Used Ess Ecomag 404 for sale (11,211)

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2, First registration: 06/30/2026. New tractor with dealer pre-delivery registration. Standard equipment / technical data: Engine, Rated power (ISO) 82 / 110 kW/hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - single-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-sensing reversing shuttle, 4-stage load shifting, Permanently cooled wet disc clutches with independent lubrication system, Dual-speed PTO: 540 / 540E / 1000, PTO switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / Lift: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single/double acting, MR + 1x single/double acting, NL, SST, Quick coupler Cat. 3 with balls and catch baskets Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lift struts on both sides and 2 lateral stabilizers, EHR with external control on both fenders. Electrical equipment: Thermo start, 120 A alternator, Battery disconnect switch (electrical), Power supply (12 Volt) for external devices with plug. Axles / Additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Height-adjustable automatic trailer hitch, Fenders, external width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Driver's seat: Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver's seat with armrests, swivel adapter, safety belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Dedpfeyvmq Isx Apwekr Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplings, 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Co-driver/passenger seat with belt, Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter & armrests, Rear window wiper/washer system, Battery.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Dksdpewqrvlofx Apwer Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, mileage: 34,260 km, power: 59 kW (80.22 HP), first registration: 07/1964, fuel type: gasoline, color: green, driver cabin: other, gearing type: mechanical, number of seats: 2, Year of construction: 1964, Equipment: all wheel drive, Vehicle location: Bovenden, Color: green Fabric: gray soft top: green U82 (main series) Start and drive with a brand new engine that has now covered 350 km. The engine must therefore be run in further. The renewed parts include: New engine block, batteries, ignition coil, spark plugs, spark plug wires, distributor cap, hood, windshield wipers, headlight grille, fuses, horn, mirrors, seats, snorkel, engine washer, throttle cable, lights, switch plate, leather protection gearshift, 2x front tires, 5 inner tires, brake shoes front and rear, brake cylinders front and rear, complete exhaust, gearbox rubbers renewed, handbrake rubbers, fuel tank, blind spot blades, special stainless steel lock for battery box, oil, coolant, brake fluid, grease, oil filter, fuel filter and several new loose parts are still available as spare parts. Primed twice and painted twice. The front floor still needs to be painted, then it's just a matter of sticking with it. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dkedpfx Apjvhi Twswer - .

Condition: used, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,260 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 1,320 mm, Year of construction: 2011, Tyre size: 385/55R22,5 Suspension: air suspension Rear axle 1: Steering Drive: Wheel Dodpfxouc Ebze Apwskr Empty weight: 11.340 kg Carrying capacity: 23.660 kg GVW: 35.000 kg

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Dodpfx Asiu U Txspwekr Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Year of construction: 2025, condition: new, Screening deck system consisting of 1 deck for screening of waste wood grain size 0-25 mm capacity approx. 80 m³/h (depending on material) material separation in 2 fractions 0-25 mm and oversize Screening deck with enclosure for suction system upstream acceleration belt with screen deck screwed to one unit +++ Technical data +++ Screen deck 1: Screen deck area length = 4,540 mm; width = 1,215 mm Dodpod Rbngsfx Apwjkr Outer dimensions : length = 4.820 mm width = 1.850 mm Screening area 5,1 m², number of shafts 34 pcs. drive 2 x 5,5 kW gear motors Screen body polyurethane (star screen) D 166 / 12 fingers Screen shafts as plug-in system (adaptation to other grain sizes easily and cost-efficiently possible) Lubrication of bearings placed outside, optional central lubrication possible at extra cost Enclosure 2 mm plates screwed together +++ Acceleration belt +++ drive 1 x 2,2 kW gear motors belt width 1.200 mm belt length approx.3.000 mm Outer dimensions : length = 3.500 mm width = 1.400 mm Delivery time approx. 25 weeks

Year of construction: 2025, condition: new, machine/vehicle number: ESS T2 - *M 0--.10*, Mobile starscreen on trolley Suitable for material: soil, compost, topsoil, wood chips, building rubble, bark mulch Weight: 3500 kg Grain size: 12 to 40 mm (according to material requirements) Power supply: 3 phases, 400V, current 32A, frequency 50Hz, total power 11,25kW throughput: 40 to 60 m³/h depending on material and grain size Dkodpfx Asd Nytuspwer Delivery time after order approx. 16 weeks

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: ESS B2 - *M 0--.10*, Mobile starscreen on trolley Suitable for material: soil, compost, topsoil, wood chips, building rubble, bark mulch Weight: 2700 kg Grain size: 12 to 40 mm (according to material requirements) Power supply: 3 phases, 400V, current 32A, frequency 50Hz, total power 11,25kW throughput: 40 to 60 m³/h depending on material and grain size Dkjdpfx Aoirnrpspwjr Delivery time after order approx. 14 weeks

