Used Est Ticino for sale (2,878)

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Gsdpfx Ajtr Ud Sebrjtu Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Gtsdpfx Abjx D Nwderou Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ Godpfx Aek Abl Nsbrjtu 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Westtech Woodcracker CS780 / incl. Power-Tiltator / incl. OQ 70/55 adapter plate / only 93 operating hours / year of manufacture: 2022 / immediately available / excellent condition! Gsdpfx Aboyi R Dqorstu Price: €47,890.00 net / €56,989.10 gross Features: - Power-Tiltator, infinitely rotatable - Cutting diameter: 750 mm - Grab opening width: 1,600 mm - Own weight (basic - fully equipped): 2,000 - 2,200 kg - Recommended oil flow: 120 - 170 l/min - Recommended auxiliary circuit flow: 50 - 70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 20 - 28 t - Tilt function for cutting process: automatic - Saw box: actively sprung - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. OQ 70/55 adapter plate We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We keep a large selection of various Westtech products in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide you with a tailored financing offer upon request. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telescopic handlers - JCB construction machinery - Mercedes-Benz - Iveco Also, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Errors and prior sale excepted! Internal ID: 122025 = Additional information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Year of construction: 2025, condition: used, For inquiries regarding the attachment, Mr. Herden will assist you (by phone). Westtech Woodcracker CS610 compact / incl. Power-Tiltator / incl. MS10 adapter plate / Year of manufacture: 2025 / DEMO unit / available immediately / top condition! Price: €39,990.00 net / €47,588.00 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic to fully equipped): 830 - 1,060 kg - Recommended hydraulic flow: 65 - 110 l/min - Recommended auxiliary hydraulic flow: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Carrier vehicle operating weight: 15 - 20 t - Sawbox: actively sprung - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. MS10 adapter plate We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of various Westtech products available for immediate delivery from our warehouse! Mr. Herden (phone) will be happy to assist you. Upon request, we are happy to provide a financing offer. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker range! Subject to errors and prior sale! Gtodjyi R Dkopfx Abrou Internal no.: 422068 = Further information = New: No Part suitable for: Intended use Forestry Please contact Marius Herden for further information.

Year of construction: 2025, condition: used, For inquiries regarding this attachment, Mr. Herden will be pleased to assist you (by phone). Westtech Woodcracker CL190 Felling Grapple / In stock & immediately available / Year of manufacture: 2025 / DEMO unit / Very good condition Price: €3,895.00 net / €4,635.00 gross - Cutting diameter softwood (mm): 250 - Cutting diameter hardwood (mm): 190 - Grapple opening = shear opening (mm): 685 - Own weight (basic – fully equipped) (kg): 210 - 400 - Recommended hydraulic flow main circuit (l/min): 40 - 80 - Recommended operating pressure main circuit (bar): 250 - Recommended hydraulic flow auxiliary circuit (l/min): 20 - 30 - Recommended operating pressure auxiliary circuit (bar): 200 - Carrier vehicle operating weight (t): 2.5 - 7.5 We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a large selection of various Westtech products in our warehouse that are ready for immediate delivery! Mr. Herden (phone) will be pleased to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. Gjdpjyi R Ddofx Abrotu We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal No.: 252332 = More information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Year of construction: 2024, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker CS545 compact grapple saw / incl. endless rotating tiltator / year of manufacture: 2024 / in stock & immediately available / excellent condition, almost as new Price: €27,790.00 net / €33,070.10 gross Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (basic version – fully equipped) (kg): 610 – 780 Recommended main hydraulic flow (l/min): 50 – 100 Recommended auxiliary hydraulic flow (l/min): 35 – 50 Recommended operating pressure (bar): 200 – 250 Carrier vehicle operating weight (t): 8 – 15 Equipment: - incl. endlessly rotating tiltator - incl. automatic tiltator lubrication system (grease lubrication) We have a large selection of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse stocks a wide range of various Westtech products, all available for immediate delivery! Mr. Herden (Tel. ...) is at your disposal for assistance. We are happy to provide you with a financing offer upon request. We are an official sales and service partner for the following: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles we are one of the largest commercial vehicle dealers in Germany. We deliver the complete Westtech Woodcracker product range! Errors and prior sale excepted. Gtjdsyi R A Hjpfx Abrju Internal no.: 624005 = More information = New: No Part suitable for: Application forestry Contact Marius Herden for more information.

