allows for machining to be done on all 4 planes of the profile. It has been kept in immaculate conditions with newly replaced motors and recently serviced loading magazine an... more
CNC 5-axis bar machining Center
For the economical and rational processing of aluminum and
thin-walled steel profiles.
All operations, such as routing, drilling, tapping, thread milling, notching
and sawing, are performed while the profile bar is stationary to protect the
E7exsawbu
profile surfaces
6-sided machining. From below with angular head (option)
Condition: Very good, can inspected in production under power.
The machine was used max. in single shift
Milling area:
X-axis ... more
5 - axis power for universal use, type ELUMATEC SBZ 150/ 7,30 m
in very good running condition (about 3.400 spindle hour)
- Processing in aluminium: Drilling, routing, taping, cutting and notching
- Processing in steel: Drilling, routing, taping
- Electronic 5- axis industrial PC- control
- Six- side processing (from the bottom with angle head)
- Max. processing length 7.000mm
- Automatic tool changer with eight standard tools and three spezial tools
(spezial tools: sawblade, angle head and s... more
2008
ready for operation (used)
Main Drive
Biwjnycea0
Spindle speed range 20000
This Elumatec SBZ 608 Machining Center was built in the year 2008 in Germany. This machine can work with a spindle speed up to 20000 rpm. It is a post-processing center for fixing reinforcement, drilling and milling of sawn profiles in the production of Windows, doors and facade structures with and without steel reinforcement. It is designed as a portal for profiles with a high cross-section. The technological cycle is optimised for the process p... more
2004
excellent (used)
4 controlled axes
Max. machining length: 6400 mm
Bldcgxslm
Y-axis travel: approx. 850 mm
Z-axis travel: 650 mm
Swivel angle A axis: 0-180°
Max. spindle speed: 21,000 rpm
Max. side milling cutter diameter: 200 mm
Number of tool places: 12 plus angle head
Chip conveyor belt
Clamp displacement
Barcode scanner
Windows operating surface
Two working zones separated by light barriers (shuttle operation possible)
Machine is loaded freely, can be demonstrated by arrangement
Weight: approx. 5.000 kg more
3-axis machining center for aluminum profiles
Control system: Elumatec
Power on time: 8136 h
Total Operation time: 3262 h
Power of the spindle drive: 7 kW
Maximum rotary speed of the spindle: 24000 1/min
Travel length X-axis (mechanical feed): 3850 mm
Travel length Y-axis (mechanical feed): 350 mm
Travel length Z-axis (mechanical feed): 280 mm
Maximum feed rate in X-axis: 60 mm/min
Maximum feed rate in Y-axis: 30 mm/min
Maximum feed rate in Z-axis: 30 mm/min
Max. tool lenght: 150 mm
... more
Machining centre vertical SBZ 122/33
Hersteller: Elumatec
YP: 2015
Epim28www
Control system Elumatec ... E 500
Clamping table surface ... 3850 x 350mm
Axis X ... 3850mm
Y axis ... 350mm
Z axis ... 280mm
Spindle speed ... 0-24000 / min.
controlled axes ... 3
HSK-F63
Main engine power ... 7kW
Machine weight ... 1940kg
L x W x H ... 5100 x 3400 x 2560mm
Accessories, documentation
The machine is in good condition, possible to test under power. more
This all-rounder offers maximum flexibility as a profile machining centre. Total profile machining of profiles without steel reinforcement.
Profile machining centre for cutting to length, drilling and routing profiles for window, door and curtain wall manufacturing without steel reinforcement and with screwed transom connections
Work sequence as needed, either from the left towards the right or the reverse
Infeed with motorised, continuously adjustable gripper
Lifting function for ... more
2007
good (used)
The 3-axis CNC rod processing center ELUMATEC SBZ 122 is designed for 5-sided profile machining
such as automatic door production with single or multiple locking or other applications from industry.
A rotary device integrated into the spindle allows the rotation angle head to be set to 0°, 90°, 180° and 270°.
This allows a profile to be machined from the front, back and end side with two different tools.
