Used Extractor 4 Bag for sale (59,755)

Condition: excellent (used), For sale: a Getriebebau NORD gearmotor with a worm gear and a three-phase motor. The unit is fully functional, tested, and ready for operation. The technical condition is very good, with normal signs of wear and tear resulting from use. This gearmotor is ideally suited for driving conveyors, feeders, industrial machinery, mixers, and other devices requiring high torque at low speeds. Technical data: Gear manufacturer: Getriebebau NORD Gear type: 1S50VZ.71 L/4 Gear ratio: i = 35.00 Output speed: 40 rpm Motor manufacturer: NORD Motor type: SK 71L/4 Power: 0.37 kW Supply voltage: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Motor speed: 1360 rpm (50 Hz) Gsdpfx Amjznk U Eo Aobr 1630 rpm (60 Hz) Protection class: IP55 Insulation class: F Operating mode: S1

Condition: new, empty load weight: 9,980 kg, maximum load weight: 30,020 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2022, loading space length: 10,200 mm, loading space width: 2,520 mm, loading space height: 950 mm, suspension: air, tire size: 235/75R17.5, color: grey, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, turntable, air suspension, ABS (anti-lock braking system), can be widened to 3m, lashing eyes, two-part loading ramps, hydraulic ramps, side aluminum fender, twin tires, wheel recesses. Superstructure: 4-axle low-bed trailer with wheel recesses, excavator arm recess, and hydraulic ramps, 4x 10t SAF axles, drum brakes, total weight technically 40,000 kg, loading length of the curved section approximately 2,800 mm, loading length of the low-bed platform approximately 7,400 mm, can be widened to 3,000 mm, 50 mm drawbar eye, 1st pair of wheel recesses approximately 1,600 mm long, 2nd pair of wheel recesses approximately 600 mm, ramp length approximately 3,850 mm, ramps are hot-dip galvanized, ramps can be hydraulically shifted sideways. Loading height of front wheel recess approximately 560 mm! Loading height of rear wheel recess approximately 650 mm! Gbedjzg Ev Uopfx Am Aor New vehicle from stock, first registered on 09.02.2022! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR worm gear motor with a WEG AL71-4 three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. Only normal signs of wear are visible, consistent with its use. Thanks to its compact and robust design, it is ideally suited as a drive in industrial machines, conveyors, production lines, packaging equipment, and automation systems. The GSN04 series is a range of compact gear motors designed for applications requiring reliable power transmission. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: WEG Motor type: AL71-4 Power: 0.37 kW Power supply: 3× 220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1370 rpm Output speed: 140 rpm Gear ratio: i = 10 Output torque: 22 Nm Protection class: IP55 Insulation class: F Gsdpfx Aszmyybsm Asbr Operating mode: S1 (continuous operation) The scope of supply includes exactly what is shown in the pictures.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location Gbedpfx Aozrr Nfem Ajr - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, mileage: 85,000 km, power: 132 kW (179.47 HP), first registration: 04/2016, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, Manufacturer Renault Model D 7.5 180 4x2 Semat/Techno AZIMUT 8 Skraldebil Year 2016 Condition Very good Serial Number VF6WTAG40F2452754 Ref. nr. 1367932 Hk: 180 Km: 85000 Gearbox: Automatic Gedpfxew Hkcpo Am Aobr Eurotype: 6 Diesel tank: 1 Tank liter: 200 L Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Tire Size: 205/75R17.5 Cover% left 80% 90% Front suspension: Springs Suspension rear: Springs Wheelbase: 3100 mm Hydraulic system: ? Total weight: 7500 Kg Net weight: 4675 Kg Load capacity 2825 Kg Manufacturer: Semat / Techno - AZIMUT 8 m3

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Godpfx Aezmu Hiem Ajbr Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Gbodpfx Aezmu Hcsm Ajr Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 Gbjdpfxozmu Awj Am Aor

Condition: used, Year of construction: 2010, operating hours: 10,000 h, Equipment: ABS, all wheel drive, * Atlas 1404 ZW two-way excavator * Year of manufacture: 2010 * Operating hours: 10,000 h * Hydraulic outriggers Gedszf T Uvepfx Am Ajbr * Rear view camera * More pictures and videos available via WhatsApp * Information provided without warranty and subject to prior sale.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. Gbodpfxjzlbpbs Am Aer - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm Gbodpfx Ajzlrl Tjm Aer - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal, lower, 11kW 2) horizontal, upper, 22kW (7000 rpm) 3) horizontal, lower, 5.5kW spindle diameter 40mm - spindle 1 and 3 adjustable manually, up/down, left/right - spindle 2 adjustable manually, left/right - spindle 2 adjustable electrically, up/down - spindles 2 and 3 are equipped with brakes from above: - 3 infeed rollers, pulling, toothed metal - 1 double outfeed roller, pulling, rubber from below: - pressure roller on the infeed side - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness - stepless feed rate adjustment 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the infeed table 1970mm - automatic table lubrication system - diameter of the dust extraction port 1x150mm, 2x140mm - dimensions (L/W/H) 3070x2000x1800mm - weight 2000kg ADVANTAGES – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition – used planer Net price: 115900 PLN Net price: 27590 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Manufacture: ALLOYD Gjdpsuhn Disfx Am Ajbr Tip: 4 seec Turntable