Condition: used, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. Westtech Woodcracker CS545 compact grapple saw / incl. endlessly rotating tiltator / NEW unit / in stock & immediately available Cutting diameter (mm): 540 Grapple opening (mm): 1,270 Own weight (base – full equipment) (kg): 610 – 780 Recommended oil flow main circuit (l/min): 50 – 100 Recommended oil flow auxiliary circuit (l/min): 35 – 50 Recommended operating pressure (bar): 200 - 250 Carrier vehicle operating weight (t): 8 – 15 Features: - incl. endlessly rotating tiltator - incl. automatic lubrication system for tiltator We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...), available immediately. Our warehouse has a wide selection of various products from Westtech, ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. Gjdpfx Abjyi R Aterstu We are an official sales and service partner for Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We provide you with the complete range of Westtech Woodcracker products! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application in forestry Please contact Marius Herden for more information.

Year of construction: 2024, condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (by phone). Westtech Woodcracker G1650 Grubbing Rake / incl. grapple arms / incl. OQ70/55 adapter plate / in stock & immediately available / Year of manufacture: 2024 / DEMO unit / excellent condition Price: €24,690.00 net / €29,381.10 gross - Working width (mm): 1,650 - Own weight (kg): 1,610 - Recommended oil flow (l/min): 50 - 90 - Recommended operating pressure (bar): 200 - 250 - Carrier unit operating weight (t): 20 - 25 Equipment: - Including grapple arms - Including OQ70/55 adapter plate We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Gtedpfxjyi R Aae Abrju We have a very large selection of various Westtech products available in our warehouse and ready to ship! Mr. Herden (phone) is happy to assist you. We are pleased to offer you a financing proposal upon request. We are an official sales and service partner of Westtech. We are an official sales and service partner of Gierking GMT. We are an official sales and service partner of OilQuick. We are an official sales and service partner of Weber MT. We are an official sales and service partner of Holp. We are an official sales and service partner of DMS. We are an official sales and service partner of Seppi M. We are an official sales and service partner of Magni telehandlers. We are an official sales and service partner of JCB construction machinery. We are an official sales and service partner of Mercedes-Benz. We are an official sales and service partner of Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal no: 523058 = More information = New: No Application: Construction Please contact Marius Herden for more information.

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56 Gtsdpfxjw Eu Ake Abrou

Condition: ready for operation (used), Fully functional until dismantling, not refurbished! - Tmax 1200°C - Capacity 420 liters - Internal dimensions: w x d x h 700 x 600 x 1000 mm - Lifting door - Bentrup controller TC 507 - Power 27 kW Gtedpfx Abeyi Tldorsu Viewing possible by appointment at any time. Not connected to power. Furnace, furnaces, hardening furnace, annealing furnace, industrial furnace, chamber furnace, firing kiln, curing oven, tempering furnace, chamber furnace, chamber dryer

Condition: used, • A-frames for jumbo dimensions • 5 feet form one frame - 30 feet available = 6 frames • Cross tubes included • Glass support area: 2 x 280 mm • Price: €300 / unit Gtedpfoyf En Asx Abrsu

Condition: used, • Glass transport rack for double-sided loading Gjdpfeyf Eafsx Abrotu • Length: 3,390 mm • Width: 1,100 mm • Loading height: 2,000 mm / possibility of overloading upward • Total height: 2,240 mm / incl. crane rings • Support depth per side: 400 mm / 390 mm usable • Load capacity: 2,000 kg 45 units • Price on request

Condition: new, For inquiries regarding the vehicle, Mr. Herden will be happy to assist you (by phone). Brian James Cargo Digger Plant 2 (2,700 kg) Price: €4,630.00 net / €5,509.70 gross Gjdpjyi Abzsfx Abrotu New vehicle without first registration! Loading platform dimensions: 2.80 m x 1.30 m Gross vehicle weight: 2,700 kg Payload: 2,152 kg Equipment: - Includes individual ramps - Includes spare wheel - Includes digger bucket holder We have a very large selection of various Brian James trailers in stock—available immediately! Mr. Herden (phone) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official sales and service partner for the following brands: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We offer the complete Brian James range! Errors and interim sales excepted. Internal ID: 050186 = Further information = Payload: 2,152 kg Please contact Marius Herden for further details.

Condition: good (used), Year of construction: 1998, Intake nozzle diameter: 140 mm Filter area: 9.6 m² Gtjdpfx Aboyfmxcereu Max. air flow rate: 1,330 m³ Min. air flow rate (V min): 1,108 m³ Motor: 3 kW Dimensions (L x W x H): approx. 1,700 x 800 x 2,025 mm All information provided without guarantee. Data taken from a brochure.

Year of construction: 2022, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Westtech Woodcracker CL320 Felling Grapple / in stock & immediately available / Year of manufacture: 2022 / DEMO unit / like new Price: €8,890.00 net / €10,579.10 gross Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended main circuit oil flow (l/min): 70 – 150 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 45 – 60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 12 – 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. Our warehouse holds a wide selection of various Westtech products, all immediately available! Godpfeyix N Uex Abrstu Mr. Herden will be happy to assist you (by phone). Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal ref. no.: 121059-F = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, For inquiries regarding this attachment, please contact Mr. Herden (via telephone). Westtech Woodcracker C450 Harvesting Grapple / incl. collection grapple / incl. rotator / incl. autospeed function / incl. power rotator / incl. OQ70/55 quick coupler adapter plate / incl. V90 electrical connector / incl. electrohydraulic switching / in stock & immediately available / Year of manufacture: 2022 / very good condition Price: €50,390.00 net / €59,964.10 gross - Cutting diameter softwood (mm): 500 - Cutting diameter hardwood (mm): 450 - Grapple opening (mm): 1,600 - Shear opening (mm): 800 - Own weight (basic – fully equipped) (kg): 1,760 – 2,350 - Recommended hydraulic flow main circuit (l/min): 80 – 160 - Recommended operating pressure (bar): 280 - Recommended hydraulic flow auxiliary circuit (l/min): 45–60 - Carrier vehicle operating weight (t): 20 – 25 Equipment: - incl. collection grapple - incl. autospeed function - incl. endless rotator - incl. power rotator - electrohydraulic switching between collection grapple and rotator - incl. OilQuick OQ70/55 adapter plate - incl. V90 electrical connector Gsdpfoyix N Isx Abrotu We also have a wide range of further adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a large selection of various products from Westtech that are available for immediate delivery! Mr. Herden (phone) will be happy to assist you. On request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Magni telehandlers, OilQuick, Weber MT, Holp, DMS, Gierking GMT, Seppi M., Westtech, JCB construction equipment, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products for you! Subject to prior sale and errors! Internal No.: 522255 = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further details.

