Used End Machining for sale (67,811)

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Itedpfx Afjwwlkiovsk

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Iedpfx Afoxl Up Ujvjtk

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Itedpfx Afoycwtfovsk

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Iodpfjrc Hiijx Afvstk

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Itodpewg E Dhefx Afvjk

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Iedezka Nwspfx Afvetk

Condition: good (used), Year of construction: 1995, pipe diameter (max.): 28 mm, Pipe diameter: 4-28 mm Total power requirement: 1.5 kW - Drive: Hydraulic cylinder and roller chain - Pipe range: 4-28 mm - Bending angle: 190° (without pipe) - Bending radius: 1.5 x D – 2.0 x D - Nominal pressure: 250 bar Ijdpfx Afoztqbpsvotk - Operating pressure: 3005 mm - Delivery rate: 4.5 l/min

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Ijdpfx Afonvfdbovstk

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Itedjlc N Spjpfx Afvok

Year of construction: 1986, condition: ready for operation (used), Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024. Iodpeq A Un Ssfx Afvetk

Condition: used, Year of construction: 1972, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Colour: Green Empty weight: 2.000 kg Price: On request - Year: 1972 - Documentation available: No - CE certificate present: No - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information Itjdpfx Afjzm N Rievek VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Connection power: 4 kVA Control voltage: 220 V Itedezp Raqepfx Afvok Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps Isdpfx Afjhmmfksvetk - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Ijdpfxottc Uae Afvotk

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW Itsdpfx Ajxpqy Dsfvek - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Itjdpfx Aoya Iaqsfvek Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 2016, condition: ready for operation (used), Offered for sale is a Risto fresh milk vending machine. Measuring medium: fresh milk 4°C to 6°C, calibration: milk with 3.5% fat, ambient temperature: -25°C to +55°C, accuracy: 0.5%, flow range: 0.7l/min to 3.5l/min, normal flow rate: 3.4l/min, minimum measured quantity: 200ml. An on-site inspection is possible. Itedpfx Aoztzquofvok

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° Itsdpfxsztvgwj Afvok - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: excellent (used), Year of construction: 2007, Technical data: Ijdpfx Ajztckijfvjtk Working length: 2550 mm Max. bending capacity for small diameters: 12.0 mm Bending capacity from diameter 900 mm: 18 mm Bending allowance: 10 / 12.0 mm Roller diameter: 310 mm Hydraulic folding bearing Drive power: 11 kW Lateral bending support Sheet metal holding device Digital display Dimensions (length x width x height): approx. 4200 x 1500 x 1650 mm Weight: approx. 10 tons Condition: Overall in very good condition, used only sparingly. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2001, Robust hydraulic horizontal bending machine for the precise bending of flat, round, and square steel, as well as various profiles. Suitable for workshops, construction companies, and industrial applications. Specifications: Brand: Stierli-Bieger Type: 300 HE/CE Bending force: 300 kN (30 tons) Itedpezrzlvjfx Afvjk Hydraulically powered Suitable for various bending tools Heavy-duty steel construction In good, working condition Includes tools!

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Iedpfx Ajq Sz Ahefvjtk Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), 3-Roll Round Bending Machine HAEUSLER Type KRMA 2500x10m -Both lower rolls with motorized adjustment for bending and conical bending / hinge bearing for removing the sheet metal -Number of rolls: 3 -Drive: electric -Top roll: can be swung out for removing the workpiece -Operation: separate control panel -Max. sheet metal thickness (steel): approx. 10 mm -Working width 2500mm -Top roll diameter approx. 220mm -Lower roll diameter approx. 220mm -Stroke of the lower rolls approx. 220mm Ijdpfx Aoztaa Usfvotk Dimensions: LxWxH 4.8x1.5x1.6 meters / Weight 6500 kg

Condition: new, functionality: fully functional, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine and the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. Available from stock: HAEUSLER EVO 31031 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 31031 4-roll round bending machine / roll bending machine Isdpfx Aoxwmb Hjfvotk Origin: Germany / Switzerland Year of manufacture: 2024 Condition: NEW, exhibition machine Availability: immediately Performance: Working width 3100 mm Round bending capacity 14 mm Bending capacity 12 mm Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your requirements. Please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2025, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity while simultaneously offering the lowest overall operating costs. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-roll round bending machine / roll bending machine Manufacturer: Haeusler Type: EVO 21015 4-roll round bending machine / roll bending machine Origin: Germany / Switzerland Condition: NEW, showroom machine Availability: 12-14 weeks Performance: Iodexnnf Ispfx Afvetk Working width 2100 mm Round bending capacity 12 mm Pre-bending capacity 9 mm Standard equipment: • Variable oscillation adjustment of the side rolls VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touch control panel including high-end BENDtronic® control • Infinitely adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electro-mechanical locking system for the rotation of the top roll • Automatic pressure adjustment of the bottom roll • Automatic pressure compensation of the bottom roll cylinder, standard cooling system for ambient temperatures up to 35° C • Automated axis optimization • Automatic shutdown of the hydraulics for the roll position • Ultra-compact design to reduce or even eliminate foundation costs • Safety emergency stop cord Optional equipment: • Two-roll drive for the top and bottom rolls • Taper bending device for bending conically shaped workpieces • Extended cooling system for ambient temperatures up to 45 °C • Upper support for easier bending of large diameters • Side support to assist in bending large diameters • Gas pressure accumulator for calibrating already welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick change of top rolls • Interchangeable top rolls with different diameters for bending shots with small diameters • Hardened rolls if black and stainless material is to be bent • Infeed roller table for easy feeding of sheets into the machine • Centering device for the infeed roller table, for automatic centering of the sheets before bending Not the right machine? As a representative of Haeusler, we can put together and offer you your desired machine according to your needs. Further information on request.

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Itsdpfx Aszl Dngefvek Motorized rear roller delivery Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg