Used Ends Processing Machine for sale (71,419)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use. Csdpfjy Uwr Tjx Aknshc

Condition: good (used), functionality: fully functional, Offered is a Kobe K-310 bone saw in good condition. The machine is fully functional and the bearing on the upper wheel has been replaced. New saw blade installed. Saw table dimensions: width 57 cm, depth 78 cm Cedeyh H Rbspfx Aknshc Max. cutting height approx. 35 cm Immediately ready for use, see photos. Further details on request. Payment in cash or in advance. Sale to commercial customers only, no warranty or liability.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Selling a tube conveyor system manufactured by BANSS, complete with infeed and outfeed conveyors, and pneumatic tube conveyor switches. The tube conveyors are equipped with sliding rails. The system has already been professionally dismantled and is ready for transport. It was only used for a short period. It is in very good condition. Plans from BANSS are available. The package also includes empty carrier conveyors and empty carrier tube conveyors. The images show the condition before dismantling. Codsz Dx Nmopfx Aknohc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Codovw I Niopfx Aknohc Electric supply - 400 V / 50 hz / 3 phase.

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Cedpfx Akezvmihsnehc Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: used, Year of construction: 2002, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, Used Dominioni Punto & Pasta P 55 pasta processing machine, manufactured in 2002. Csdpfx Akszzmg Renohc Manufacturer: DOMINIONI PUNTO & PASTA SAS Model: P 55 Serial number: 662 Year of manufacture: 2002 Voltage: 380 V Power: 3 kW Condition: Used The machine is in good working condition and is suitable for professional pasta production. For further information, additional pictures or videos, please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total width: 900 mm, total length: 900 mm, total height: 1,800 mm, energy consumption: 11 kWh, Equipment: CE marking, documentation/manual, We offer this new RPE RPE-110 plastic/Cable/wood etc processing machine, year of construction 2025. The machine is designed for efficient shredding of both soft and hard plastics. It can also process materials such as cardboard, paper and wood, making it a versatile solution for recycling and waste-processing applications. The cutting rotor is fitted with 15 movable knives arranged in three rows, working together with 2 fixed knives mounted on the cutting chamber cover. The cutting chamber can be opened easily, providing convenient access for inspection, cleaning and maintenance. This design also allows the cutting knives and screen to be replaced quickly. The knives can be sharpened and reused several times, helping to reduce operating costs. Technical Specifications Motor: 11 kW, 400 V Capacity: up to 650 kg/h, depending on the type of material Screen perforation: 10 mm Rotor diameter: 260 mm Rotor speed: 560 rpm Cutting system: 15 movable knives + 2 fixed knives Cutting chamber: 500 × 370 mm Cjdpfx Akjz Ikwdjnshc Noise level: 80–95 dB Machine dimensions: 1420 × 1030 × 1410 mm Net weight: 780 kg The cutting chamber measures 500 mm in width and 370 mm in length. A 10 mm screen is supplied as standard, while a 6 mm screen is also available as an optional accessory. The crusher is suitable for processing a wide range of materials, including: Plastic bottles Wooden boards Various plastic products such as soles, strips, profiles, mouldings and film Materials containing small amounts of metal, such as cables and electronic boards Paper, cardboard and paper waste Rubber products With a rotor speed of 560 rpm, the machine is designed to minimize heat generation and prevent excessive melting of the processed material. The powerful 11 kW motor, combined with the heavy-duty flywheel, provides sufficient power for processing demanding and hard plastic materials. The machine can achieve a throughput of up to 650 kg/h, depending on the characteristics and type of material being processed. A practical pull-out waste drawer allows the processed material to be removed quickly and conveniently. The drawer is fitted with four wheels for easier handling. Easy access to the cutting chamber simplifies routine maintenance, inspection and knife replacement. The machine is equipped with a main power switch, emergency stop and clearly arranged control panel. Safety systems are designed in accordance with the applicable EU safety requirements. For optimum performance, the material introduced into the machine should be pre-cut or supplied in a suitable size. The appropriate input fraction depends on the type and characteristics of the material. Safety and CE Certification The crusher is CE certified. Each opening/cover is fitted with a limit switch, preventing the machine from operating while the cutting chamber is open during maintenance or inspection. Drop Chamber Dimensions Width: 500 mm Height: 260 mm The machine is fitted with adjustable support feet, allowing accurate horizontal leveling during installation. Optional Equipment For an additional charge, the machine can be supplied with a waste drawer equipped with an exhaust connection, suitable for connection to an external extraction system. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Chsdpfxoid Iymo Aknsc Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: good (used), functionality: fully functional, For sale is a glycerin tank/cooking pot, 120 liters, V2A stainless steel, double-walled, with 380V connection and lid. Cedpfx Aezcwwqeknehc The tank has been inspected in the workshop and is ready for immediate use. Payment by cash or prepayment. Sale only to commercial businesses. No guarantee, no warranty.

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm Chjdpfx Aeu Scpqeknjc -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, For sale is a Kolbe K330 bone saw, manufactured in 2004, 380V, V2A stainless steel. The saw is fully functional and ready for immediate use. Further details available upon request. Codpfozxquaex Aknohc Payment in cash or by advance payment! Sale only to commercial businesses. No guarantee, no warranty.