(5 page editing)
Technical data:
- Travel X-axis 3,850 mm, V max. 60 m/min.
- Travel... more
2012
excellent (used)
Rapid succession centre for reinforcement screwing, drilling and milling of profile blanks for window, door and facade construction with and without steel reinforcement.
Designed in portal construction for high profile cross sections and process-optimized throughput. Additional efficiency through parallel processing of the outsourced reinforcement screwdriver
Capacity feeding magazine eleven profile bars
Part lengths 300 - 4,000 mm
Dlygbfvsg
Profile cross-sections W x H up to 130 x 205 mm
Capaci... more
Used SBZ 150 construction 1999
CNC 5-axis bar machining Center
For the economical and rational processing of aluminum and
thin-walled steel profiles.
All operations, such as routing, drilling, tapping, thread milling, notching
and sawing, are performed while the profile bar is stationary to protect the
profile surfaces
Milling area:
X-axis 9000 mm / Y-axis 1000 mm / Z-axis 650 mm
Feeds X / Y / Z 60/30/30 m / min.
A-axis swivel angle: 0-90 deg freely programmable
Swivel angle C-axis 0-355 deg ... more
2019
new
front cover for your Elumatec E550 terminal
7zrls9ln2
for IPC10.8 104168006 und IPC10.7 104168010
we optional offer complete terminals and Elumatec repairs more
Machining centre for PVC windows Screwdrivers for reinforcement, machining of drains, ventilation, hinges, construction drills, marking of locks, drills for crossbeams, collectors...
Cddcy2ou more
2007
excellent (used)
Technical data:
-traverse path X-axis 3,850 mm, up to 50 m / min.
-Stroke y axis 350 mm, V up to 30 m / min.
-Traverse path Z-axis 280 mm, V up to 30 m / min.
Bc8wifkvxa
-Spindle speed 21.000 1/min.
-Dimensions of the machine: L x B X H = 5,100 x 3,400 x 2.560 mm
- weight 1690 kg
equipment of the machine:
-equipped with a 5 Pocket tool changer
- the tool holders and some tools
- to a rotating double angle head
- release detection
- photoelectric belonged more
5- axis control profile machining center Elumatec SBZ 151/7,30 m/ date of construction 2011, in good condition
- Designed for flexible and efficient machining of aluminium and thin-walled steel profiles.
- All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces.
- Fast positioning of the machining unit with up to 66 m/min thanks to dynamic servo drives.
- New generation of compute... more
2007
excellent (used)
Technical data:
-traverse path X-axis 3,850 mm, up to 50 m / min.
-Stroke y axis 350 mm, V up to 30 m / min.
-Traverse path Z-axis 280 mm, V up to 30 m / min.
-Spindle speed 21.000 1/min.
-Dimensions of the machine: L x B X H = 5,100 x 3,400 x 2.560 mm
Bc8wifkvxa
- weight 1690 kg
equipment of the machine:
-equipped with a 5 Pocket tool changer
Ju3bvy
- the tool holders and some tools
- to a rotating double angle head
- release detection
- photoelectric belonged more
refurbished Elumatec spindle for SBZ 122 machines
Nnq9d
for any questions contact us:
spares[at]finke-maschinen.de
we offer a wide spectrum of electronic parts for Elumatec machines. more
We offer a wide spectrum of electronic parts for Elumatec machines
new- and refurbished parts with 2 years warranty
"plug and play" with suitable firmware and parameters for all
Elumatec machines
See catalog attached
SBZ 122, SBZ 130, SBZ 140, SBZ 150
Cqbak72bk more
We offer a wide spectrum of electronic parts for Elumatec machines
new- and refurbished parts with 2 years warranty
"plug and play" with suitable firmware and parameters for all
Elumatec machines
V0lmynnj
See catalog attached more
2004
refurbished (used)
Rod machining centre Elumatec SBZ140, 4 axes,
Machining length X= 6300mm
Y= 600mm
Z=300mm
Space requirement approx. 8400 x 3200 x H=2800
Main spindle new general overhauled
A-axis: gear, motor, rollers new
X-axis linear guide, bearing and controller new
Y-axis: Threaded spindle and bearing new
Z-axis: motor, toothed belt and rollers new
All capacitors on the main power supply module replaced
Air conditioning new
Cover blind on tool magazine new
Remote control with 10m cable new
Wiring harness se... more
1988
used
Copy milling machine, copy router, hand lever milling machine, hand lever milling machine
-For the machining of aluminum and steel profiles
-Motor 0.75 kW 6,000 / 12,000 rpm
-Dimensions 1500/800 / H1420 mm
-Weight 114 kg
Nn8g2 more
1986
ready for operation (used)
Two MWM 130 KW landfill gas CHP generators
type: G 232 V12 from 1986 for sale.
