Used Engrave for sale (311)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Micro 3D L570V, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rotary table diameter: 500 mm, table load: 300 kg, Description General Data Micro 3D L570V is 5-Axis Mold Texture Laser Processing Machine Tool. - Ability to process metal wire drawing, 3D texture, fine texture, leather texture, microstructure, etc. - Laser texture processing accuracy up to 0.01mm Duodpfxevfmbtj Afnen - Simplify your process and achieve infinite repeatability Movement X-Axis Movement 700 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Swivel range A: +110 / -110 ° Rotatable C: 360 ° Workbench: Table diameter 500 mm Processing diameter (5 axis) Max. 600mm Processing height (5 axis) Max.350mm Workpiece weight (5 axis) 300 kg Lasers Nanosecond(Optional) ≥ 50W Femtosecond(Optional) ≥ 20W

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements. Dodpjpyg N Aofx Afnsun

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Dedpfx Afjph U Anenoun Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: used, functionality: fully functional, 1 used: Universal Pantograph Engraving Machine • Model: Fridrich Deckel GK 12 • Application: Fine engraving, copy milling, model making • Working area (workpiece): approx. 200 x 350 mm • Copy template area: approx. 320 x 450 mm • Enlargement/Reduction: 1:1.5 to 1:10 • Year of manufacture: unknown • Spindle motor: approx. 250W • Spindle speed: multiple stages, variable • Condition: used, tested, fully functional Dodpfsxa Ap Esx Afneun

Year of construction: 2025, condition: new, functionality: fully functional, Currently available for immediate delivery - HSC 350MG from NCmind! our smallest and “lightweight” machine. With only 900kg still easy to handle but solid and strong enough for outstanding surface quality. The mineral die cast basement and portal structure are rigid and vibration damping. With traverse paths of 380 mm x 350 mm x 180 mm, it is the universal companion and should not be missing in any workshop! The 40-station HSK-E25 tool changer belongs to standard equipment as well as a water cooled 40.000rpm spindle with up to 6kW power. The HSC 350 is also extremely space efficient! With only 1060mm x 960mm x 2100mm (LxWxH, without operators panel) it fits through almost every door! Duodpfx Ajm Hd Ifsfnon More information in the pdf, by e-mail or by phone - NCmind GmbH

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Duodpfx Afou Hrf Dsnon Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, machine/vehicle number: FI-30-MAX-OF, shaft length: 110 mm, input voltage: 230 V, type of input current: DC, laser power: 30 W, type of cooling: air, working range: 110 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available for immediate delivery! Demonstration unit! Buy now and benefit! Seize this opportunity and secure the 50-watt demonstration unit – used for a maximum of 3 hours, in mint condition! We are happy to assist you for further information or a customized quote. Contact us today to learn more about the benefits of this outstanding product. We offer a 30-watt fiber laser with German user software and an instruction manual. This device is very easy to use and ready to use without any programming knowledge. ✅ Only used for a maximum of 3 hours – top condition! ✅ 3-year warranty and support included! Our services: Personal delivery and installation Setup and training on-site or remotely Continuous support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 30 watts Wavelength: 1064 nm Marking field size: 200 x 200 mm (Options: 50, 70, 110, 150, 250, 300 mm head) Repeatability: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German/English Pilot laser: simple preview Laser class: 4 Operating temperature range: 14-30 °C Focusing: manual Max. component height: approx. 350 mm Connection: 230V Cooling: Air-cooled Weight: approx. 50 kg Operating costs: Low Service life: Over 100,000 operating hours, maintenance-free Features: Grid holes for fixtures Material versatility: Marking a wide variety of materials Included: Head 200x200 mm, other sizes available CE Declaration of Conformity 3-year warranty and support German software Training for machine and programs Invoice Included: USB cable Power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfect for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. This laser is ideal for engraving and annealing metals, as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We perform service ourselves and keep most spare parts in stock right here in Germany to ensure you receive fast and efficient support. Shipping and Installation: With shipping, we will connect the machine to you remotely, set it up, and provide brief instructions. Alternatively, we can deliver it in person, install it, set it up, and provide instruction. The price is negotiated based on your zip code. Djdpfjwchywjx Afnoun Consultation: For detailed advice, visit our website or call us directly. We are happy to answer all your questions.

