Used Errex Shelving System for sale (41,131)

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Bodpfx Anjzgci Ejpelp Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) Bljdpfx Anezgckcopjp 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Can be installed outdoors. New units can be installed upon request. The control system is equipped with a speed control function via a frequency converter. Bjdjzukulopfx Anpjlp

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h Blodpfx Aoztvwienpsp

Condition: used, Laserline Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 Blodpfezdqkrjx Anpep The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Bedpfozdrzrox Anpolp Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Blodpfx Aezdtffjnpjp Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Blsdpfx Ajzdywzsnpop Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: new, power: 50 kW (67.98 HP), motor manufacturer: Battery System: LIFePO4, Year of manufacture: 2026 Field of application: Construction Blodpfx Ajy Evlgonpjp Empty weight: 1.600 kg Dimensions of cargo space: 142 x 135 x 170 cm Frequency: 50 Voltage: 400 Please contact Team DPX for more information

Condition: excellent (used), mileage: 25,562 km, power: 353 kW (479.95 HP), first registration: 08/2021, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,090 mm, total width: 2,540 mm, total height: 3,610 mm, Equipment: AdBlue, - PTO Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Front axle 1: Steerable Front axle 2: Steerable Weights Unladen weight: 17,150 kg Payload: 18,850 kg GVW: 36,000 kg Functional Pump: Yes Condition Technical condition: very good Optical condition: very good MERCEDES-BENZ AROCS 3251 8X4 EURO 6 WITH MULTILIFT ULT T 21 S 51 SKIP LOADER + HIAB X-HIPRO 232 E-6 LOADING CRANE HEAVY-DUTY 4-AXLE – 8X4 – EURO 6 – 21 TON SKIP LOADER – HIAB CRANE WITH REMOTE CONTROL For sale is a powerful and versatile Mercedes-Benz Arocs 3251 8x4, equipped with a MULTILIFT 21-ton skip loader and a HIAB X-HIPRO 232 E-6 loading crane. This combination offers an excellent solution for transport, construction, waste disposal, recycling, and crane operations. Thanks to the powerful engine, the robust 8x4 chassis with hub reduction axles, and the extensive hydraulic equipment, this vehicle is ideally suited for demanding tasks. VEHICLE DATA - Make: Mercedes-Benz - Model: Arocs 3251 - Vehicle type: Skip loader with loading crane - Drivetrain: 8x4 - Engine power: 480 hp according to equipment list - Emission standard: EURO 6 - Transmission: Automatic - Engine brake - Wheelbase: 5,150 mm - Axles with hub reduction - Air suspension Bjdeyiuk Ispfx Anpjlp - Mercedes-Benz Arocs cab - Air conditioning - Robust heavy-duty chassis - Suitable for heavy transport and crane operations MULTILIFT ULT T 21 S 51 SKIP LOADER SYSTEM The vehicle is equipped with a powerful MULTILIFT ULT T 21 S 51 skip loader. Technical equipment: - Manufacturer: MULTILIFT - Type: ULT T 21 S 51 - Lifting and tilting system with hook arm - Rated lifting capacity: 21,000 kg - Hydraulic skip loader system - Hydraulic container locking - Hydraulically extendable rear underrun protection - Suitable for picking up, setting down and tilting compatible skip containers - Robust construction for intensive daily use - Ideal for construction containers, debris containers, recycling containers and transport containers The MULTILIFT system enables quick and efficient container changes and ensures high flexibility in a wide range of transport tasks. HIAB X-HIPRO 232 E-6 LOADING CRANE Powerful hydraulic loading crane with 6 hydraulic extensions and remote control. Technical crane data: - Manufacturer: HIAB - Model: X-HIPRO 232 E-6 - Hydraulically extendable loading crane - 6-fold hydraulically extendable - Maximum rated lifting capacity: 5,400 kg - Maximum rated working height: approx. 20 meters - Rated lifting capacity at 20 meters: 870 kg - Remote control for precise crane operation - Additional hydraulic functions - 5th and 6th hydraulic function - Hydraulic oil cooler for the crane - Hydraulic outriggers - 2 hydraulic outrigger legs - Versatile for loading, lifting and assembly work ADVANTAGES OF THE HIAB X-HIPRO 232 E-6 The HIAB X-HIPRO 232 E-6 offers a combination of high lifting power, great reach and precise control. Thanks to...

