Used External Threading Machine for sale (21,259)

Condition: used, Year of construction: 1996, Thread rolling machine Ingramatic RP21 RV With sems unit Flat dies Year: 1996 Diameter : max 8 mm Shaft length under head: 80 mm Dkedpoylw N Sofx Ap Iju Max. thread length: 58 mm

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm Dkedoymlx Dspfx Ap Ieu

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm thread pitch 100 mm Dkodpfxet H Smte Ap Ieu total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW weight of the machine ca. 10,5 t Dkjdpfx Aotzdyzsp Iju dimensions of the machine ca. m

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M14L/9095, Offer Number: M14L/9095 Machinetype: thread rolling machine - flat die Info: complete overhaul Make: MENN Type: GW82 Constr. year: 1983/2021 diameter range: M5-M10 shaft length under head: 100 mm max. thread length: 63 mm Dsdpfxoz At H To Ap Ioku output pieces/min: 50-220 Location: In our warehouse

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Dkodpfx Apsyml Eks Isu Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: like new (used), Year of construction: 2021, operating hours: 900 h, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle diameter: 200 mm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Dedpszz Rt Uefx Ap Ioku Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, workpiece weight (max.): 2,000 kg, thread length: 3,000 mm, Ø400, LENGTH 3000 mm, MODULE 8-10, HELICAL AND STRAIGHT GEAR CUTTING. Dkodpfx Ajzkrgbep Iju

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) Djdpfx Asy Umdlep Ieku - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: ready for operation (used), 1 Threaded-spindle drill press FLOTT NNP 15-II without a vise Dkedpfxei Aputo Ap Ieu

Condition: new, Hydraulic thread cutting machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread: M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic thread cutting machine Incl. machine base with clamping plate Mobile Hydraulic pressure gauge Stepless speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Dodpfxekhmgis Ap Ioku Special accessories included / quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: good (used), Threading machine, bench drill, pillar drill Djdpjyvfzwofx Ap Ioku Manufacturer: Hagen

Condition: used, Universal external and internal cylindrical grinding machine CINCINNATI - MSO, Type R75 Serial No. 27782, Year of manufacture 1976 Center distance max. 805 mm Workpiece grinding length max. 800 mm Center height 130 mm Swinging diameter max. 250 mm Workpiece grinding diameter max. 250 mm Workpiece weight between centers max. 75 kg Workpiece weight in chuck max. 20 kg Workpiece spindle speed 50 - 390 rpm Tailstock internal taper MK 5 Tailstock short taper flange DIN 55027, Size 5, Ø 82 mm Tailstock spindle bore 38 mm Djdpfxsz Ek Sis Ap Ioku Headstock internal taper MK 3 Grinding wheel diameter max. 300 mm Grinding wheel width max. 40 mm Grinding wheel peripheral speed 30 m/sec Tailstock quick traverse 50 mm Automatic tailstock feed 0.005 to 0.03 mm Manual feed 0.0025 mm Hydraulic table movement 0.05 - 6 m/min Motor power grinding spindle 3 kW Motor power workpiece spindle 0.75 kW Motor power internal grinding attachment 0.75 kW Power connection 380 Volt, 50 Hz - Feed and plunge system, manual or automatic feed - Grinding spindle swivels +/- 90° - Workpiece spindle swivels 0 to 90° - Table tilt for taper grinding up to 10° - Counter support / quill for the workpiece spindle with internal taper MK 3 - Internal grinding spindle missing, internal grinding attachment for swiveling - Coolant system adjacent - 1 diamond grinding wheel dresser - 3 grinding wheels with grinding wheel arbors - 1 grinding wheel without grinding wheel arbor - 1 grinding wheel puller - 1 reducing sleeve - 3 centering pins - Several drive dogs - Operating manual with electrical diagram Space requirement L x W x H 2350 x 2000 x 1600 mm Weight 2500 kg Good condition

