Used Est Ticino for sale (2,920)

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Dodpfx Asx Tgr Tonwokl Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Djdpfx Anjx Di Rqswjkl Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Dkjdov S Dp Ispfx Anwol Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø Dkjdpfx Anjxtbf Eswjl 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Dodpfx Ansxqp I Newokl

Condition: used, Year of construction: 1976, turning diameter over cross slide: 470 mm, spindle bore: 130 mm, turning length: 1,500 mm, quill stroke: 300 mm, quill diameter: 130 mm, bed width: 600 mm, rotational speed (max.): 600 rpm, quill mount: MK 6, Manufacturer: EST Ticino Model: ET-BM 400 Turning length: 1,500 mm Swing over bed: Ø 800 mm Swing over slide: 470 mm Swing over gap: Ø 400 mm Gap length: 750 mm Dksdpfew Ewarjx Anwsl Spindle bore: 130 mm Spindle power: 15 kW Bed width: 600 mm Quill diameter: Ø 130 mm Quill stroke: 300 mm Spindle mount: 6 MK Spindle speed: 600 rpm Dimensions (approximate) Length: 4,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 5,200 kg With accessories: - Safety equipment - Faceplate, four-jaw chuck, clamping jaws, tool holder, centers, drill chuck, tools Please submit inquiries by email only. All information has been provided to the best of our knowledge. Subject to change. This offer is directed exclusively to businesses within the meaning of § 14 BGB. The sale is made with exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller or for injury to life, body, or health. For more information, please visit the Witzenmann GmbH website under the sections “Imprint”, “Terms and Conditions”, and “Data Protection”.

Condition: new, Speed relay - new, available sizes: ALNICO 01 (01T) ALNICO 02 (02T) ALNICO 04 (04T Dkedpfswa Sngex Anwsl ALNICO 11

Condition: used, pressure 160 t passage width / mm stroke / mm Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Dodpfx Ajiulkqjnwskl Removable table

Year of construction: 2023, condition: refurbished (used), This listing is for a vacuum packaging machine from manufacturer VakuMit, model EST 20 LC. The vacuum in this unit is detected using a proprietary, patented process developed by VakuMit. The vacuum packer is equipped with a powerful 21 m³/h pump. Operation is controlled via the LC control panel. The machine has been fully overhauled in our in-house workshop and is in perfect working condition. The base cabinet features ball-bearing drawers and castor wheels with brakes. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6 months warranty on electrical components (limited to replacement of defective parts, does not cover removal and installation costs) - High-quality branded equipment at fair prices - Professional refurbishment, inspection & expert cleaning - Tested & fully functional – money-back guarantee if not - Flexible shipping or collection options - Competent advice – before and after purchase - Provision of user manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 Technical specifications: Base cabinet (W x D x H): 470 x 620 x 760 mm Chamber size: 410 x 420 x 140 mm Seal bar length: 405 mm Power supply: 230 V / 1.3 kW Packaging output: approx. 1-2 cycles/minute Standard vacuum pump: 21 m³/h Weight: approx. 70 kg Machine number: 1900031023 Year of manufacture: 2023 Condition: used, fully refurbished, fully functional Dkodpfoyax Urjx Anwsl LC control – SemisSens Touch: - With push-button operation - Includes patented vacuum detection - Easy cleaning - User-friendly interface Further details: - Complete stainless steel vacuum chamber and housing - Easily removable seal bar - Automatic adjustment of sealing intensity - Service-friendly machine design - Soft-air return ventilation - Acrylic lid for monitoring the packaging process - Automatic operation cycle with lid opening - Vacuum detection (no timer-based controls) Shipping: Delivery or collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by special arrangement Subject to alterations and errors. If you have any questions, need advice or would like to view the machine on-site, please contact us by phone during our business hours: Monday–Friday 09:00 – 13:00 and 14:00 – 17:00. Sale only subject to our general terms and conditions (AGB).

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer Dksdpjub D Scofx Anwol -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm -Weight: 2.3 kg

Year of construction: 2008, condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Dodpfx Anolcd Szjwskl Location: ex stock 54634 Bitburg - immediately available -

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,346 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: electric, mast type: duplex, construction height: 2,950 mm, drive type: Elektro, Four-way side loader Mast type: Duplex Technical condition: good Dsdpfxevvpuws Anwskl Fork positioner,

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 & N Current consumption: 10 / 16 A Motor Power Main motor power: 12.5 HP Pump motor power: 0.05 HP Total power: 12.55 HP Dkedpfxey Iwyds Anwjl

Condition: used, Little used ethanol / alcohol dehydration plant manufactured in Spain in 2015 with capacity 90,000 litres/day of minimum concentration 99.8 ºGL alcohol suitable for use as biofuel. Raw material should be distilled alcohol with a minimum concentration of 95.5 ºGL. Major equipment includes: - (2) Molecular sieves; (2) vertical shell & tube heat exchangers; (4) horizontal shell and tube heat exchangers; alcohol evaporator; (2) plate heat exchangers; column; (2) process tanks; pumps and motors; instrumentation, controls and valves; steam boiler. Process description available on request. Dsdpfjyhc Ixjx Anwskl

Condition: excellent (used), Year of construction: 1997, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, turning diameter over top slide: 210 mm, Model: Student 2500 Gap Bed Lathe Dkodpoy N Upljfx Anwol Swing Over Bed: 330mm Swing Over Topslide: 210mm Swing In Gap: 480mm Distance Between Centres: 1000mm Spindle Speeds: 40-2500 RPM Spindle Bore: 40mm Motor: 2.2 KW Machine with: 3 Jaw Chuck Collet Chuck and Collets Digital Readout Quick Change Toolpost with Holders Dimensions: 2130 x 1020 x 1450mm High Weight: 800 KGS

Condition: excellent (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter: 350 mm, turning diameter over bed slide: 350 mm, turning diameter over top slide: 196 mm, center height: 175 mm, turning length: 650 mm, Model: Multiturn 1000 Control: Fanuc Oi-TC Year: 2007 S/No.: N91013 Swing Over Bed: 350mm Swing In Gap: 535mm Dkedpfey N Uk Nex Anwol Swing Over Top Slide: 196mm Distance Between Centres: 650mm Spindle Speeds: 1-3500 RPM (3 Ranges) Spindle Bore: 42mm Motor: 7.5 KW Machine with: 150mm 3 Jaw Chuck Duplumatic 8 Station Turret Turret Tool Holders Tail Stock Coolant Pump

Condition: used, Colour: Grey Extraction system Modesta Capacity +/- 18,000m³/h Chain transport with lock Complete with switch box Dkjdpfxswnhahs Anwel Exhaust fan 22 kW Transport fan 5.5kW Filter bags in good condition Filter bags 160 pcs Filter length 2400mm Filter diameter 200mm Dry extuingisher pipeline. Transport dimensions: 6500x2450x3250mm (LxWxH), + 4 loading meters of loose parts. Weight +/- 4000kg Set up dimensions 6500 x 2500 x 3950 mm (L x W x H) - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 160 - Filter length [mm]: 2400 - Filter diameter [mm]: 200 - Main fan power [kW]: 22.0 - Extinguishing system: Yes - Control cabinet present: Yes - Shaking system: No - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 5.5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Festo EMMS-ST-87-S-S-G2 stepper motor 1370482 SN:MN-0001012, unused in opened original packaging, 100% functional, scope of delivery as per photos Djdpfx Anoi D H Smowjkl

Condition: new, Festo DGSL-12-50-Y3A Mini slide 543979 ,unused in sealed original box, 100% functional, scope of delivery according to photos Dkodpfx Anoi D U Iuowol

Condition: ready for operation (used), Festo Electronic E.FEA-88 , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Dedpei D U Ngjfx Anwskl

Condition: used, Dimensions (LxBxH): 170 x 65 x 160 cm Dsdpfx Aeyymxysnwokl Price: On request - Details: - └ Description: Roller width 1050mm - Documentation available: No - CE certificate present: No - Voltage [V]: 220 - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, 0400 mm 1250 mm 200 mm 55 mm 315 mm 2700 U/min D1-6 DIN 55029 Djdpfx Asy Nd T Tenwjkl 73 mm 140 mm

Condition: good (used), Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Dkjdpfx Anoy N Uq Aowjl Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 17,000 kg, operation weight: 17,000 kg, Year of construction: 2009, operating hours: 6,330 h, Keestrack Combo/3 Fraction/Screen/Various Screen Decks/Radio Remote Control • Manufacturer: Keestrack • Model: Combo 2712 T • Year of manufacture: 2009 • Operating hours: 6,330 h • Screen box: L: 2.70 m x W: 1.20 m • Fine material belt under screen box: L: 3 m x W: 80 cm • Oversize material conveyor: L: 4.50 m x W: 1 m • Left side conveyor (fine fraction): L: 8 m x W: 65 cm • Right side conveyor (medium fraction): L: 8 m x W: 65 cm Dedpfx Anoyyyq Nswokl • Crawler chassis: L: 3.55 m x W: 40 cm • Radio remote control • Engine: Deutz 4 cylinder diesel engine • Gross weight: 17,000 kg • German machine • Immediately operational • This offer is non-binding and subject to prior sale. - Interim sale reserved, - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: good (used), Year of construction: 2012, operating hours: 5,812 h, Baler Presto HPK 50 HS, year 2012, with perforator and inclined conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Pressing force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1380 x 1200 mm Inclined conveyor: Length: 7,931 mm Belt width: 1,400 mm Dedpfxey Idife Anwekl Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical data are based on manufacturer specifications. We accept no liability for the given information or possible errors. Sale is subject to prior sale and changes, and may be revoked at any time. Viewing is possible by arrangement. Sale ex works, prepayment required, without warranty or guarantee.