Used Fast Radial for sale (3,964)

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder throat 1000 mm quill stroke 280 mm drive power 3 kw Laodem Sg R Dspfx Abnjc spindle speed 22 - 2000 rpm Weight 2 to

Condition: good (used), Breda radial drilling machine Type R 1220 MP Laedox Rt Ezopfx Abnjc 400 Volt, 3 kW Spindle taper MK 5 Arm length 1250 mm Speed 30–1200 rpm with swiveling table

Condition: good (used), Year of construction: 1964, Radial drilling machine make Raboma 12 UH 1600 MK with Morse taper mount, cube table, and many accessories Laedpfxjxcf Hfe Abnec

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Laodpfxjx Hgkvo Abnjc Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle mount MT 5 Throat 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping Lajdpotwzk Dofx Abnec • Feed • Right-to-left travel • Motorized up and down travel • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t Laedpfx Ajl Ha Twsbnec - Serial-No.: A01/446/97 - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Condition: new, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Speed range ----- (8) 100 ~ 1600 rpm Spindle stroke ----- 135 mm Unload ----- 300 ~ 720 mm Spindle intake ----- MK3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/omw Cube table----- 250 x 250 x 250 mm Column diameter ----- 150 mm Foot ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 KW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDING Laedpfeq E Izmsx Abnoc * Cooling system * CE plug * SCHNEIDER electrics OPTION * Floor cabinet

Condition: used, Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter) 80 mm Arm reach 2000 mm Workpiece height - approx. 1300 mm Boring diameter in steel 100 mm Boring diameter in cast iron 115 mm Thread cutting in ST 60 M 68 mm Spindle speeds 16 - 1250 rpm Number of spindle speeds 32 Spindle stroke 550 mm Number of feeds 18 Feed range 0.06 - 3.0 mm/rev Distance spindle/baseplate 480 to 1800 mm Column diameter 500 mm Spindle motor 11 kW Lifting motor 4 kW Total power requirement 15 kW Machine weight approx. 8,500 kg Lajdpsy H Dausfx Abnec Footprint 3200 x 1250 x 3600 mm with work table 1500 x 1000 x 500 mm

Condition: new, Year of construction: 2024, Radial Band Saw Ledpfxsmbbive Abnjac

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Lsdpswa Tc Sjfx Abnsac Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: new, Year of construction: 2022, functionality: fully functional, The tool holder is completely new and still in its original packaging. There is a second one, which is used but shows no signs of wear. (see picture) Spindle MTSK-40 Gear ratio 1:1 Max rpm. 6000 Maximum torque [Nm] 50 External cooling Yes Internal cooling Yes Ledpfxjuzwuto Abnsac Internal cooling P=30 BAR The holder can also be used for the following CMZ machines. CMZ - TA15M/Y/MS/MY/YS 15 PCS. CMZ - TX52 Y2 QUATTRO CMZ - TX52 Y2 TWIN CMZ - TX66 Y2 QUATTRO CMZ - TX66 Y2 TWIN CMZ - TX66 Y3 CMZ - TA20M/Y/MS/MY/YS 15 PCS. CMZ - TA25M/Y/MS/MY/YS 15 PCS. CMZ - TA30M/Y/MS/MY/YS 15 PCS. CMZ - TTL 52 CMZ - TTL 66 CMZ - TX52 Y3

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Lasdpfsy Ia Azjx Abnoc Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm Lsdpfovylh Uex Abnsac

Condition: good (used), height of centers: 220 mm center distance: 1000 mm max. circulation-Ø over bed: 440 mm spindle boring: 52 mm spindle retainer: Gr. 6 mm retainer taper tailstock: 4 MK spindle speed: 37,5 - 3000 Upm forwarding feed: 7500 mm/U thread pitch: electrical connection: 400 V kW space needed: 2800 x 1480 x 1570 mm Lodpfx Abed Scafsneac weight: 2150 kg

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 2500 x 2200 x 1900 mm Lsdpjg A Inwsfx Abnsac weight: 3000 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm Lasdjyxw Ddjpfx Abnjc • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Year of construction: 2020, condition: good (used), Fan, ventilator, electric motor, blower, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan -Type: R3G250-RK55-05 -Voltage: 48 VDC -Speed: 2250 rpm -Power: 105 W Lodpexn Nukofx Abnsac -Number: 2x fans available -Price: per piece -Dimensions: 250/105/H265 mm -Weight: 2.1 kg

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction -Manufacturer: ebmpapst, Radial fan type R2E133-BH66-34 -Voltage: 230 V -Speed: 2700 rpm -Power: 25 W -Dimensions: Ø 134 x 90 mm Laodpfoyu Nk Hex Abnsc -Weight: 0.6 kg

Condition: good (used), volume flow: 3.69 m³/h, power: 30 kW (40.79 HP), For sale is a tested radial fan from Pollrich, equipped with suction air control and a Siemens electric motor. Technical data: • Manufacturer: Pollrich • Motor: Siemens 30 kW Ljdpfoy El Iwox Abnjac • Airflow: 3.69 m³/s • Pressure: 4800 Pa • Speed: 3277 rpm • Max. speed: 3340 rpm • Medium temperature: up to 60 °C The blower is mounted on a sturdy base frame and is suitable for industrial extraction, conveying air, or process air applications. Condition: used, tested Voltage: 3 x 400 Volts Speed: 2940 rpm

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve included as an image!! Volume flow: 46308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Lasdpfx Abjd Nqlconec Motor: VEM 415 S4 Power: 110 kW

Year of construction: 2026, condition: new, Cutting height 195 mm saw-blade dia. 550 mm Ljdpfxoyk Iaxo Abnsac Motor output 5,5 kW

Year of construction: 2026, condition: new, Cutting height 195 mm saw-blade dia. 550 mm Motor output 5,5 kW Lajdpfx Aeyk Ialjbnoc

Year of construction: 2026, condition: new, Cutting height 60 mm saw-blade dia. 350 mm Laodpfx Aeyk Ia Esbnec Motor output 5,2 kW

Year of construction: 2026, condition: new, Cutting height 195 mm saw-blade dia. 550 mm Laodpfx Aoyk Iarebnoc Motor output 5,5 kW

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Laedpfx Ajytb Eyebnjc Year of manufacture: 1995