Year of construction: 2023, condition: used, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Westtech Woodcracker C450 Felling Grapple / incl. Accumulation Grapple / incl. Tiltator / incl. Autospeed Function / incl. Electrohydraulic Switching / immediately available / Year of manufacture: 2023 / DEMO unit / very good condition Price: €41,390.00 net / €49,254.10 gross Cutting diameter softwood (mm): 500 Cutting diameter hardwood (mm): 450 Grapple opening (mm): 1,600 Shear opening (mm): 800 Own weight (basic - full equipment) (kg): 1,760 – 2,350 Recommended main circuit flow rate (l/min): 80 – 160 Recommended operating pressure (bar): 280 Recommended secondary circuit flow rate (l/min): 45-60 Carrier vehicle operating weight (t): 20 – 25 Equipment: - Accumulation grapple - Autospeed function - Tiltator with endless rotation - Electrohydraulic switching between accumulation grapple and tiltator Option: MS21 adapter plate including bolts and installation = €2,400.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a large selection of different Westtech products in stock and ready for immediate delivery! Gtjdpfjyix Nzox Abrju Simply contact us at / . Upon request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner of Westtech. We are an official sales and service partner for Magni telehandlers. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Moreover, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker range! Subject to errors and prior sale! Internal No.: 523301 = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Year of construction: 2023, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker T4000 Telescopic stage / incl. CS510 crane / in stock & immediately available / Year of manufacture: 2023 Price: €43,990.00 net / €52,348.10 gross Westtech T4000 Telescopic Stage - Working range up to (mm): 6,350 - Telescopic extension (mm): 4,000 - Own weight (kg): 680 – 730 - Lifting moment from excavator kinematics (kNm): 92 - Permitted load capacity (retracted / extended in kg): 2,500 / 1,550 - Maximum push force (kg): 100 - Recommended hydraulic flow for telescopic extension (l/min): 50 – 110 - Recommended hydraulic flow auxiliary circuit (l/min): 30 – 40 - Recommended operating pressure for telescopic extension (bar): 250 - Carrier vehicle operating weight (t): 14 – 22 Westtech CS510 crane - Cutting diameter (mm): 540 - Grapple opening (mm): 1,270 - Own weight (basic equipment - full equipment in kg): 370 – 500 - Recommended hydraulic flow (l/min): 50 - 90 - Recommended operating pressure (bar): 200 – 280 Gtodeyix Nujpfx Abreu Equipment: - Incl. Auto tilt function for crane - Incl. Rotator RTC 10-2 - Incl. Pendulum joint with brake - Incl. Transport box for CS510 crane Optional: Lehnhoff MS21 adapter plate incl. bolts and installation = €2,400.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide range of various Westtech products available in our warehouse! Mr. Herden (phone) is happy to assist you. Upon request, we are happy to offer you finance options as well. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sale excepted! Internal No: 523028 / 523088 = More information = New: No Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker C300 Felling Grapple / incl. endlessly rotating tiltator / incl. collection grapple / NEW unit / in stock & immediately available Softwood cutting diameter (mm): 350 Hardwood cutting diameter (mm): 300 Grapple opening (mm): 1,430 Shear opening (mm): 550 Own weight (basic – fully equipped) (kg): 750 – 1,080 Recommended main circuit flow rate (l/min): 70 – 150 Recommended auxiliary circuit flow rate (l/min): 45 – 60 Recommended operating pressure (bar): 280 Carrier vehicle operating weight (t): 12 – 18 Equipment: - incl. Autospeed function - incl. collection grapple - incl. endlessly rotating tiltator - incl. electro-hydraulic switching between collection grapple and tiltator We have a wide selection of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. Our warehouse holds a very large selection of various Westtech products that are immediately available! Mr. Herden (phone) will be happy to assist you. On request, we are also pleased to provide a financing offer. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are also one of the largest commercial vehicle dealers in Germany, with 800 used vehicles in stock. We supply the full range of Westtech Woodcracker products for you! Gtsdoyix Nnepfx Abreu Errors and prior sale excepted! = Further Information = New: Yes Part suitable for: Forestry applications Contact Marius Herden for more information.

