Used Extractor 4 Bag for sale (59,237)

Condition: new, color: other, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 180 kg Dimensions (LxBxH): 164 x 136 x 132 cm Lifting capacity: 2.400 kg CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Condition Hnedpfx Aexn Szaebroh CE type: CE

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) Hjdsfdkb Tspfx Abrjnh - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Hnjdpfod Tbbdsx Abrjh - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Hjdpjd Tqaljfx Abrenh

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Hsdpfxsfdkb Us Abronh - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Hnedpfsguk A Hex Abreh Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Hnjdpfxofdkbhj Abreh Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. Hsdpfx Aeguk Dkobronh The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Hodpfx Asguk Dvobronh - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 12,345 km, first registration: 11/2000, Year of construction: 2000, Haller X2 .20 m3 garbage box for Cable system Container pick up Zoeller 380.00 Hedowwtigjpfx Abrjnh = Further information = Please contact Gerrit Haverhoek for more information.

Condition: used, mileage: 85,000 km, power: 132 kW (179.47 HP), first registration: 04/2016, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, Manufacturer Renault Model D 7.5 180 4x2 Semat/Techno AZIMUT 8 Skraldebil Hodpjw Hkcpsfx Abrenh Year 2016 Condition Very good Serial Number VF6WTAG40F2452754 Ref. nr. 1367932 Reg. date: Last seen: Hk: 180 Km: 85000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Tank liter: 200 L Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Tire Size: 205/75R17.5 Cover% left 80% 90% Front suspension: Springs Suspension rear: Springs Wheelbase: 3100 mm Hydraulic system: ? Total weight: 7500 Kg Net weight: 4675 Kg Load capacity 2825 Kg Manufacturer: Semat / Techno - AZIMUT 8 m3

Condition: used, mileage: 175,334 km, power: 100 kW (135.96 HP), first registration: 09/1996, fuel type: diesel, empty load weight: 7,450 kg, maximum load weight: 50 kg, overall weight: 7,500 kg, axle configuration: 4x4, wheelbase: 2,600 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, number of seats: 3, Equipment: all wheel drive, cabin, crane, differential lock, head guard, power assisted steering, trailer coupling, * German vehicle * 1 owner * only 175,334 km original mileage * Condition, see photos * Schaeff AT16 wheeled excavator type * max reach of 6.40 meters and payload of 1,300 kg with standard bucket * Digging depth with telescopic bucket 3.60 meters * Powerful and fast working movements thanks to dual circuit hydraulics * With the Schaeff Knickmatik, stepless hydraulic side adjustment of the boom axis by 925 mm left and right * Central operation of all hydraulic functions from the comfort excavator seat * 4 hydraulic supports * 1 hydraulic extension * Hydraulic system 34KW / 46 hp * Operating pressure 180 bar * Slewing range 360° * Trailer hitch * Trailer load: 24,000 kg * Trailer hydraulic connections * Towing hitch at the front * Comfort driver's spring seat * 3 seats * 8-speed manual transmission * Differential lock * Engine brake * Sunroof * Rotating beacons * Wheelbase: 2,600 mm * gross vehicle weight: 7,500 kg If a new TÜV inspection is desired, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Hnsdpfx Abowq Sxgjreh We offer and strongly recommend inspection and assessment of the goods, so that the buyer has no misconceptions about the condition and suitability. Inspection and assessment is possible at any time by appointment and is expressly desired. All details are without guarantee. We do not accept liability for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, intermediate sale and errors excepted. - .

Condition: used, mileage: 175,334 km, power: 100 kW (135.96 HP), gearing type: mechanical, fuel type: diesel, color: green, overall weight: 7,500 kg, empty load weight: 7,450 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 3, first registration: 09/1996, emission class: none, brakes: engine braking, suspension: steel, Year of construction: 1996, driver cabin: day cab, wheelbase: 2,600 mm, Equipment: all wheel drive, cabin, crane, differential lock, head guard, power assisted steering, trailer coupling, * German vehicle * 1st hand * Only 175,334 km original * Condition, see photos * Schaeff telescopic excavator type AT16 * With the Schaeff Knickmatik, the hydraulic, stepless side adjustment of the boom axis by 925 mm each to the left and right * Central control of all hydraulic functions from the comfort excavator seat * Powerful and fast working movements thanks to dual-circuit hydraulics * Max reach of 6.40 meters and payload of 1,300 kg with standard bucket * Digging depth with telescopic bucket 3.60 meters * Slewing range 360° * Operating pressure 180 bar * Hydraulic system 34kW / 46 hp Hnedpswq Sxmefx Abroh * 1 hydraulic extension * 4 hydraulic supports * Trailer hitch * Trailer hydraulic connections * Permitted trailer load: 24,000 kg * 3 seats * Differential lock * Sunroof * Comfort driver suspension seat * Engine brake * Rotating beacon lights * Towing coupling in front * 8-speed manual transmission * GVWR: 7,500 kg * Wheelbase: 2,600 mm If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods so that the buyer does not get a false impression of the condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly welcome. All information is without guarantee. No liability is accepted for errors or incorrect details in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Hjdpfxowg E Uts Abronh

Condition: used, mileage: 192,000 km, power: 265 kW (360.30 HP), first registration: 11/2005, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, color: red, gearing type: semi-automatic, emission class: euro3, loading space volume: 8 m³, Equipment: ABS, air conditioning, MERCEDES BENZ 3336/6x4/ RSP suction excavator German vehicle 1 owner original paint 33 ton 6x4 Air conditioning Hnsdpsxfm Shsfx Abrjh Steel suspension etc....