Condition: new, Year of construction: 2024, Professional CO2 laser with a 600mm x 900mm work table and a tube with a rated power of 80W reaching 90W at peak! The standard equipment includes a CW5000 liquid cooler, a compressor for blowing the lens and material, and a smoke extractor. Model: 6090G Working area: 600x900mm (pass-through table in the Y axis) Rated laser power: 80W Laser power at peak: 90W Tube type/laser type: Glass CO2 laser tube Cooling type: Closed-circuit water cooling - CW5000 cooler Dusdpfx Astvmh Dsfnon Max. engraving speed: 800mm/s Suggested max. cutting speed: 400mm/s Max. Cutting thickness: up to 15mm depending on material and parameters Min. engraving size for letters: 1mm x 1mm Engraving precision: 2500DPI Repeatability: +-0.01mm NEW – Controller and motherboard: Ruida RDC6445G - a module with advanced functions providing advanced control over parameters and the processing process Supported graphic forms: DST, PLT, BMP, DXF, DWG, AI, LAS, etc. Supported interface: WiFi, USB Color separation: Yes Drive system: Hybrid closed-loop stepper motors with high holding torque by LEADSHINE 15mm linear guides by PMI Standard equipment: PURI 80-90W laser tube Fume extraction and piping CW5000 cooler Table knife rigid, stable steel honeycomb table Blowing compressor Power source: 230V, 50-60Hz Working environment: Temperature 0-45oC, Humidity 5-95% (non-condensed) Weight 209.65 kg + accessories ~ 20 kg Dimensions: 142x120x105 cm Machine designed for cutting and engraving in materials such as: Acrylic, leather, rubber (e.g. stamps), wood, wood derivatives, plastics, textiles, clothing, leather, glass (engraving only), marble/stones (engraving only, cardboard, ceramics (engraving only), paper, etc., coated metals (e.g. pens).

Condition: repair required (used), Year of construction: 2019, IMPACT EU + PN12 STD CORD DOT PEEN MARKER - IMPACT P 1 pneumatic marking system IMPACT P (78701) Marking area 120x100 mm; manually adjustable Z-axis (max height 300 mm) robust metal housing with precise guides intuitive operation via color touchscreen powerful, integrated software T08 (including automatic date and time display, counter, duplicate check, mark preview, database connection (CSV, Excel, Access) Marks texts, numbers, logos, 2D codes (DataMatrix, etc#) Character height from 1 mm # 100 mm Interfaces: Ethernet TCP/IP, RS232, USB, FTP, specific inputs/outputs Duodpfx Aswpu Sgjfnjn with the following basic equipment: Standard marking tool PN12-60°, maintaining unit, stainless steel table, touchscreen with integrated software T08, technical manual for start-up on DVD Dimensions: 431 x 270 x 704 mm (L x W x H) - Weight: 26 kg

Condition: repair required (used), Year of construction: 2019, IMPACT EU + PN12 STD CORD DOT PEEN MARKER - IMPACT P 1 pneumatic marking system IMPACT P (78701) Marking area 120x100 mm; manually adjustable Z-axis (max height 300 mm) robust metal housing with precise guides intuitive operation via color touchscreen powerful, integrated software T08 (including automatic date and time display, counter, duplicate check, mark preview, database connection (CSV, Excel, Access) Marks texts, numbers, logos, 2D codes (DataMatrix, etc#) Duedpfswpu Eyox Afnjn Character height from 1 mm # 100 mm Interfaces: Ethernet TCP/IP, RS232, USB, FTP, specific inputs/outputs with the following basic equipment: Standard marking tool PN12-60°, maintaining unit, stainless steel table, touchscreen with integrated software T08, technical manual for start-up on DVD Dimensions: 431 x 270 x 704 mm (L x W x H) - Weight: 26 kg

Condition: repair required (used), Year of construction: 2019, IMPACT EU + PN12 STD CORD DOT PEEN MARKER - IMPACT P 1 pneumatic marking system IMPACT P (78701) Marking area 120x100 mm; Bdobkiswpu Eyjuc Rhec manually adjustable Z-axis (max height 300 mm) robust metal housing with precise guides intuitive operation via color touchscreen powerful, integrated software T08 (including automatic date and time display, counter, duplicate check, mark preview, database connection (CSV, Excel, Access) Marks texts, numbers, logos, 2D codes (DataMatrix, etc#) Character height from 1 mm # 100 mm Interfaces: Ethernet TCP/IP, RS232, USB, FTP, specific inputs/outputs with the following basic equipment: Standard marking tool PN12-60°, maintaining unit, stainless steel table, touchscreen with integrated software T08, Duedpfx Afjwpu R Njnen technical manual for start-up on DVD Dimensions: 431 x 270 x 704 mm (L x W x H) - Weight: 26 kg

Year of construction: 2006, condition: excellent (used), functionality: fully functional, machine/vehicle number: SN 060101012, Best price on request!! Available two equipments: SN 060101012 & SN 060101013. Djdpjwt Tbhefx Afneun

