Used Engel Es 330 65 H for sale (240)

Condition: used, Year of construction: 2011, Great opportunity to buy a 2-plate injection moulding machine ENGEL type DUO 4550/650 from 2011. This machine is in very good condition with 51435 operating hours and equipped with robot arm marked ROBOT VIPER 40 - RC200 CONTROL and a volumetric mixing and dosing device for 3 components (manufacturer MICO MV - 1993). PS: robot cage is not included. Full technical specifications in the attached document. Csdpfxjxfayxe Ah Usri Viewing of the machine is possible upon appointment. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Control: CC200 Clamping force: 6500 kN Opening force: 190 kN Opening stroke: 1650 mm Ejector force: 150kN Ejector stroke: 210 mm Mold height min.: 350 mm Mold height max.: 1000 mm Tie bar diameter: 175 mm Screw diameter: 90 mm Screw stroke: 390 mm Injection pressure: 1910 bar

Condition: good (used), Year of construction: 2007, operating hours: 47,791 h, functionality: fully functional, clamping force: 900 kN, warehouse no.: 503504 manufacturer: ENGEL type: VICTORY 330H-80V-90 combi controller: CC200 year of construction: 2007 operation hours: 47791 h The rotary unit is 6-way R3/8 inch for a maximum of 3 media circuits, medium max. 120 degrees C with 2 water circuits and 1 hydraulic circuit: 2W1H. The 2nd vertical injection unit 80V is equipped with a 22 mm plastification. The injection volume is 38 ccm with 1590 bar injection pressure. clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 243 mm max. open daylight: 743 mm opening stroke: 500 mm round table diameter: 700 mm horizontal injection unit screw diameter: 35 mm swept volume: 154 ccm injection pressure: 1600 bar vertical injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 1590 bar equipment included screen text german screen text english Crjdpfxoxfq Utj Ah Uji core pulling hydraulically 1x machine with rotary index table machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety Schuko-socket 10A mould heating 8x Injection moulding machine for two components measures of machine l x w x h: 4.5m x 1.45m x 2.7m total weight: 9300KG

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Crjdeu Dbkdjpfx Ah Uei Weight: 5600 kg Height 2800 mm

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 90 mm Screw speed 180 r/min Clamping Unit Clamping force 6500 kN Opening stroke 1650 mm Max open daylight 3650 mm Distance between bars 1160 × 960 mm Mould height min 400 mm Mould height max 2000 mm Ejector stroke 210 mm Ejector force for / back 150 kN This Engel DUO 4550/650 was manufactured in 2011. It features a clamping force of 6500 kN and a maximum opening stroke of 1650 mm. The machine supports a mold height ranging from 400 mm to 2000 mm and a platen size of 1510 × 1440 mm. The screw diameter is 90 mm, enhancing its injection capabilities. Consider the opportunity to buy this Engel DUO 4550/650 hydraulic injection moulding machine. Contact us for more information about this machine. Cjdpfsxd Iawjx Ah Ueri Application Types Injection Moulding

Condition: good (used), Year of construction: 2000, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, For sale is an Engel injection moulding machine, type ERC 43/1-EA, including robotic handling. The machine is in good condition and ready for immediate operation. The machine is currently in operation and can be inspected on site. Professional dismantling and loading included. Technical data: Year of manufacture: 2000 Operating hours: 69,000 - Clamping unit: Clamping force: 3,000 kN Platen size: stationary 1,050x980 mm, moving 1,050x900 mm Min. mould installation height: 350 mm Max. platen distance: 1,200 mm 2 core pulls 2 air valves Centre ring diameter: 160 mm - Injection unit: Screw diameter: 70 mm Max. shot volume: 1,155 cm³ Specific injection pressure: 1,779 bar Temperature release up to 500°C - Handling: X: 500 mm Y: 800 mm Z: 1,880 mm C-axis: 0-90° pneumatic 2 suction/gripper circuits Freely programmable I/Os Conveyor belt 4,000 x 600 mm, height-adjustable Predefined program sequences, sprue separation, quality part placement Transport and loading can be organised Europe-wide at extra cost upon request. Crjdpfx Ahjxc D Dcs Uei Prices are exclusive of VAT. Inspection is possible by appointment. Contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase/Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, total height: 2,300 mm, total width: 1,291 mm, total length: 4,083 mm, screw diameter: 2,522 mm, clamping force: 1,300 kN, injection pressure: 2,400 bar, overall weight: 10,600 kg, We once again have some excellent cleanroom machines in our range. Here, we are offering this Engel 2-component cleanroom machine from 2006. The machine comes complete with a GEKU SR 500 ST. Additional accessories include a safety cage and a turntable, all part of the package. The machine has run just 33,107 cycles in automatic mode. The machine comes from a reputable pharmaceutical manufacturer, so both the machine and its handling system were maintained under a very strict maintenance regime and are in first-class condition for their age. Even the paintwork shows hardly any signs of wear. Crjdjxd H A Repfx Ah Uei I am happy to provide you with further data and a quotation upon request. Best regards, Nick Schönfeld Machinery Trading

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Crsdpfxevb Hbfj Ah Usi

Condition: new, Engel D 2965.1/2-G27-B5.15 motor, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Cedpsi D Hu Tofx Ah Ueri

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Clamping force: 45 t Crjdpfx Asvy Anxoh Uei Type: Vertical Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,777 h, General Data Machine weight 6700 kg Codpfxow Efzwo Ah Ujri Clamping Unit Clamping force 80 t This Engel Victory 330H 80V/80 Combi was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of approximately 80 tons and has been operated for about 5,900 hours. Weighing 6.7 tons, consider the opportunity to buy this Engel Victory 330H 80V/80 Combi hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Gear motor, electric motor, electric gear motor, permanent magnet motor -Manufacturer: Engel, permanent magnet motor geared motor with brake -Engine:Type:GNM31650-G2.6-B5.2 -Voltage: 24V / 50W / 3000 rpm Cjdpfx Aoi E Af Ash Ueri -Gear: Type G 2.6 i= 30:1 -Shaft: Ø10 x 23 mm -Protection class: IP54 -Brake: 0.5Nm -Dimensions: 250/125/H95 mm -Weight: 2.4 kg.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, Cedst A Ui Aspfx Ah Ueri We once again have great cleanroom machines in our program. Here we are offering this Engel 2-component cleanroom machine from 2006. The machine is supplied together with a GEKU SR 500 ST. Additional accessories include a protective cage as well as a turntable. The machine has run just 33107 cycles in automatic mode. The machine comes from a renowned pharmaceutical producer, so the machine and its handling were subject to very strict maintenance management and it is in absolutely excellent condition for its age. Even damage to the paintwork is hardly present. I will gladly send you more data and an offer. Best regards Nick Schönfeld Maschinen - Handel . e u

Condition: excellent (used), Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550 Crsdofnqapspfx Ah Uei

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 210275, clamping force: 6,500 kN, Equipment: documentation/manual, Engel Viper40 robot Detailed specification in the attached file. Cjdpfx Ahjw Dcqts Ueri

Condition: good (used), Year of construction: 2001, ENGEL ES 80/25 HL-V Clamping force: 25 ton Plate dimensions: 470x280mm Crjdpfxou Ed Ste Ah Uoi Controll : CC100 Year : 2001 Serial nr. 45277 Screw: 22 mm Injection volume: 38cm3 Shot weight: 34.6g/PS +Picker Engel included Weight: 1800kg

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Crsdpfovdqbhox Ah Uoi Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Year of construction: 2005, condition: used, fuel type: electric, Chassis, electric motor, DC motor, traction motor, drive motor, steering motor Cjdei Aqa Aopfx Ah Usri -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Condition: excellent (used), Year of construction: 2000, operating hours: 60,000 h, functionality: fully functional, clamping force: 9,000 kN, screw diameter: 120 mm, clearance between the columns: 1,120 mm, column diameter: 180 mm, displacement volume: 5,430 cm³, Equipment: documentation/manual, The machine is ready to load. 900 ton clamping force, equipped with take out robot, hopper dryer, hopper loader. First and only owner since produced. The price is loaded on truck. Crjdpfxjickd Hj Ah Uoi

Condition: good (used), Year of construction: 2008, Ref. no.: 18501 Hersteller: ENGEL Type: Speed 380/55 Codpfjxtu Dzsx Ah Uori Year of construction: 2008 Clamping unit Clamping force: 380 ton Distance between tie bars: 780 X 780 mm Mould height min.: 380 mm Mould height max.: 750 mm Platen size (h x v): 1100 x 1100 mm Injection unit Screw diameter: 50 mm Injection volume: 316 cm³ Shot weight: 285 g Measurements and weight Dimensions: 7.75 x 2.3 x 2.5 m Machine weight: 19000 kg Dimensions LxWxH part 1: 2430 m

Condition: used, Year of construction: 2005, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, load hours: 81,700 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Crodpfx Ajrbqtneh Usi Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: good (used), Year of construction: 2004, Tiebarless Engel Victory 750/150 Tech (2004) Crodpfxjwyb I Ne Ah Uji Clamping force: 150 t Screw diameter: 50 mm Shot weight: 353 g Shot volume: 392 cm3 Platten size: 750 x 520 mm Mold height: 300 mm Maximum daylight: 900 mm Injection pressure: 1910 bar \+ Robot ERC Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2020, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, load hours: 4,200 h, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) Cedpfx Asv S H N Reh Ueri delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2005, clamping force: 2,600 kN, Tiebarless Engel Victory 1800/260 Tech (2005) Clamping force: 260 t Screw diameter: 60 mm Shot weight: 687 g Shot volume: 763 cm3 Platten size: 1100 x 700 mm Mold height: 400 mm Maximum daylight: 2300 mm Dimensions: 6600 x 2035 x 2300 mm, weight: 19,4 t \+ Robot ERC Type: Horizontal Credpfjwu H A Uox Ah Uji Drive: Hydraulic

Condition: used, Year of construction: 2020, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, load hours: 1,600 h, screw conveyor diameter: 55 mm, terms of delivery: EXW (ex Works) Crodpfx Aov S H Rboh Uji delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2020, clamping force: 400 kN, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, load hours: 5,400 h, screw conveyor diameter: 55 mm, Freight basis: ex-site Delivery time: by arrangement Cjdpfov S H Rhox Ah Ujri Payment terms: 100% before taking delivery of the machine, net