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned. Hsdpfx Abjnt Uc Rorenh

Condition: used, Year of construction: 2012, operating hours: 15,000 h, LIEBHERR R 964 C – ONE OWNER – EXCELLENT CONDITION – BACKHOE EXCAVATOR ----VEHICLE HISTORY ONE OWNER GERMAN MACHINE ----VEHICLE FEATURES ----BRAND LIEBHERR ----TYPE TRACKED EXCAVATOR BACKHOE EXCAVATOR ----YEAR OF MANUFACTURE 2012 ----OPERATING HOURS 15,000 h ----POWER 320 kW ----ENGINE Hedpfx Abjw Ua Trerjnh LIEBHERR ENGINE ----MAINTENANCE SERVICED EXCLUSIVELY BY LIEBHERR ----AVAILABLE IMMEDIATELY ----EXPORT SALES ONLY WITH DEPOSIT (SECURITY) OF AT LEAST €500–€2,000 ----EXPORT DECLARATION/CUSTOMS—EXW AVAILABLE IN 10 MINUTES (AUTHORIZED EXPORTER); 5-DAY, 30-DAY PLATES AND 17–21 DAYS FOR AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least €500/€1,000 is required for sales to the EU and third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00/€1,000.00 will be levied.) Subject to changes, errors, and prior sale! You will find more vehicles on our website. Sales are made exclusively according to our Terms and Conditions — see website. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some originate from transmission errors between the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer as defined by §145 BGB. Instead, it is provided for the initiation of a contract. The information provided here is without guarantee and therefore does not represent warranted characteristics.

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA rail-road excavator is a versatile excavator, equipped with a quick coupler and a reliable Deutz engine. The excavator was built in 2013 and has 11,920 operating hours. The machine offers an engine power of 95 kW (129 hp) and a displacement of 4,038 cc. It has a spacious double cabin with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on trams thanks to its narrow axles and special support. Other features include an Eberspächer fuel heater, a CWF600 soot particle filter and a rear view camera with monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. The excavator is also equipped with a wagon braking system that can be controlled from the cabin, as well as an electronic stroke limiter for fine-tuning the lifting and working cylinders. The machine has various loading options and is offered with a comprehensive maintenance record (service booklet). Inspections are possible during the stated opening hours without prior appointment. Hnodpfxsr Uzazs Abrsh Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 2008, operating hours: 7,643 h, ----Construction: Komatsu SAA4D107E-3 engine, 4-cylinder, ROPS cab, outrigger blade approximately 2.55 m wide, adjustable boom, axle support, quick coupler, additional piping, 3 drive modes (data according to brochure) Hnjdpfx Abjwlmiiorjh Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see Legal Notice).

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Hnjdpfxsl Dw Nxj Abreh long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Hjdpfxscw Dg Dj Abrsnh Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes x 5000 mm y 1350 mm z 450 mm Hnjdpfxsig T Epj Abrsh a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train - Power: 110-1250 kW Hnodpfxewgym Dj Abreh - Year of manufacture: 2011 - Design: ZM

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES. Hjdpjxwnw Ajfx Abrenh

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), fuel type: diesel, fuel tank capacity: 14 l, color: orange, overall weight: 1,400 kg, emission class: euro5, shovel volume: 0.03 m³, Year of construction: 2025, operating hours: 1 h, Equipment: pallet forks, rubber tracks, standard shovel, Mini Excavator VIP14 on Rubber Tracks The modern mini excavator VIP14 is a professional and durable machine. The VIP14 model is the ideal machine for demanding construction, electrical, plumbing, renovation companies as well as service providers in similar sectors. The VIP14 is also equipped with a swing arm, which makes work on tight construction sites significantly easier. We also offer reliable customer service after the purchase. The mini excavators are manufactured under the supervision of European technicians. The machine is built on a robust frame and can be used under all conditions. TECHNICAL DATA: Model: VIP14 Own weight: 1400 kg Bucket volume (3 buckets in set): 0.04 m³ Engine: LAIDONG Engine power: 18.8 kW Number of cylinders: 3 Oil cooler: YES Swing arm: YES Extendable tracks: NO Max. climbing ability: 58 % Pump type: gear pump Hydraulic pressure: 20 MPa Hydraulic flow: 36 l/min Max. travel speed: 2.5 km/h Platform rotation speed: 12–13 rpm Bucket digging force: 16 kN Arm digging force: 12.5 kN Ground pressure: 23 kPa Fuel tank: 14.5 l Hydraulic tank: 15 l Engine oil volume: 3.2 l Support rollers (per side): 3 DIMENSIONS: Length: 3319 mm Width: 1100 mm Height: 2292 mm Blade width: 1100 mm Blade height: 220 mm Track contact surface: 1190 mm Track width: 230 mm Ground clearance: 380 mm Bucket width (standard): 400 mm Total track length: 1503 mm Track model: 230x72x45 WORKING AREA: Hnodpovznl Esfx Abrsh Max. digging depth: 2258 / 2495 mm (with quick coupler) Max. digging radius: 3417 mm Max. digging height: 2840 mm FEATURES AND ADVANTAGES OF THE PRODUCT - Special design to separate engine compartment and cooling system, and reinforced fan for improved cooling efficiency - Hydraulic components from renowned brands for stable and reliable performance - Dual fuel filter ensures high fuel purity and effective engine protection - Extended hydraulic system enables connection of various attachments - Comfortable operator cabin with wide, clear field of view facilitates work - Korean joystick for precise and pleasant control Versatile applications: gardening, orchards, agriculture, basement renovations, waste transport in coal processing plants, paper industry, etc. – replaces the work of 4–5 people PRICE: €11,008.4 net €13,100 gross