Scope of supply:
Control pannel,muffler,water heat exchanger,
Yle8mog
gas train,exhoust gas heat exchanger.
engine: MWM
type: G 232 V12
powerrating: 130 KW
YOM: 1986
voltage: 400 volts
speed generator: 1500 r/min
fuel: landfill gas
Stromerzeuger-Discount.com
Kürtener Straße 13
D-51465 Bergisch Gladbach more
2016
good condition (used)
Machine design:
- Hydropneumatic feed
- Suction
- Pneumatic clamping horizontal
- Depth stop
- E111 tilt
Operating data:
- mains voltage 3/PEN/400V
- Frequency 50Hz
- Current 12A
- Power 5,6kW
- Compressed air 7bar
- Saw blade diameter 500mm
- Saw blade speed 2800 1/mm
Dimensions and weight:
- length/width/height (mm) approx. 910/1335/1840
- Weight approx. 550kg
Sound:
- Continuous sound level ᐳ80dB(A)
The machine is in mint condition and stored disassembled.
Bjkyd3sfjt
The sale is ex location.
... more
2000
good (used)
Max. cutting length: 6000 mm
Saw blade diameter: 550 mm
Sqr2lgkj
Automatic positioning via E 500 control
Pneumatically lifting material support
Moving roller conveyor
5 motor controlled axes (positioning length, 2 x swivel + 2 x tilt)
Label Printer
Machine is mounted on wooden pallet ready for transport more
Machining Centre with:
- Tool changer 4 seats (max. 4 available)
Cgfoeqfo
- Tool changer for rotating angle head (max. 2 available)
- Rot. angle head; compl.; 4 x 90°; ER20; 15.000 1/min.; ED60+S3
- Length measuring, both sides
- Stop, right with 2nd clamp circuit, overlength-processing
- Barcode scanner radio transmission - USB more
1983
used
Copy milling machine, copy router, hand lever milling machine, hand lever milling machine
Hh7gvlnpo
-For the machining of aluminum and steel profiles
-with 1 vertical and 1 horizontal milling motors
-One engine 0.75 kW 6,000 / 12,000 rpm
-Weight 230 kg more
Catalog No. : 4856
Type: EP 124
Producer: Elumatec
D0plbb9xe
Made in: 2005
Characteristic:
Maximum force (pressing): 7 t
Pressing height: 140 mm
Power supply: 230 V. 1~. 50/60 Hz
Compressed air connection: 7 bar
Air consumption: 35 l
Machine height: 1230 mm
Machine length: 1100 mm
Machine width: 950 mm
Machine weight: 545 kg
Equipment:
Pneumatic drive more
1999
ready for operation (used)
Blade diameter 500 mmMotor power 4 kWDelivery time prompt, subject to prior saleSaw blade diameter: 500 mmSpeeds: 2,800 rpmMotor: 4 kWCutting power 90°: Round 180 mm Square profile 160 mm Rectangular profile 250 x 120 mmCutting power 45°: Round 120 mm Square profile 120 mm Rectangular profile 210 x 100 mm Length of discharge roller conveyor: 450 mmPlastic rollers: b=250 x Ø 50 mmRoller conveyor: Width 4.780 mm Depth 850 mm Height 1,000 mmWidth: 1,100 mmDepth: 1,450 mmHeight: 1,350 mmWeight appro... more
Pivoting range from 0° - 45°, continuously adjustable to the left and to the right
Positive location points at 15°, 30°, and 45°
For cutting range, see cutting diagram
Saw blade diameter 380 mm
Saw blade speed 2,800 rpm
Power supply 230/400 V, 3~, 50 Hz
Power output 3 kW
Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg
Stable, ground, continuous support table with turn table on precision bearings
Wear-resistant and quiet multi-V belt drive
Manual saw feed
Equipped with saw blade as sta... more
1980
used
Copy milling machine, copy router, hand lever milling machine, hand lever milling machine