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Machine is sold on customer order. Format sliding table 3200 mm with high-quality X-roller system Electrically adjustable height adjustment, maximum cutting height 133 mm Electric bevel adjustment 90° - 45° Motor power 7.35 kW (10 hp) 3 saw blade speeds 3500/4500/5500 rpm X-Motion touch screen control Electronic positioning for saw blade height/bevel adjustment/parallel fence Tool database and automatic cutting programs Programs for grooves, groove series, rebates, and miter cuts Scoring unit, 2-axis, height/width adjustment Outrigger 1250 x 650 mm with digital angle display Rip fence 3200 mm, swiveling 90° - 45° Gsdpfx Aezp Nw Iom Ajbr Quick-Lock quick-change system for the main saw blade

Condition: excellent (used), functionality: not functional, overall weight: 180 kg, Original deep-dig bucket, 900 mm, for JCB 3/4 CX. Gbsdpfx Ajzrih Ejm Aer Delivery on a Euro pallet within Europe is possible – shipping costs available upon request.

Condition: used, mileage: 558,000 km, power: 353 kW (479.95 HP), first registration: 11/2012, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: semi-automatic, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Sobag 26T - Air suspension Suspension: Leaf-air Gbjdjy Nviyjpfx Am Asr

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Gbodpfx Amezqfxdj Aer

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Gedozqyn Tepfx Am Ajbr Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, power: 60 kW (81.58 HP), gearing type: automatic, fuel type: diesel, operation weight: 7,430 kg, first registration: 06/2005, total width: 25,500 mm,

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4 Folding Machine Machine in very good condition, ready for operation. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – Mobile delivery Infinitely variable folding speed control via inverter Cassette noise reduction Compressor included Godpfjzlgc Tox Am Ajbr Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. Made in Germany.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Godpfx Aep U Umkjm Ajbr

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, shelf height: 4,500 mm, support length: 3,600 mm, shelf length: 44,800 mm, frame height: 4,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, clear span: 3,600 mm, clearance between the columns: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment Gbsdpfx Aozp Dv Ejm Aer - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, Year of construction: 2018, operating hours: 5,394 h, Internal vehicle number: G400229 Available immediately at our location in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova CAT 323 Crawler Excavator | 22.8 t | Year 2018 | 5,394 Operating Hours We are offering a used CAT 323 crawler excavator, manufactured in 2018, for sale. With an operating weight of 22,800 kg, this machine is ideal for earthmoving, civil engineering, demolition, and general construction work. Technical specifications: Gbodpfx Ajzn D Rgem Ajr * Manufacturer/Model: CAT 323 * Vehicle type: Crawler excavator * Year: 2018 * Operating hours: 5,394 hours * Operating weight: 22,800 kg * Vehicle number: G400229 * Equipment: Quick-coupler system * Condition: Used Inspection is possible by prior appointment. Further information, photos, or videos are available upon request. Subject to errors, changes, and prior sale. We gladly accept your used vehicle as part of a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES LTD. We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2019, operating hours: 3,593 h, Equipment: all wheel drive, Internal vehicle number: MK300021 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Gsdpezn D Nvofx Am Aobr CAT M323F 4x4 Road-Rail Excavator | Year 2019 | 3,593 Operating Hours We offer for sale a used CAT M323F 4x4 road-rail excavator manufactured in 2019. Technical data: * Manufacturer/Model: CAT M323F * Vehicle type: Road-rail excavator * Year of manufacture: 2019 * Operating hours: 3,593 hours * Weight: 24,000 kg * Drive: 4x4 all-wheel drive * Quick coupler * Vehicle number: MK300021 * Condition: Used * German vehicle Inspection possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change without notice. We gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC COMMERCIAL VEHICLES GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), WEBO 4-Headed Table Multi-Spindle Drill 4×0.75 kW 200–3000 rpm Gbedpszkmfxsfx Am Ajr

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Gbsdpfxezpfg So Am Aor