Condition: good (used), Direct from closed food factory - was used for frying Scotch Eggs. Dimensions to follow. Machine looks identical to Heat and Control HeatWave fryer so we think it was maybe manufactured under licence from Heat and Control. It can be supplied as a system comprising of a large double oil tank system for fresh and dirty oil and a Berief Drum Pre Filter. There is no top hold down belt on this machine. Chodpfxozmy Aio Aknsc

Condition: used, Year of construction: 2010, Type: RS 2005 V Cjdpfsz Hwbmsx Aknohc Year of manufacture: 2010 400 V / 50 Hz Weight: 1340 kg

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: Klettur 071320, - Manufacturer: Curio - Model: C-3027 - Year: 2013 - Serial no.: Klettur 071320 - Throughput: 16–38 fish/min - Knife speed: 1,000 rpm - Fish size range: approx. 0.7–5.0 kg, depending on species and machine configuration - Power: 3.0 kW - Electrical supply: 3 phase, 380–480 V AC - Current: 7 A - Dimensions: approx. 2.9 × 1.9 × 2.23–2.33 m - Weight: approx. 1,300 kg - Water consumption: approx. 14–30 l/min Suitable for processing whitefish including: - haddock - Atlantic cod - Pacific cod - pollack - tusk - ling - sea wolf Features: - automatic heading process - stainless-steel construction - adjustable fish guides - adjustable settings for different fish sizes and species - variable processing speed - separate discharge of heads and headless fish - automatic SKF lubrication system - operator platform - safety guards with interlocks Csdpfx Aksz H Uf Aonjhc - emergency stop system - electrical and pneumatic controls - wash / cleaning mode Operation manual available. Machine can be inspected by appointment. Price on request.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Bone saw Berkel / Mado MKB 650 16A. 380V. Workshop-tested, defects corrected. Motor brake. Csdpfjy Du T Tsx Aknshc Saw blade new. Year of manufacture: 2002 Inspection and test run possible by prior phone arrangement! Cash or advance payment! Sale only to commercial customers, no warranty, no guarantee.

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) Chedpfx Aksu Dw I Eensc - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: good (used), functionality: fully functional, Offered is a Poly-Clip pneumatic clipper, model SDC 7095, in fully functional condition. Workshop tested. Further details upon request. Payment by cash or in advance. Sale only to traders; no guarantee, no warranty. Cedpfx Akjxq E Tnsnshc

Condition: refurbished (used), Maja ESM 435 – completely overhauled and immediately ready for use The machine has been completely overhauled by us. During this process, all bearings were replaced, electrical components were exchanged, and a new power supply line was installed. The Maja ESM 435 impresses with its compact design and simultaneously large working area. It delivers very good results in terms of scaling, is easy to operate, and runs extremely quietly. Chjdsz Ah Sdepfx Aknoc This machine is particularly interesting for direct marketers, agricultural businesses with their own slaughtering facilities, and smaller butcher shops. Why choose a used machine from Amfotech? We are not a typical used machine dealer, but rather come from a technical service background. Therefore, each machine with us is: * disassembled and thoroughly inspected * technically completely reviewed * equipped with new wear parts * provided with new electrical components if necessary * delivered with a one-year warranty on used machines This way, you don't receive a machine that has simply been cleaned, but a technically overhauled machine that you can rely on in daily use. If you are interested or have any questions about the Maja ESM 435, please feel free to contact us directly.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Peddinghaus FDB 1000/3 – CNC Plate Drilling & Profiling System– Year 2008 Csdpfxoz Hfbbs Aknehc 6 metres x 1 metres Capacity. Maximum workpiece width 1000 mm. Maximum workpiece thickness 50 mm. 3 x drilling spindles. Maximum drilling diameter 40 mm. Oxy‐Fuel. Hypertherm Plasma. Kemper Extraction Unit.

Condition: excellent (used), functionality: fully functional, total length: 150 mm, total width: 110 mm, total height: 120 mm, overall weight: 1,200 kg, input voltage: 400 V, input current: 39 A, Kilia 65 L cutter with outfeed arm in very good condition, with 2-speed bowl and knife axle. The machine is also equipped with reverse for mixing products. Csdpfxjz I Db No Aknehc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. Cedpfezvmy Hox Aknshc NOTES – BUYER TO REMOVE FROM SITE.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,016 h, functionality: fully functional, Vemag model HP 10 E vacuum filler, year of construction 2011, with only 5,041 working hours since new. Continuous vacuum filler for straight filling and portioning. Chjdpfxsz I A Dpo Aknec All-in-one 250 l hopper with counter arm, reinforced scraper, tipping aid, and hopper lock. Integrated vacuum pump with a suction capacity of 16 cbm/h. Graphical display of all settings, functions, and fault information on a TFT colour screen. Nominal output, total: 14 KW; 21 A. VEMAG lifting and tipping device for HPE with 250 l hopper, suitable for standard trolley, 200 l capacity.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 080S0212, total length: 3,500 mm, total width: 800 mm, total height: 2,500 mm, overall weight: 500 kg, input voltage: 1,200 V, track width: 300 mm, type of input current: DC, power: 0.5 kW (0.68 HP), year of last overhaul: 2024, conveyor belt length: 7,000 mm, product height (min.): 1,500 mm, product height (max.): 2,500 mm, conveyor belt width: 300 mm, We are selling a used Marel 4003 S machine. The machine is in a condition appropriate for its age, but it is well-maintained and fully functional. It includes tooling for butterfly-cutting pork loins (for Cordon Bleu) and pork loin steaks. Regular maintenance has been performed by Marel. Cjdpfjzkvcgsx Aknjhc

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: an Edertal meat tenderizer/steak machine, model GM 35, 400V, manufactured in 1998. The machine is in good condition. Codpfx Akozcxhkjnohc Further details upon request! Payment by cash or advance payment. Sale only to business customers; no guarantee, no warranty.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Offered is a Clipper air pressure clipper from Tipper Tie type: TCNi 200BT in a fully functional condition. Workshop tested. Further information on request. Cjdpfx Aovmqyvoknohc Cash payment or advance payment. Sale only to businesses, no guarantee, no warranty.