-for the machining of aluminum and steel profiles
Qkn3tinx8
-with a vertical and a horizontal milling motor
-each engine 0.74 kW 12,000 rpm
-Stop length 2000 mm
-Weight 270 kg more
Catalog No. : 4855
Type: AF 222/02
Producer: Elumatec
Made in: 2005
Characteristic:
Tool diameters: 280 mm
Cutter drilling: 40 mm
Profile height max.: 165 mm
Milling height: 145 mm
Milling depth: 110 mm
Milling length: 400 mm
Milling spindle speed: 2800 1/min
Stroke: 550 mm
Power delivery: 2.5 kW
Compressed air connection: 7 bar
Power delivery: 2 kW
Air consumption: 10-20 cm³
Machine height: 10000 mm
Machine length: 1540 mm
Machine width: 905 mm
Gcboikdd
Machine weight: 248 kg more
excellent (used)
Elumatec double mitre saw DG 142
Mu2lho
3000mm
Saw blade 500 mm
4 KW
Year of construction 03.97 more
2004
repair required (used)
Left head have problem
Bdiymzkah8
Machine is for normal welding and for V - welding more
1998
good (used)
Machine bed lamp 3000 mm
Tenstretch profile width wings 108 mm
Tension range profile width frame 200 mm
Profilhoehe 45-80 mm
max. single seam 2400 mm
Drill spindle speed 1900 UpM.
Compressed air connection 7 bar
Bevyezvdg8
Dimensions L x B x H 3500 x 750 x 1650 mm
Weight about 350 kg more
Double mitre saw in very good condition.
Automatic cutting length adjustment with positioning electronics.
Control = E 255
Bjaqbnv2ay
Saw length = 4.500 mm
Pneumatic mitre adjustment. more
Technical data:
working length: 3100 mm
Xl08w
stand width: 2550 mm
Press force : 130 to
Control: Delem DA 65 W
controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2
Backgauge: 3 D
Crowning
Laser monitoring
hydr. tool clamping top
pneum. tool clamping below
Dimensions (length x width x height): 4050 x 2300 x 2850 mm
Weight: approx. 17 tons
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are ... more
CNC - double mitre saw make ELUMATEC type DG 104
machine # 25647 year of construction 1989
Technical data:
Saw blade diameter 420 mm
Saw blade bore 30 mm
cutting length 4000 mm
Inclination range 45 + 90°
Saw blade speed 2800 rpm.
Cutting range sh. Diagram
Biur97lwg0
small cutting length 335 mm
Power 2 x 4000 W
Dimensions 6050 x 1600 x 1450 mm
Weight approx. 1520 kg
with
- CNC control E 255
used, in good condition more
Max. Saw blade diameter: 280 mm
Pneumatic material clamps
Spraying device
Table rotatable
Ehegxu7
Manual feed
Roller conveyors and longitudinal impact on request more
Pressing of large dimensioned profiles with highest quality requirements
Easy adjustment and operation of the machine, short changeover times to new blade
High pressing force reserve by means of a large-volume bellows cylinder (maintenance-free)
With lowerable, hydro pneumatically controlled abutment
Due to the special design of the abutment head, it is possible to press frames from an inner dimension of 150 mm (clear dimension)
Press-in depth separately adjustable for each tool slide
Adjustabl... more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sell now on Machineseeker! Over 160,000 inquiries per month
Sponsorship of Michael van Gerwen and TV advertising
Photo gallery: The World's 10 biggest excavators
Machineseeker now also sponsering Greuther Fürth
Sample sales contract for used machines in nine languages