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: M14L/8559, Offer Number: M14L/8559 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: MENN Type: GW62 Dksdowi Sxwopfx Ap Isu Constr. year: 1973/92/23 diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: In our warehouse

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: M14L/8133, Offer Number: M14L/8133 Machinetype: thread rolling machine - flat die Info: tube feeder for studs and headless parts Make: PELTZER-EHLERS Type: NKW12-ST8 Constr. year: 1971 diameter range: 6-12mm shaft length under head: 95 mm max. thread length: 90 mm output pieces/min: 55 Dkjdpfx Apjwi S Irj Iou Location: In our warehouse

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph Dkedpferb Akmex Ap Iou - Infinitely variable speed adjustment - Digital speed display - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Djdpeyl U Tusfx Ap Ijku Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm Dkjdjupbf Djpfx Ap Isu throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Dkodpfjyl Ntpjx Ap Isu

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine The CORMAK RGE36PWx1700 electric tapping machine is an advanced thread-cutting device designed for both large production facilities and smaller workshops. This tapping machine significantly reduces thread machining time, increasing work efficiency and improving the precision of manufactured threads. It has been developed to provide high reliability, ease of operation, and versatility across a wide range of industrial applications. Main advantages of the CORMAK RGE36PWx1700 Electric Tapping Machine High precision and fast tapping: Thanks to the powerful servo drive and tapping arm, the machine ensures accurate thread cutting in a short time, which is essential for serial production. Easy operation: The machine is equipped with a touchscreen control panel available in Polish and English, allowing simple adjustment of tapping parameters such as spindle speed, tapping direction, and thread depth. High flexibility: The tapping arm enables thread cutting at various angles, while the rotating motor assembly allows precise positioning of the machine for different applications. Efficient cooling system: The micro-spray lubrication system cools the tools with minimal lubricant consumption, extending tool life and reducing material waste. Comprehensive equipment: The tapping machine includes a chip blow-off system, improving visibility of the workpiece and increasing overall work efficiency. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction designed for efficient and precise tapping in various industrial environments. The machine is powered by a servo drive, ensuring reliable operation and accurate control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can perform threading in a wide range of materials, including steel, stainless steel, aluminium, and non-ferrous metals. The tapping arm is equipped with a quick-change tool holder, allowing fast and convenient installation of taps. Adjustable overload clutches integrated into the tap holders provide additional tool protection during operation. This system also allows precise adjustment of torque settings, ensuring accurate and repeatable tapping results. Dkjdpfx Apovugrqj Isu Standard Equipment of the CORMAK RGE36PWx1700 Tapping Machine Touchscreen control panel: Enables easy programming of tapping parameters such as spindle speed, tapping direction, and thread depth. Rotating tapping arm: Allows thread cutting at any required angle. Tap holders with overload clutches: Protect the machine against excessive loads and ensure long-term durability. Micro-spray lubrication system: Provides continuous tool cooling with minimal coolant consumption. Chip blow-off system: Removes chips and improves visibility during tapping operations. Technical Specifications of the CORMAK RGE36PWx1700 Tapping Machine Parameter Value Power 2 kW Power supply 230 V Weight 56 kg Maximum arm reach 1700 mm Maximum spindle speed 125 rpm

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Dsdpfxspag R Re Ap Isku Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. Djdpfx Apolcbkge Ioku The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: used, shaft length under head: 80 mm, thread length: 58 mm, GW 63 / GW 63SX flat-die thread rolling machines, various models, good condition, top-of-the-line electrical system Dkodpjwkqvqsfx Ap Ieu EW Menn including vibratory feeder, Skako, and slide conveyor

Condition: excellent (used), functionality: fully functional, 1 x Thread-drilling machine Steinel BT 6.52 with coolant system Dodpfx Apezk Iyqo Ieku + small vise Technical specifications: Max. thread size: M 6 (further technical specifications see photos) The machine can be inspected while powered on.

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : Dkjdsy Umd Espfx Ap Isu - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert