Used Fart Resinblock 2000 for sale (7,238)

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5217, used, in good condition, fully functional, scope of delivery as per photos. Iedpox Eq H Esfx Abvoth

Condition: ready for operation (used), Dittel BM 2000 Balance – Measuring device SN:239-5228, used, in good condition, fully functional, scope of delivery as per photos Isdpfx Abex Eq Icsvsth

Condition: ready for operation (used), HOLZ-HER / ELTE PE5.14 / 2 motor spindle SN:27.95 + Heuco PS 2000-E , the interference suppression capacitor is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Iodpfxorrqrre Abveth

Condition: ready for operation (used), Fanuc A06B-0268-B000 AC Servo Motor, hole spacing of the mounting holes: 141 x 141 mm, Ø drive shaft: 27-32 mm, with pulse encoder A860-2000-T301, used, good condition, 100% functional Itjdpfoi D H Apox Abvoh

Condition: new, Fanuc A06B-0269-B400 AC Servo Motor + A860-2000-T301 Pulse Decoder SN: 6250, unused in opened original packaging, 100% functional, scope of delivery as per photos Ijdpfxjm Nx Nls Abveth

Condition: new, Fanuc A06B-0245-B100 servo motor SN C02XB5696 + A860-2000-T301, unused in opened original packaging, 100% functional, scope of delivery as per photos Itedpfxoq E Dqke Abvsh

Condition: ready for operation (used), Fanuc A06B-0215-B700 AC Servo Motor SN:C06ZF0779 + A860-2000-T321 used, in good condition, 100% functional, delivery as per photos. Isdex Dt Aqepfx Abvjth

Condition: ready for operation (used), Fanuc A06B-0216-B400 AC servomotor, serial number: C162F1DEE + encoder A860-2000-T301, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itodpfex Dt Dnox Abveh

Condition: ready for operation (used), Fanuc A06B-0236-B100 AC servo motor SN: C03XD5286 with A860-2000-T301 pulsecoder SN: 161358030924, used, in good condition, fully functional, scope of delivery as per photos. Itjdsx Dt Elopfx Abvoh

Condition: new, Fanuc A06B-0225-B000 AC Servo Motor + A860-2000-T301 Pulse Decoder SN: 9435, unused, 100% functional, scope of delivery as per photos Ijdpjm Nx Ndjfx Abveth

Condition: ready for operation (used), Fanuc A860-2000-X021 Pulsecoder, used, in good condition, 100% operational, scope of delivery as per photos. Itedpox Dt Tpjfx Abvoh

Condition: ready for operation (used), Fanuc Model L50/2000 Motor Spec. A06B-0572-B077 Servo Motor Serial Number: CS72G0835, used, good condition, 100% functional, scope of delivery as per photos Itedpfx Ajuhi H Sjbvsh

Condition: ready for operation (used), Fanuc A06B-0215-B700 # 0100 Servo Motor SN: C044F1730 + A860-2000-T321 Pulsecoder, used, good condition, fully functional, scope of delivery as shown in the photos. Itedex Ip E Eopfx Abveh

Condition: ready for operation (used), Fanuc A06B-0247-B805 servo motor SN C05YA3070 + A860-2000-T301, used, good condition, 100% functional, scope of delivery as per photos Itodpeq E Dqrefx Abveh

Condition: ready for operation (used), Fanuc A06B-0218-B200 AC servo motor SN: C148F2F0D with A860-2000-T301 pulse coder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itodpfx Asy Nn T Robvjh

Condition: ready for operation (used), Fanuc A06B-2063-B003 AC servo motor, serial number: C202F2BCE, with pulse encoder A860-2000-X021, pulse encoder serial number: (not specified), used, in good condition, 100% functional, scope of supply as shown in the photos. Iedpfjy U Tlvox Abveth

Condition: ready for operation (used), Fanuc A06B-0266-B100 AC servo motor SN: C03XA7279 with A860-2000-T301 pulsecoder SN:161630030924, used, in good condition, 100% functional, delivery as per photos. Itedpfx Abjy Nn Uhjveh

Condition: ready for operation (used), Fanuc A06B-0225-B000 AC servo motor SN: C049X7373 + A860-2000-T301 pulsecoder SN: 312253, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the pictures. Itsdpfex Dt Duox Abvsh

