Used Est Ticino for sale (2,914)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Gjdju Tha Iepfx Abrsin Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Gedsu Thh Espfx Abrein Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers Gijdpoqup Anjfx Abren TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slotting Centre Machine No. M64127 Year of manufacture: 09/2019 The commutator slotting centre has four machining steps. The following components are approached in the steps: Contact slitting saw Insulating grooving saw Deburrer Brush The Stäubli TS 80 robot with SP1 control has two grippers that pass the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer  Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC  More pictures via this link. Further technical data will follow shortly.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. Gijdpfx Ajg H Inzsbron High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, machine/vehicle number: 41, 1 color Offset Press Serial-No. 41A442 Gedpfx Abetzc E Ajrsin Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1991, Folieneinschlagmaschine für pharmasichere Einzel- und Sammelgebinde - Film Wrapping Machine for pharma single and multipacks Pester PEWO-foldYear 1991 - Serial-No. N-261 Maschinen Abmessungen: 2950 x 1450 x 2100 mm [L x B x H] Ausstattung: K-Stapler Min. Formatbereich: Faltschachtel 30 x 15 x 60 mm [a x b x h] Gebinde 60 x 30 x 60 mm [L x B x H] Gedpsh Axgnsfx Abroin Max. Formatbereich: Faltschachtel 150 x 80 x 250 mm [a x b x h] Gebinde 250 x 250 x 140 mm [L x B x H] Leistung: bis zu 60 Gebinde/ Min. Steuerung: Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Spiralbindemaschine - Spiral binding machine Gestetner 220 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Gijdpeh Ax Nwofx Abron On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Giodpfx Ajvgbqfobren Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Machine in good condition .

Condition: good (used), Year of construction: 1965, Turret lathe HESTIKA Type: HR32 built approx. 1965 Spindle capacity max: 32 mm with tool turret, collet chuck device, Spindle speed :200-3200 rpm with coolant device, machine documentation . Gedpfx Abjvgbphsrein Good condition Ready for immediate use .

Condition: used, Year of construction: 1988, Welding fume extractor Fabr.ESTA Type:SRF - 2000 Year 1988 Gsdpfxou Hlppo Abrein Ready for use.

Condition: excellent (used), Shrinker / Packing machine PEWO - pack 450 SN System for picking and shrink-wrapping products Film width max 450 mm Clearance height max 250 mm At the moment the machine is designed for 3 cans, which are commissioned and then shrink-wrapped in foil. Very good ready for use condition, directly from the production! Giodpfx Abofkz Dgerjn

Condition: used, diameter of piston 0 0 stroke length max. 0 0 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Gsdpfed Ig Uvjx Abrjin Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Detailed pictures can be supplied.

Condition: used, Year of construction: 2018, Overview  This semi automatic sixpack packaging machine was manufactured in 2018 by the german manufacturer WestRock. It is a multipacking machine, ideal for small operations.  The machine is in a good condition and immediately available. Technical data  Capable of running baskets and wraps on same machine Simple, mechanical drive system    Can be configured for bottles (glass, aluminum or PET), cans, bricks or cups (loose or attached) Single height between 40mm & 250mm Single diameter between 40mm & 112mm package format: 2x2 through 2x6 capacity: 10 packs/minute  Power: Compatible with standard 110V or 220V power supply Single operator changeover in less than 5 minutes adjusted for formats: NRW 0,5L; Stubbi 0,33L; LN 0,33L; expandable by format parts  Gsdpox Nfuxjfx Abrsin

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  4500 rpm with self cleaning drum Accessories  Spare Parts Tools Gsdov N Hcxopfx Abrjin

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request Giedpfx Abek Abl Nsrsn 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Gedpetr Ud Ssfx Abroin Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Year of construction: 2022, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS780 / incl. Power-Tiltator / incl. OQ 70/55 adapter plate / only 93 hours / year of manufacture: 2022 / immediately available / top condition! Price: €47,890.00 net / €56,989.10 gross Equipment: - Power-Tiltator, infinitely rotatable - Cutting diameter: 750 mm - Gripper opening width: 1,600 mm - Own weight (basic - fully equipped): 2,000 - 2,200 kg - Recommended oil flow: 120 - 170 l/min - Recommended oil flow (auxiliary function): 50 - 70 l/min - Recommended operating pressure: 280 bar - Carrier machine operating weight: 20 - 28 t - Tilt function for cutting operation: automatic - Saw box: actively sprung - Saw chain lubrication: grease Features: - incl. Power-Tiltator - incl. OQ 70/55 adapter plate We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Westtech products available from stock! Mr. Herden (phone) will be happy to assist you. We will also be happy to provide you with a financing offer on request. We are an official sales and service partner of Westtech. We are an official sales and service partner of Gierking GMT. We are an official sales and service partner of OilQuick. We are an official sales and service partner of Weber MT. We are an official sales and service partner of Holp. We are an official sales and service partner of DMS. We are an official sales and service partner of Seppi M. We are an official sales and service partner of Magni telehandlers. We are an official sales and service partner of JCB construction machinery. We are an official sales and service partner of Mercedes-Benz. We are an official sales and service partner of Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Subject to errors and prior sale! Internal ID: 122025 Gjdpeyi R Dqofx Abrsin = More information = New: No Part suitable for: application in forestry Contact Tobias Ebert for further information.