Year of construction: 2026, condition: new, machine/vehicle number: Neumaschine auf Bestellung, Description: - Screening system consisting of 1 deck for separating minerals from pre-crushed material. Maximum input particle size: 0-100 mm. - Screening cut size: 0-30 mm. - Capacity: approx. 60 m³/h (material-dependent). - Material separation into 2 fractions: 0-30 mm and oversize. - To be mounted on customer-supplied impact plates or a subframe. Technical Data:  Screening deck: Length = 3,120 mm; Width = 1,400 mm o External dimensions: Length = 3,300 mm; Width = 2,050 mm o Screening area: 4.6 m², Number of shafts: 24 pcs. o Drive: 2 x 4.0 kW geared motors o Screening body: Polyurethane (star screen) D 166 / 12 fingers o Screening shafts as a plug-in system (adaptation to other particle sizes is easy and cost-effective) o Bearing lubrication positioned externally; optional central lubrication system available for an extra charge. Dedpfed Rbmkjx Apwekr  Color: black RAL 9017 / green RAL 6018 or according to customer specifications (for an extra charge). Delivery time: approx. 20 weeks.

Year of construction: 2025, condition: new, machine/vehicle number: Neu, Description:  Screening system consisting of 1 screen deck for separating green waste / biomass with a particle size of 0-80 mm.  Capacity up to 150 m³/h (material-dependent).  Material separation into 2 fractions: 0-80 mm and oversize.  Screen deck with enclosure and extraction for film particles.  Extraction point is adjustable.  Suction and conveying fan positioned beside the unit in a frame, with a hose diameter of 300/350 mm. Technical data:  Screen deck 1: Screen deck area, length = 6,360 mm; width = 1,215 mm o External dimensions: length = 6,690 mm; width = 1,850 mm o Screen area 5.1 m², number of shafts 24 o Drive: 2 x 7.5 kW geared motors o Screen body: polyurethane (star screen) D 340/9 fingers o Screen shafts as a plug-in system (adaptation to other particle sizes is easy and cost-effective) o Bearing lubrication via central lubrication system 24V (without control; must be integrated into the system control).  Suction and conveying fan o Drive: 1 x 15 kW (optional control via frequency converter; not recommended as part of the offer). o Optional: with knife attachment. Dsdpfx Asd Rbnqepwjkr Delivery time approx. 18 to 20 weeks.

Year of construction: 2026, condition: new, machine/vehicle number: neu, Description:  Screening machine on hook lift with chassis for on-site transport  Screening into 2 fractions: 0-12 mm and oversize greater than 12 mm  Throughput capacity greater than 80 m³/h (material-dependent) Film separation via separation chamber and extraction fan Conveyor fan positioned beside the machine  Discharge belt, hydraulically foldable  Central control cabinet with networking option to existing machines (emergency stop)  Technical data:  Transport width: 2,500 mm  Transport height: 2,700 mm  Transport length: 7,800 mm  Screen deck: Area length = 4,240 mm; width = 1,200 mm o Screen area 5.4 m², number of shafts 32 o Drive: 2 x 7.5 kW geared motors, speed-controlled (frequency inverter) o Screen body: Polyurethane (star screen) o Screen shafts as plug-in system (adaptation to other grain sizes is easy and cost-effective) o Central lubrication of the screen deck bearings (64 lubrication points)  Hopper: Capacity approximately 3 m³ Dedpfx Aed Rbyhepwekr o Drive: 2.2 kW geared motors, speed-controlled (frequency inverter)  The A-belt and oversize belt are assembled on-site using a plug-in system o Total power: 26.5 kW o Hydraulics: via 24 V battery with integrated charger  Color: black RAL 9017 / green RAL 6018 or according to customer specifications Description:  Conveyor fan for extracting and discharging floating plastic films on the screen deck (maximum part size L = 1,000 mm)  Suction hose D 300 mm  Pressure hose D 350 mm  Fan in frame positioned beside the screening machine with attachment points and forklift tines  Control cabinet with ABB 15 kW frequency inverter, control unit located externally (control cabinet door)  Networking option to existing machines (emergency stop) Delivery time approximately 25 weeks.

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm  Capacity approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) Dkodeg I Uqispfx Apwjr o Bearing lubrication located externally, optional central lubrication system available at an extra cost Delivery time approx. 16 to 18 weeks.

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating green cuttings/biomass and old wood with a grain size of 0-100 mm.  Capacity up to 100 m³/h (material-dependent).  Material separation into 2 fractions: 0-100 mm and oversized material.  Screen deck with tarpaulin cover.  Lubrication of the screen deck bearings is routed externally. Technical data:  Screen deck area: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 5.1 m², number of shafts 20 pieces o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen), D 340/9 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes is possible) o Lubrication of the bearings is routed externally; optional central lubrication system available at an extra cost. Dedpofygd Ssfx Apwokr Delivery time approx. 18 to 20 weeks.

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips. Dodsg I Uqfjpfx Apwekr  Input material: 0-200 mm  Capacity: approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversized fraction  To be mounted on customer-owned impact plates or a substructure Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes) o Bearing lubrication positioned externally; optional central lubrication available at an extra cost

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Dkjdpfx Aowvbqijpwjr Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: used, Year of construction: 2023, operating hours: 2,216 h, total length: 5,750 mm, total width: 2,110 mm, total height: 3,640 mm, Weight: 27.760 kg Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 7376230761 - Operating hours: 2216 - Drive system: CNC - Control system brand: Durma - Control system type: DT-15 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 400 - Max. working width [mm]: 4050 - Column gap [mm]: 3400 - Throat depth [mm]: 630 - Max. stroke [mm]: 365 - Crowning system: CNC-controlled - Tools included: Yes - Transport dimensions: 5750mm x 2110mm x 3640mm (l x w x h) Dedpozcnpdjfx Apwekr - Transport weight [kg]: 27760kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Dkedpfx Ajd Rlk Hspwjr Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Condition: new, For sale: high-quality stainless steel compensators / flexible hoses from a reputable manufacturer. Components designed for industrial installations – ideal for compensating vibrations, thermal expansions, and misalignments in piping systems. ⚙️ Technical data Model: BOA-MS Material: Stainless steel 1.4404 (AISI 316L) Nominal diameter: DN65 Operating pressure: PN16 Type: compensating hose / steel compensator Length: approx. 1000 mm Connections: flanged Construction: steel braided Year of manufacture: 2021-2023 Condition: New / unused (may show signs of storage) ✅ Applications industrial installations Dkodpfxjyzihaj Apwsr water and heating systems steam installations chemical and food industries vibration reduction for pumps and equipment

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating - gas - water - process/technological Dodpfxoyzimvs Apwskr ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 117591299, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Dedpfx Apoznmdvewjkr TECHNICAL DETAILS MACHINE DETAILS Weight: 17,600 kg Length without attachments: 2.55 m Length with attachments: 3.70 m Width without attachments: 0.9 m Width with attachments: 1.25 m Height without attachments: 4.15 m Height with attachments: 4.30 m Mains voltage: 415 V AC Frequency: 50 Hz Hydraulic oil: AGIP OSO 46 Thermal oil: AGIP ALARIA 3 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dkodpfxjznmb Is Apwer Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 660 t, overall weight: 28,000 kg, heating capacity: 31 kW (42.15 HP), plate length: 1,900 mm, plate width: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 660 t Press plate dimensions: 1,900 × 1,600 mm Heating capacity: 31 kW MACHINE DETAILS Electrical data Operating voltage: 400 V Control voltage: 220 V Frequency: 50 Hz Dkedpfx Apeznmbzowsr Phases: 3 + N + PE Rated current: 160 A Connected power: 108 kW Machine weight: approx. 28,000 kg Design: Lower platen heating press / molding press EQUIPMENT Heated press plates Documentation

Condition: used, Year of construction: 2007, Auction of a drilling line with the following components: PRIESS EIN-Igel (Vertical storage system) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS Conveyor system TECHNICAL DETAILS Vertical storage system Max. panel width: 500 mm Max. panel length: 1,500 mm CNC drilling machine Machining process: Drilling Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Max. panel thickness: 26 mm Number of drilling units: 4 Total number of drilling spindles: 88 Drilling unit 1 Position: Top Vertical drilling spindles: 23 Drilling unit 2 Position: Top Vertical drilling spindles: 23 Drilling unit 3 Position: Bottom Vertical drilling spindles: 12 Drilling unit 4 Position: Bottom Vertical drilling spindles: 20 CNC drilling and dowel insertion machine (Priess BAT-DTW-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of working areas: 1 Total number of drilling spindles: 49 Number of drilling units: 4 Drilling unit 1 Position: Top Horizontal drilling spindles in X-direction: 8 Drilling unit 2 Position: Top Horizontal drilling spindles in X-direction: 17 Drilling unit 3 Position: Top Vertical drilling spindles: 12 Drilling unit 4 Position: Top Vertical drilling spindles: 12 Insertion unit Number of insertion units: 1 Number of injectors: 10 Number of hoppers: 1 Insertion material: Wooden dowels CNC drilling and insertion machine (BMA DLS-CNC) Machining process: Drilling and insertion Working area X-axis: 2,500 mm Working area Y-axis: 800 mm Number of controlled axes: 3 Main electric spindle power: 4.4 kW Number of milling spindles: 3 Number of insertion units: 2 Milling spindle 1 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 2 Position: Top Number of controlled axes: 3 Motor power: 4 kW Milling spindle 3 Position: Top Number of controlled axes: 3 Motor power: 4 kW Grooving unit Position: Top Insertion unit 1 Dksdszmtpvepfx Apwsr Number of injectors: 1 Number of hoppers: 1 Insertion unit 2 Number of injectors: 1 Number of hoppers: 1 Brushing machine Max. working width: 800 mm Max. machining width: 800 mm Max. machining length: 2,500 mm Brush diameter: 160 mm Roller conveyor Max. panel width: 800 mm Max. panel length: 2,500 mm Panel feed: Motorized belt

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Dsdpszmtlkjfx Apwskr Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Dkjdpfxjw Idc De Apwer Operating Units: 9 nr