Used External Threading Machine for sale (22,903)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm MACHINE DETAILS Ijdpfx Aexxar Uoaastp Installed total power: 5 kW Motor power: 3 kW

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thicknesses Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper Itodpfoxxklfsx Aaasp NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser source model: TruFlow 4000, table length: 3,000 mm, table width: 1,500 mm, workpiece weight (max.): 900 kg, TRUMPF laser cutting machine with LiftMaster! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Accuracy Smallest programmable increment: 0.001 mm Position deviation Pa: ±0.1 mm Mean position scatter Ps: ±0.03 mm Workpiece Maximum workpiece weight: 900 kg Maximum speeds Parallel to axis: 100 m/min Simultaneous, approx.: 140 m/min MACHINE DETAILS Ijdpjxwn S Hsfx Aaaotp Laser: TruFlow 4000 Controller: Siemens Machine weight: 13,000 kg EQUIPMENT LiftMaster

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg Itedpoxvx U Ajfx Aaajp FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! Iodpfsxxih Eex Aaaotp TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Carbon traverse (crossbeam) Composite body Pallet changer Various nozzles Protective lenses

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Iedsxwcyfopfx Aaaetp Spindle speed: 2,000 rpm MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Iedpfxoxxal Is Aaajtp Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW Iedpfx Ajxurtioaaetp DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Dimensions of the control cabinet: 1,000 x 480 mm

Condition: ready for operation (used), Year of construction: 2016, This Brown & Sharpe XCEL 7-107 CMM was manufactured in 2016. It features a measuring range of 700 x 1000 x 700 mm, equipped with a Renishaw PH10M probe head and PC-DMIS software. Located in Greensboro, NC, with forklift and dock access available. If you are looking to get high quality measuring capabilities consider the Brown & Sharpe XCEL 7-107 machine we have for sale. Contact us for more information. Application Types Itedsxvtz Dspfx Aaaop Measuring

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: Ijdjxxm Hfopfx Aaastp On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece length (max.): 5,600 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 600 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 2,100 mm Max. workpiece length: 5,600 mm Max. workpiece height: 600 mm Isdpfx Aoxw U U Ujaajtp

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, number of print heads: 5, delivery head: 950 mm, product height (max.): 19 mm, product length (max.): 1,600 mm, product width (max.): 1,200 mm, Digital printing machine in clean room! TECHNICAL DETAILS Product dimensions Max. product dimensions: 1,600 x 1,200 mm Min. product dimensions: 300 x 300 mm Product thickness: 3–19 mm Conveyor height: 950 mm Itedpfsxuhz Asx Aaaop Printing speed: 80 m²/h MACHINE DETAILS Number of print heads: 5 Clean room dimensions External length: 10,500 mm External width: 3,800 mm Internal length: 10,340 mm Internal width: 3,640 mm Weight: 2,500 kg Electrical data Power supply: 400 VAC / 32 A Installed power: 10 kW Compressed air Compressed air connection: 6.0 bar Air consumption: 50 l/min EQUIPMENT 1 infeed conveyor 3 outfeed conveyors

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Application Types Injection Moulding Itsdoxpywfjpfx Aaajp

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Minimum processable height: 6 mm Maximum processing height: 120 mm Minimum processing length: 370 mm Maximum processing length: 8,483 mm Minimum processing width: 25 mm Maximum processing width: 230 mm Maximum feed speed: 12 m/min Drive rollers Number of rubber rollers: 1 Number of gear rollers: 4 Total number of rollers: 5 UNITS Unit 1 Saw spindle: bottom Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 2 Itodpfx Aexw U Syeaajp Saw spindle: right Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Unit 3 Saw spindle: left Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Unit 4 Saw spindle: top Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control type: Siemens Simatic Panel Touch Installed total power: 24 kW EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Unit: combined roller/pad Roller material: rubber Itsdpfexw U Eaox Aaajp Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Iodpfx Aaoxw U Areajtp Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Itedpfx Aexw T Tpeaasp Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Itedpexw T H Nofx Aaaop Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Isdpfxoxw Tuge Aaajtp Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Itedpfxoxw Ttvo Aaaep Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Maximum rotation speed: 12,000 rpm Edge processing unit 2 Ijdpfx Ajxw Tngoaaotp Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking

Condition: used, machine/vehicle number: 007329, X axis working area: 3200 mm Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Ijdpfx Aajxn Nfvsaetp Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 007328, X axis working area: 3200 mm Itsdpfjxmgybox Aaaep Y axis working area: 1850 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Number of controlled axes: 3 axes Total number of drilling spindles: 31 Total number of tool changer positions: 10

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Itedpfxowuclxo Aaaep

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Iodpfst Hmt Iox Aaajtp