Year of construction: 2025, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker CS610 compact / including Power-Tiltator / including MS10 adapter plate / Year of manufacture: 2025 / DEMO unit / immediately available / excellent condition! Price: €39,990.00 net / €47,588.00 gross - Cutting diameter: 610 mm - Gripper opening width: 1,280 mm - Own weight (basic - fully equipped): 830 - 1,060 kg - Recommended oil flow: 65 - 110 l/min - Recommended auxiliary function oil flow: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Carrier vehicle operating weight: 15 - 20 t - Saw box: active suspension - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. MS10 adapter plate We stock a wide range of additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.), all available for immediate delivery. We maintain a large inventory of various Westtech products available for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. Upon request, we are also happy to provide a financing offer. We are an official distribution and service partner for the following brands: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Giedpfsyi R Dkex Abrjn Internal no.: 422068 = More information = New: No Part suitable for: forestry applications Contact Tobias Ebert for further information.

Year of construction: 2025, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CL190 Felling Grapple / in stock & immediately available / Year of manufacture: 2025 / DEMO unit / very good condition Price: €3,895.00 net / €4,635.00 gross - Cutting diameter softwood (mm): 250 - Cutting diameter hardwood (mm): 190 - Grapple opening = shear opening (mm): 685 - Own weight (basic – fully equipped) (kg): 210 - 400 - Recommended flow rate main circuit (l/min): 40 - 80 - Recommended operating pressure main circuit (bar): 250 - Recommended flow rate auxiliary circuit (l/min): 20 - 30 - Recommended operating pressure auxiliary circuit (bar): 200 - Carrier machine operating weight (t): 2.5 - 7.5 We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse carries a wide selection of various Westtech products, all available for immediate delivery! Gisdpfjyi R Ddox Abren Mr. Herden (phone) will be happy to assist you. On request, we will gladly provide you with a financing offer. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Subject to errors and prior sale. Internal No: 252332 = More information = New: No Part suitable for: Use in forestry Please contact Tobias Ebert for further information.

Year of construction: 2024, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS545 compact grapple saw / incl. endless rotating tiltator / Year of manufacture: 2024 / in stock & immediately available / excellent condition, almost like new Price: €27,790.00 net / €33,070.10 gross Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (basic – fully equipped) (kg): 610 – 780 Recommended main circuit oil flow (l/min): 50 – 100 Recommended auxiliary circuit oil flow (l/min): 35 – 50 Recommended operating pressure (bar): 200 – 250 Carrier vehicle operating weight (t): 8 – 15 Equipment: - Incl. endless rotating tiltator - Incl. automatic tiltator lubrication system (grease lubrication) We have many adapter plates in stock and immediately available (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...). We stock a very large selection of various Westtech products that are immediately available from our warehouse! Mr. Herden (phone) will be happy to assist you. We also offer financing solutions upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We deliver the complete range of Westtech Woodcracker products for you! Errors and prior sale excepted! Internal no.: 624005 = More information = New: No Part suitable for: Forestry application Please contact Tobias Ebert for further information. Gedpfx Aboyi R A Hjrein

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS545 Compact Grapple Saw / incl. infinitely rotating tiltator / NEW unit / in stock & immediately available Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Operating weight (basic – full equipment) (kg): 610 – 780 Recommended oil flow, main circuit (l/min): 50 – 100 Recommended oil flow, auxiliary circuit (l/min): 35 – 50 Recommended operating pressure (bar): 200 – 250 Carrier vehicle operating weight (t): 8 – 15 Equipment: - includes infinitely rotating tiltator - includes automatic tiltator lubrication system We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / and more...) in stock and immediately available. Our warehouse offers a very large selection of various Westtech products that are ready for immediate delivery! Mr. Herden (by phone) is happy to assist you. Upon request, we will also be glad to provide a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. Giodpjyi R Atsfx Abrsn We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Moreover, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Errors and prior sale excepted! = More information = New: Yes Part suitable for: Forestry applications Please contact Tobias Ebert for further information.

Year of construction: 2024, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Westtech Woodcracker G1650 Root Rake / incl. grapple arms / incl. OQ70/55 adapter plate / in stock & immediately available / Year of manufacture: 2024 / DEMO unit / very good condition Price: €24,690.00 net / €29,381.10 gross - Working width (mm): 1,650 - Own weight (kg): 1,610 - Recommended hydraulic flow rate (l/min): 50 - 90 - Recommended operating pressure (bar): 200 - 250 - Carrier vehicle operating weight (t): 20 - 25 Equipment: - Incl. grapple arms - Incl. OQ70/55 adapter plate We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse we have a large selection of various Westtech products, all immediately available! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. Gisdpfx Abjyi R Aaeron We are an official Seppi M. sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker attachments! Errors and prior sale excepted. Internal no.: 523058 = More Information = New: No Intended use: Construction Please contact Tobias Ebert for further information.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm Gjdpsw Eu Akjfx Abrsin 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator Gjdpfx Aex D Nwdsbrein • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: ready for operation (used), Fully functional until dismantling, not refurbished! - Tmax 1200°C - Capacity 420 liters - Internal dimensions: w x d x h 700 x 600 x 1000 mm - Lifting door - Bentrup controller TC 507 Gsdeyi Tldopfx Abrein - Power 27 kW Viewing possible by appointment at any time. Not connected to power. Furnace, furnaces, hardening furnace, annealing furnace, industrial furnace, chamber furnace, firing kiln, curing oven, tempering furnace, chamber furnace, chamber dryer