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Blodpfx Ajyiy Hbsnpjp Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Bljdpfx Anjhkzu Aspep Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, Chip extraction unit ASA 2803 Mobile, with a 180° rotatable extraction unit For milling, planing, and sawing chips (not suitable for dust) The 180° rotatable extraction unit enables chip extraction from below or above Robust metal fan impeller Standard equipment includes a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-woven Dimensions and weights Bodjhk S Sdjpfx Anpjlp Chip collection volume: 2 x 120 l Outer diameter of extraction nozzle, inlet: 203 mm Outer diameter of extraction nozzle, outlet: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical data Idle speed: 2950 min¯¹ Power consumption: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 1.92 m² Noise emission Sound pressure level max.: 87.5 dB(A) Volume flow Nominal volume flow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), mileage: 148,777 km, power: 552 kW (750.51 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,570 mm, fuel: diesel, fuel tank capacity: 1,000 l, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, navigation system, onboard computer, parking heater, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Aluminum Fuel Tank - High Beam Lights - Low Noise - Speed Limiter - Cab - Refrigerator - Leather Interior - Leather Upholstery - Air Suspension - Air-Suspended Seats - Media System - Metallic Paint Bljdey Thr Iopfx Anpop - Rotating Beacon - Reversing Camera - Sleeper Cab - Sun Visor - Lane Keeping Assist - Auxiliary Heater - Toolbox - Power Take-Off (PTO) - Central Lubrication System - Tow Hitch = Additional Information = General Information Year of Construction: 2024 License Plate: 19-BXV-1 Technical Information Number of Cylinders: 6 Engine Displacement: 16,123 cc Transmission: I SHIFT, Automatic Front Axle: Steerable Rear Axle 1: Dual Tires; Lift Axle Weights Unladen Weight: 13,669 kg Payload: 18,331 kg GVW: 32,000 kg Functional Body Brand: VDL S 26 Pump: Yes Interior Upholstery: Leather Condition Technical Condition: very good Optical Condition: very good VOLVO FH 16 750 6X2 VDL CONTAINER TIPPER EURO 6 L PACKAGE 750 HP DRIVE 6X2 WHEELBASE 520 CM AIR SUSPENSION DIFFERENTIAL LOCK I-SHIFT AUTOMATIC VOLVO ENGINE BRAKE PLUS SLEEPER CAB WITH AIR CONDITIONING DRIVE ALERT CONTROL (COLLISION WARNING) LANE KEEPING ASSIST SIDE VIEW CAMERA AUXILIARY HEATER 27MC, MEDIA, TOOLBOX TRAILER COUPLING VDL S-26-6600 HOOKLIFT SYSTEM HYDRAULIC CONTAINER LOCKING HOOK HEIGHT 145 CM

Condition: excellent (used), mileage: 695,160 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, number of seats: 2, Structure Construction year: 2008 = More information = General information Year of construction: 2008 Cab: single Registration number: 2EBR229 Technical information Number of cylinders: 6 Front axle: Steering Rear axle: Double wheels Weights Empty weight: 14.880 kg Carrying capacity: 4.120 kg GVW: 19.000 kg Functional Water tank: Yes Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Bledpfxey Rfu Uo Anpjp Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Bledpfx Ajzd Tllenpjp Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Bodpfx Ajzdnnuonpslp Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Condition: used Scope of delivery: (See picture) Bsdpfx Aezdn T Rsnpolp (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2025, Hot wire cutting system Manufacturer: MANZ Blodpoznli Defx Anpep PLC control, touch screen display, Siemens

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 2,000 kg, total length: 4,500 mm, total height: 5,180 mm, shelf height: 5,180 mm, load capacity: 6,000 kg, overall weight: 16,250 kg, frame height: 5,180 mm, Ohra racking system with 11 units. Includes push-through safety stops and galvanized support grids. See pictures. Bjdpfjya Dg Hox Anpslp

Condition: used, Year of construction: 2008, Year of manufacture: 2008 12 motors of 15kW Bljdpfjwiwpzsx Anpsp Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, operating hours: 100 h, KNAPP’s OSR Shuttle™ Evo automated shuttle system, designed for high-performance storage, order picking, and logistics flow management. This modular system enables flexible, scalable, and energy-efficient operation of modern warehouses. Key technical features: Type: AS/RS (Automated Storage and Retrieval System) Capacity: up to 50 kg per bin Installation height: up to 30 m Throughput: up to 1,000 dual cycles/hour Operation: 1D or 2D, depending on the configuration Components included (depending on configuration): OSR Shuttle™ shuttles High-density shelving High-speed vertical lifts Order picking stations Connection accessories (conveyors, power supply, cabling, etc.) Environment: suitable for refrigerated areas (down to -28 °C) Applications: e-commerce, distribution, industry, pharmaceuticals, electronics, etc. Compatible with “goods-to-person” workstations and automated conveyor systems Quantity: 20 Bljdpfx Ansxtawtepjp Price: €4,590.00 (excl. VAT) per shuttle

Condition: good (used), Year of construction: 1999, functionality: fully functional, total width: 1,060 mm, shelf height: 2,250 mm, support length: 500 mm, -KOM 3156- Bljdpfxsxqc Txo Anpjp Offered here is an SSI Schäfer plug-in shelf rack in good condition. The maximum bay load is 1,200 kg, and the maximum shelf load is 200 kg. In total, we have 23 identical racks available. The rack consists of: - 2 x Schäfer storage bins LW 512 - 2 x Schäfer storage bins LW 530 - 3 x standard shelves Rack dimensions: Height: approx. 2,250 mm Depth: approx. 500 mm Width: approx. 1,060 mm Height of storage compartments (from bottom to top): 1 x lower standard shelf: approx. 200 mm high 2 x large Schäfer storage bins: approx. 350 mm high 1 x middle standard shelf: approx. 200 mm high 2 x small Schäfer storage bins: approx. 200 mm high 1 x upper standard shelf: approx. 300 mm high The height of the Schäfer storage bins can be individually adjusted using the mounting brackets (see last photos).

Condition: good (used), mileage: 252,835 km, power: 74 kW (100.61 HP), first registration: 04/2018, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, wheelbase: 3,060 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 2, total length: 4,910 mm, total width: 1,800 mm, total height: 1,840 mm, loading space length: 1,960 mm, loading space width: 1,430 mm, loading space height: 1,190 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Configuration: 4x2, Payload: 697 kg, Curb weight: 1463 kg, Gross vehicle weight: 2160 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 1300 kg, Tow hitch, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 4, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Silver, Metallic, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 74 kW (99 hp), Number of cylinders: 4, Displacement: 1499 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat covering: Fabric, Seat adjustment: Manual, Air conditioning, Navigation, Parking distance control, Tow bar, Spare wheel, Tire type: Summer tires = Additional Information = General information Number of doors: 1 License plate: V-914-NP Axle configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,463 kg Payload: 697 kg Bljdpfxsz Rv Ege Anpep GVW: 2,160 kg Functional Loading area height: 57 cm Maintenance APK (Periodic Vehicle Inspection): Valid until 04.2027 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 1

Condition: used, mileage: 160,000 km, power: 302 kW (410.61 HP), first registration: 10/2009, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel, Palift T18 18-ton system – HMF 1460 – High-level and ground-level control – 2 extension booms – Rotator and grapple function – External planetary axles – Rockinger coupling – 2 outriggers – permissible total weight 26,000 kg – tare weight 14,100 kg – wheelbase 3,875 mm – = Further information = Bjdpfxjz Rzw Uj Anpolp Suspension: Leaf spring suspension Front axle: Steered Rear axle 1: Reduction: External planetary axles Rear axle 2: Reduction: External planetary axles Unladen weight: 14,100 kg Payload: 11,900 kg GVWR: 26,000 kg Reference number: 32 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.