Year of construction: 2022, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker CS610 compact / incl. Power-Tiltator / incl. Liebherr Likufix SW48 adapter plate / Year of manufacture: 2022 / DEMO unit / immediately available / excellent condition! Price: €42,690.00 net / €50,801.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic to fully equipped): 830 – 1,060 kg - Recommended hydraulic flow rate: 65 – 110 l/min - Recommended auxiliary flow rate: 40 – 60 l/min - Recommended operating pressure: 230 – 280 bar - Carrier machine service weight: 15 – 20 t Gedpsyix I Rofx Abrotu - Saw box: active suspension - Saw chain lubrication: grease Equipment: - incl. Power-Tiltator - incl. Liebherr Likufix SW48 adapter plate Optional: Electrical connector for Liebherr Likufix SW48 with installation = €1,400.00 net We stock many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55, etc.) and they are immediately available. Our warehouse has a large selection of various Westtech products immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide a financing offer. We are an official sales and service partner for the following brands: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal no.: 422060 = Further information = New: No Unladen weight: 1,060 kg Part suitable for: Forestry applications Contact Marius Herden for further information.

Year of construction: 2021, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone). Westtech Woodcracker G1250 Root Rake / incl. grab arms / in stock & available immediately / Year of manufacture: 2021 Price: €14,890.00 net / €17,719.10 gross - Working width (mm): 1,250 - Own weight (kg): 1,420 - Recommended oil flow (l/min): 50 – 90 - Recommended operating pressure (bar): 200 – 250 - Carrier vehicle operating weight (t): 15 – 22 Equipment: - Incl. grab arms Optional: Volvo S60 adapter plate incl. bolts and installation = €1,500.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and available immediately. We have a wide selection of various Westtech products in stock and available immediately! Mr. Herden (Tel.) will be happy to assist you. On request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. Gtedoyix Iqepfx Abrou We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Subject to errors and prior sale! Internal no.: 621068 = More information = New: No Intended use: Construction Unladen weight: 1,420 kg Contact Marius Herden for more information.

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 1,000 mm, table length: 5,000 mm, table width: 2,000 mm, CNC Gantry Milling Machine Forest Line Seramill 240T – Robust & Precise For sale: Forest Line Seramill 240T CNC gantry milling machine, year 2000 – used, in excellent condition. Perfect for machining large workpieces with high precision. Key Features: Robust gantry design for maximum stability Accurate Siemens 840D control Large working area: 5,000 × 2,000 mm Travel: X 5,500 mm | Y 2,900 mm | Z 1,000 mm | A ±135° | C ±180° ISO 50 spindle, max. 6,000 rpm Ideal for series production and individual parts Gedpfx Abeyfpkbsrjtu Perfect for carpenters, furniture manufacturers, and production workshops that want to machine large parts precisely. Available immediately! Contact us for details, photos, or a viewing.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Gtedpfx Abjvnr Rrsrju Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Technical Data for the Pallet Racking System: Racking System: Arestant Type: AS Setup Details: Number of rack rows: 01 unit Length per rack row: 19,575 mm Number of bays per rack row: 07 units Number of levels incl. ground level: 02 units Volume Data: Pallet locations per bay: 09 units Pallet locations per rack row: 63 units Total pallet locations: 63 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n/a Weight per pallet (max.): n/a Scope of delivery includes: 08x pallet rack uprights, used Colour: blue Frame type: 878 Profile dimensions: 80 x 77 x 1.8 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted lattice structure) 4,000 mm high 1,100 mm deep 28x pallet rack beams, used Colour: orange Box profile: 120 x 50 mm Connector: 4 HK (hooks) Clear width: 2,705 mm 56x safety pins, used Finish: sendzimir galvanized For securing beams against unintentional lifting 32x anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: carbon steel, galvanized Approved for: cracked concrete Gtodpow Ud U Hsfx Abrju 16x leveling plates, used Finish: fully galvanized For leveling uprights on uneven floors 01x load sign With specifications for bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. If you require shipping or transport, additional costs will apply. These can be requested separately depending on destination and scope of delivery.