Condition: new, Year of construction: 2025, operating hours: 45 h, functionality: fully functional, machine/vehicle number: DAPPERMARK50W, laser wavelength: 1,064 nm, Marking/engraving system with motorized axes DAPPERMARK DAPPERMARK has a design that X-axis, Y-axis and R-axis can be integrated into the closed system as an option. 3-axis laser marking and 4-axis laser marking with rotary axis applications can be offered in a way that can work all together and controlled by customer-specific software Dodpfjvkv N Djx Afnjun Features: • Safety Class 1 cabin system for work safety • OD +6 laser protection glass provide transparent processing. • Ergonomic computer holder arm. • Easy and quick load and unload with pneumatic front door • Safety switch against the opening door during the laser operation. • Automatic controlled, adjustable Z-axis • Aluminum platform for precise positioning and fixing of the parts. • Adaptable design to integrate fume extractor for harmful gases and smoke occurred during operation. • Robust design, loading capacity up to 200kg The system has 20W,30W, 50W, 60W, 100W and 200W laser power on request. MOPA (colorful marking is available) Applications Marking, engraving and cutting Sectors Jobshop, Molding and Mold Repair, Medical Device Components Aerospace and Electronics, Automotive Parts, Many Others

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,385 mm, travel distance Z-axis: 180 mm, controller model: Xylog, milling spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS X-axis working area: 3,085 mm Y-axis working area: 1,385 mm Z-axis working area: 180 mm Programmable X-axis speed: 50 m/min Programmable Y-axis speed: 45 m/min Programmable Z-axis speed: 22.5 m/min Drilling unit Vertical spindles: 10 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Motor power: 2.2 kW Speed: 4,000 rpm Dsdpfeyf Ekksx Afneun Milling unit Electrospindle: 10 HP Speed: 18,000 rpm Engraving unit Motor power: 2.2 kW Speed: 6,000 rpm Worktable Number of worktables: 6 Vacuum suction cups: 18 Loading supports: 4 Vacuum pump Flow rate: 100 m³/h MACHINE DETAILS Control system: Xylog Installed power: 17/20 kW Compressed air: 6/7 bar Weight: 3,000 kg EQUIPMENT Automatic lubrication

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Dodpfsyhpansx Afnoun Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used automatic wheel rim cleaning machine - BBS Manufacturer: Macchina Utensili Year of manufacture: 2000 Djdpfx Afjw Rrwzjneun

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Djdpeu Nu R Iofx Afnjun Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Dodpfxsx D R Svo Afneun Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Included: FlyMarker XL marker Power supply Cables Exactly what is shown in the photos Dedsyhnu Dspfx Afnjun Shipping or personal pickup available. If you have any questions, please contact me.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, input voltage: 230 V, laser power: 150 W, type of cooling: water, warranty duration: 12 months, Equipment: cabin, Laser cutting machine from our showroom with 150-watt laser power Delivery time: immediately available ----- Switch on and start working ----- ----- Machine with only approx. 10 operating hours ----- ----- Year of manufacture: 2025 ----- ----- Professional-grade machine ----- - incl. Windows 11 PC system / monitor / keyboard / mouse - Pre-installed cutting and engraving software in German - Fully integrated and ready for immediate use - Capable of extremely fine engraving as well as precise cutting of thick wood or acrylic (PMMA) - Machine was only used for demonstration purposes - Highly versatile cutting system - Cuts wood up to 20 mm thick - Cuts acrylic and various other plastics - Cuts fabrics, nonwoven materials, etc. - Cuts rubber sheets - Engravings on wood, concrete, stone, many plastics - Production of stamps - Heavy-duty industrial quality - Travel range: 1300 x 900 mm - Drives with hybrid servos - Linear guides on all axes - reci laser tube with 150 watts peak output Dusdofkgq Aopfx Afnon - incl. honeycomb worktable (removable / extendable) - incl. knife blade table (removable / extendable) - Sheets up to approx. 20 mm thick can be fed through the machine - Continuous processing possible - incl. generously dimensioned laser chiller - incl. high-capacity extraction system - Very easy to operate - Machine control in German - Machine controller in German with large color display - Highly reliable data transfer via USB and network cable - No hassle with occupational safety authorities - All spare and wear parts are in stock Please also see our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 200 cm Height: 125 cm Depth: 150 cm Shipping weight: approx. 600 kg

Condition: good (used), Year of construction: 2020, Epilog Cameo Zing 24 Co2 Laser with UML 340 extraction system Year of acquisition: 2020 (manufactured 2019/2020) Includes rotary engraving attachment and compressor Laser power: 30 watts Max. working area: 610×305 mm Duedpfxjyh Rhko Afnen Max. working height: 191 mm Laser safety class: 2 Resolution: 1,000 dpi Frequency: 10–5,000 pulses/inch Interfaces: 10 Base T-LAN, USB #8480

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92552, working width: 230 mm, planing height: 120 mm, working height: 120 mm, spindle diameter: 40 mm, power of feed motor: 1,500 W, 🪚 2001 Weinig Quattromat 23P Planer Moulder – Industrial Performance in Very Good Condition Now available for sale: a 2001 Weinig Quattromat 23P, one of the industry’s most reliable and compact 4-sided planing and moulding machines, ideal for workshops producing mouldings, profiles, cladding, architraves, and more. This unit is in very good condition, fully operational, and perfect for businesses looking to increase productivity with a trusted European-built planer moulder. ✅ Key Features – Weinig Quattromat 23P Year of Manufacture: 2001 Condition: Very Good – well-maintained, and ready to run Working Width: 13 to 230 mm Working Height: 6 to 120 mm Number of Spindles: 4 Spindle Diameter: 40 mm Spindle Speed: 6,000 rpm Feed Speed: Variable up to 20 m/min Power: Approx. 21 kW combined spindle power Infeed Table: 1,800 mm Pneumatic Pressure System: For consistent timber hold-down Digital Readouts: For quick and accurate spindle positioning Straightening spindle motor: 4 - 7.5 KW (5.5 - 10 HP) Vertical spindles motor: 5.5 - 11 KW (7.5 - 15 HP) Top spindle motor: 4 - 11 KW (5.5 - 15 HP) Feed motor: 1.5 KW (2 HP) Spindle speed: 6,000 rpm Spindle diameter: 40 mm Tool cutting circles of moulding spindles: 125 - 200 mm Adjustment range of spindles (axial): 30 mm Adjustment range of straightening spindle: 5 mm Feed speed: 8 m/min. Feed roller diameter: 140 mm Feed roller width: 2 x 50 mm Width of roller in the outfeed table: 50 mm Adjustment range of straightening table and edge-jointing fence: 10 mm Height of right fences: 60 mm Length of straightening table: 2 m Reference engraver with cutter: Yes Pneumatic pressure for feed rollers: Yes Pneumatic adjustment of infeed roller in front of 1st bottom spindle: Yes Pressure roller from above and left in front of machine infeed: Yes 🛠️ Machine Capabilities 4-sided planing for smooth and dimensionally accurate timber Profile moulding (e.g. tongue & groove, chamfering, rebating, etc.) Batch production of window, door, or cladding components Compact footprint – ideal for smaller workshops or mobile production lines Easy spindle access and minimal setup time 📦 Included with Machine Weinig Quattromat 23P base unit Dust extraction ports Original manuals and operator instructions Fully tested, serviced, and ready for production 🪵 Perfect For: Joinery workshops Timber frame manufacturers Furniture makers Shed and fencing producers Custom millwork and architectural moulding shops 📍 Availability & Delivery The machine is in stock now and available for immediate inspection and dispatch. We offer delivery across Ireland, UK and Europe. 📞 Contact Us Today Boost your timber processing capabilities with this robust and accurate Weinig Quattromat 23P. Weinig Quattromat 23P for sale Used Weinig planer moulder in very good condition 4-side planer moulder woodworking machine Industrial wood planer for moulding production Compact planer moulder for small workshops Weinig planing and profiling machine UK / Ireland / Europe Duedpfx Afownr Enensn Second-hand Weinig machinery for woodworking

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm Dujdeuy H Nqepfx Afnen - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, scan area length: 150 mm, scan area width: 150 mm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Dusdpfswkpx Rex Afnon Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: cabin, Trotec Rayjet 50 – CO₂ Laser System for Engraving & Cutting The Trotec Rayjet 50 is a compact and reliable CO₂ laser ideal for precise engraving and cutting applications. This system is an excellent choice for small businesses, workshops, educational institutions, and professionals seeking to enter laser processing. Currently, 2 units are available from stock. Manufacturer: Trotec Model: Rayjet 50 Year of manufacture: 10/2019 Technical specifications: Laser source: CO₂ laser Laser power: 30 W Working area: 500 × 300 mm Maximum material height: 145 mm Duodpfoyhyu Hsx Afnjn Engraving speed: up to 2.0 m/s Positioning accuracy: 0.01 mm Resolution: up to 1,000 dpi Cooling system: Air-cooled Interface: USB / Ethernet Software: Compatible with standard graphic programs (e.g., CorelDRAW) Dimensions (W × D × H): approx. 870 × 670 × 430 mm Includes extraction system 8401 Atmos Cube All information provided without guarantee. Subject to prior sale.