Condition: new, functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 5,250 kg, empty load weight: 5,250 kg, operation weight: 5,250 kg, maximum load weight: 2,000 kg, lifting power: 2 kg/m, lifting height: 4,500 mm, tire size: 16 / 70-20, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.8 m³, Year of construction: 2024, load capacity: 2,000 kg, Equipment: additional headlights, cabin, hydraulics, GUNTER GROSSMANN GG TELE 2000 New high quality telescopic loader Description Loading weight: 2000 kg Bucket capacity: 0.8 Min. Turning radius: 4600 mm Lifting height: 4500 mm Lifting speed: ≤5.0 s Driving mode: full hydraulic drive on four wheels; Transmission gearbox: hydraulic variable with 2 speeds Total weight: 5250 kg Dimension (L * W * H): 5800 * 2000 * 2750 mm Quick change :yes Includes: Hydraulic Joystick + Quick Coupling + Bucket SPECIFICATIONS Engine: Luotuo Cab: Luxury Itodeu Dcgmjpfx Abvoh Adjustable steering wheel: yes Tire size: 16 / 70-20 Timer: Yes Work lights: Yes -LED Reverse camera: Yes Total weight of the machine: 5250 kg Loading weight: 2000kg MAIN DIMENSIONS Dimension (L * W * H) 5800 * 2000 * 2750 mm OPERATING RANGE The height of: 4,5m Rated: speeds 2400 obr./min Maximum: Bucket pull-out force, lifting cylinder 60KN Drive: Four-wheel drive Maximum speed: 22 km / h Braking mode hydraulic: four-wheel disc brake Lifetime: ≤5.0 s

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Itedpfjzc D Enex Abvjh Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC-Steuerung Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Itsdpfezc Dzpjx Abveh Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018), all overhauled by B&LOverhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors Itedpfx Asx D D Ikobveh • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Iedszcwt Sepfx Abveth Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: used, Year of construction: 2000, Overview This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data Manufacturer: Bohrer Maschinenbau Model / Type: R40 Machine Type: Crate washing machine Year of Manufacture: 2000 Origin: Regenstauf, Germany Application: Washing / cleaning of beverage crates Construction: Stainless steel housing and machine frame Conveyor System: Integrated crate transport / conveyor sections Washing Area: Enclosed washing chamber with splash protection Fluid Handling: Stainless steel collection basin and drainage system Access: Stainless steel stairs and maintenance walkway with grating Control System: Integrated operator panel with push-buttons and indicator lights Electrical Supply: 400 V Frequency: 50 Hz Connected Load: 26 kVA Iedpfxszb A E Ds Abvjth

Condition: used, Year of construction: 2000, Overview This Kettner Robot 3A palletizing system is designed for the automatic palletizing of shrink packs and PET bottle packs onto Euro pallets. The system is currently configured for 6-pack shrink packs with 0.5 l PET bottles, arranged with 36 packs per machine can process several formats, including 0.5 l one-way PET, 0.5 l returnable PET and 1.5 l one-way PET. The system consists of a blue Kettner robot / palletizing column, mechanical layer transfer head, infeed conveyors for shrink packs, pallet roller conveyors, pallet lifting / palletizing station and protective safety fencing. The output is set as a maximum performance of up to 68 pallets/hour. The palletizing area is fully enclosed by wire-mesh safety fencing with access gates, warning lights and operator controls. The system is suitable for high-speed end-of-line palletizing in beverage production. Technical Data Manufacturer: Kettner / Krones Group Model / Type: Kettner Robot 3A Machine Type: Robotic palletizer / layer palletizing system Application: Palletizing of shrink packs / PET bottle packs Formats: 0.5 l one-way PET, 0.5 l returnable PET, 1.5 l one-way PET Pallet Type: Euro pallet Pallet Dimensions: 1200 x 800 x 144 mm Maximum Output: up to approx. 68 pallets/hour Control / HMI: MTS 10 operator panel Handling System: Mechanical layer transfer head / palletizing robot Product Infeed: Slat-chain conveyor for shrink packs Pallet Handling: Pallet roller conveyor and palletizing / lifting station Condition: Used, installed in industrial beverage packaging environment Itjdpfxezb Ayze Abvoh