Used Feed Rollers for sale (20,151)

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A Kdsdewrrp Uopfx Aa Rew -Dimensions: 660/390/H350 mm -Weight: 23 kg

Condition: used, Triangular belt sander Kodpjulxhzefx Aa Rsdw

Condition: used, Year of construction: 1986, operating hours: 10,421 h, machine/vehicle number: L087, 026/0001 Engine number: 702 0393 Type: F5L 912 If interested, please contact Mr. Berger by email. Kodpfx Aswrmqgsa Rsdw

Condition: excellent (used), Year of construction: 2016, 1 Up-stroke angle cross- cutting saw model UKA 600 with pneumatic stroke and clamping device Kdodsxivhaepfx Aa Rjw Saw unit mounted on rotating table of diameter : 980 mm Saw blade diameter : 600 mm Cutting capacity : 165 x 240 mm 90 degrees Maximum cutting height : 165 mm at the Fence and 175 mm Diameter (at 90 degrees) for round material Cutting angles : 30 – 90 – 30 degrees 45 – 90 – 45 degrees with automatic function Motor power : 5.5 Kw Voltage : 400 Volt 50 Hz Working height : 920 mm 1 Tiger Stop 7.5 Automatic Stop and pusher Total length : 7.95 meter Working length : 7.35 meter Net working length (automatic saw) : 6 meter Voltage : 220 Volt 50 Hz Motor power : 0,45 Kw Feed speed : maximum 40 m/min (Depends on load) Précision : +/- 0,4 mm as pusher. Infeed-table for TigerStop 6.8 Total length : 7.4 meters Table width : 325 mm 1 Outfeed / infeed table with side fence Length : 3.7 meter Width : 325 mm Right side pusher version (video for explanation purposes only) The machine is operated by push button for semi-automatic use or fully automatic for 90 degree angles controlled by the TigerStop. The rotation table is controlled by a Tigerstop Servo drive TigerDrive

Condition: used, Year of construction: 1995, functionality: fully functional, For sale: Hundegger P10 machine, in continuous use. The machine was purchased used, directly from the manufacturer in Germany. Ready for further operation. Possibility to inspect the machine live during operation. Ksdpfx Aexlla Doa Rodw

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-Roll Mechanical Plate Rolling Machine. Available for immediate delivery unless previously sold. Model: FX4.90.1330. Double pre-bending. Working width: 1330 mm. Top and bottom roll diameter: 90 mm. Lateral roll diameter: 95 mm. Plate thickness capacity: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Top and bottom rolls are motorized with identical power output. Side rolls are motorized for vertical movement (up/down). Front opening for the top roll. Rolls are induction hardened to HRC 55/60, 2 mm depth. Special bearings for the side rolls. External lever for roll tilt adjustment. Sheet clamping with bearing-equipped device. 2-pedal foot control. Electrical cabinet compliant with CE regulations. Millimeter scale for sheet clamping readout. 4-ROLL MECHANICAL PLATE ROLLING MACHINE with complete double pre-bending and front-release system. The top roll is stationary, while the lifting/lowering movement is applied to the side and lower rolls. Sheet clamping is simple: after inserting the sheet between the top and bottom rolls, the bottom roll lifts to secure the sheet. Power: 1.8 kW Dimensions (mm): 800 x 2100 x H 1300 Weight: 625 kg Machine includes: - Front conical bending device on the top roll. - 2 digital readouts for side roll positions. - Roll grinding/turning after hardening treatment. - Roll hardening. Ksdpfx Ajfh Skpsa Rsdw

Condition: good (used), Year of construction: 2010, machine/vehicle number: F3554, Offer 25228 Hydraulic Horizontal – Two-column Guided Mitre Band Saw Machine Technical Data: - Automatic operation cycle for cutting process, hydraulic lifting/lowering of the saw frame, hydraulic automatic material feed - Saw blade dimensions: 4400 x 34 x 0.9 mm - Infinitely variable cutting speed: 15 – 88 m/min Kdjdpfx Aewvrvioa Rew - Infinitely variable cutting pressure adjustment: 10 – 15 bar - Lowering speed: 0 – 300 m/min - Cutting range 90°: - Round at 90°: 360 mm - Square-flat: 360 x 430 mm - Hydraulic material clamping - Hydraulic automatic material feed - Coolant system - Drive: 400 V / 3 kW - Space requirement approx.: W 2200 x H 1850 x D 1300 mm - Weight approx.: 1100 kg - Roller table: 2000 mm

Condition: used, functionality: fully functional, Cross-through cut-off saw, Bäuerle brand, new electrics with impulse transmitter automation. Triple cut, adjustable, length up to 6.30 m. Price 3000 EUR ex works. Kjdexd Tduopfx Aa Redw

Condition: used, Feed unit WGOMA VS 34 – used – including stand ----- Technical data ----- Rollers: 3 pieces, Number of speeds: 4 Kodpfx Aajw Nv N Sj Redw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter ProfiPress 2500 3HF LZ Year of production: 2009 Technical condition: very good Weinig Dimter ProfiPress 2500 3HF LZ is a high frequency wood gluing press designed for the production of laminated panels and high-strength wooden components. The machine is engineered for efficient and precise length and width bonding using high-frequency (HF) technology. Key Features and Benefits: Kedpevyu Iqofx Aa Redw ✅ High-Frequency (HF) Technology – ensures rapid glue curing, reducing pressing time and increasing production efficiency. ✅ Robust Construction – made from high-quality components, ensuring durability and reliability. ✅ Automated Process – can be integrated into production lines for optimized workflow and enhanced efficiency. ✅ Precise Pressure Adjustment – guarantees uniform quality of the finished product. ✅ Versatility – ideal for manufacturing laminated panels, structural beams, stair treads, countertops, and other wooden elements. Technical Specifications: • Maximum Pressing Length: 2500 mm • Pressing Technology: High-Frequency (HF) • Number of Pressure Sections: 3HF (three high-frequency sections) • Pressure System: Hydraulic with precise pressure control • Application: Wide and long gluing • Glue Type: Hot-melt adhesives (e.g., PVAc, PU) compatible with HF technology • Control Options: User-friendly interface and automated gluing cycle programming • Energy Consumption: Efficient power usage for intensive production • Safety System: Sensors and protective covers compliant with CE standards Dimensions of Processed Wood: • Wood width, uniform widths for filling: 30 - 150 mm, usually 120 mm • Wood thickness: 7 - 45 mm, usually 24 mm • Wood length (min./max.): 200 - 2400 mm, usually 1250 mm When using certain additional devices, the minimum wood length must be adjusted accordingly, or a guide system must be used. Specific Pressing Pressure: 18 - 160 kN Type of Wood: Softwood / Hardwood Air Supply Data: • R1" / 1/2" - height approx. 600 mm - oil-free • Airflow: approx. 500 Nl/min (press / glue application) • Dust extraction: approx. 8 bar (extraction system) Electrical Connection Data: • (1) Press, mechanism → 14 kW • (1) High-Frequency Generator (HF) → 42 kW • Power supply voltage: 400V / 50Hz • Weight of the press: 7000 kg (position 5) • Cable channel 300 x 150 mm, recessed in the floor or flush-mounted, with a control cabinet integrated into the machine structure. Foundation: • Concrete slab covering the entire delivery area, minimum thickness 200 mm, compacted and reinforced from both top and bottom. • Static load of the press → see the diagram on the left. • Maximum static load per foot: approx. 150 N/cm² • Any foundation recesses, elevations, or reinforcements must be provided by the customer. • This also applies to platforms, stairs, walkways, and supply lines for pneumatics, electricity, and telephone systems. Working height (AH): 940 mm Weinig Dimter ProfiPress 2500 3HF LZ is a professional solution for manufacturing plants looking for an efficient and precise wood gluing machine. Thanks to HF technology, it significantly reduces the production cycle time while improving the quality of finished products. We also offer professional disassembly, installation, commissioning, employee training on machine operation, and service support.

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Kdsdpfsxd Ruwjx Aa Rjw Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Kdodpfxjww Tzio Aa Rsw

Condition: used, machine/vehicle number: 40530, On offer is a used Meuser M0L or MOL lathe lead screw lathe with lots of tools, accessories and a tool cabinet, see photos. Manufacturer: Meuser Type: M0L or MOL Machine-No.: 40530 Center height: 205 mm Center width: 1000 mm Spindle bore: 47 mm Spindle speed: 28 - 1250 rpm Bed width: 320 mm Total power requirement: 5.5 kW Machine dimensions L x W x H: 2.30 x 1.10 x 1.25 m Weight: approx. 1200 kg + tool cabinet approx. 500 kg Accessories: - Multifix quick-change turning tool holder Kodpju Et Hyofx Aa Redw - 2x chuck - 1x steady rest - 1x tool cabinet with lots of turning tools etc. The price is net, plus VAT, ex works free loading.

Condition: used, Lot (30 pieces) of various milling cutters (mostly Leitz) for MAN feed, many in like-new condition. Kdsdpfxew Nym Io Aa Rjw mark: BG test or MAN drilling: 30 or 40 mm

Condition: used, Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Baujahr / Year 2003 - Serial-No. 211826 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 400V - 50 Hz Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Kdsdsw Ngnxepfx Aa Row On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2005, condition: used, Apple engineering MM975 Kodpfeb Ucqlox Aa Rodw Mini Force Feed Depositor Stainless mobile height adjustable single head pneumatic depositor with variable speed scroll feeder in hopper for positive product feeding

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Kodpfx Aaehxvu Eo Rjdw Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: good (used), Complete feed of gang saw Esterer HDN 600 Ksdpfxor Hmhne Aa Rodw was recently removed due to conversion to frequency-controlled feed. immediately available Location: Austria, near Wels

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Ksdpfxodzqmze Aa Redw Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm Kdodpfx Aasuzn Nno Rjw - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Kedpfx Asfx Hyfja Rsdw Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm Kdedpfxodzqlte Aa Rjw - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Double column eccentric punching press BLEMA Gotha type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine no. No. 88151005 Year of construction 1988 / 92 Pressure force 160 ton. Frame width 970 mm Stand width sideways 560 mm Table size 900 x 900 mm ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/min. Belt width in roller feed max. 400 mm Motor power approx. 15 kW Kdsdpfx Aaedzqlvj Rjw Mains connection 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - ram weight compensation cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch/brake combination - Central oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Press and feed control cabinets, together on one platform, adjacent Platform dimensions 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed 2100 mm Depth of the press with drive motor 2300 mm Overall height of the press 4150 mm Weight of punching press approx. 18 tons. For transportation, the drive motor is removed and the machine is placed on its face. In addition: NC roll feed straightening machine ALBA type GGVHY400 Apparatus no. 1405 and 1406, order no. 910708 (year of manufacture 1992) - ALBA PSS 300 feed control - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Belt thickness at 400 mm width max. 3 mm - Belt thickness for 300 mm width max. 4 mm - Belt cross-section max. 1200 mm2 - Roller drive hydraulically controlled by the feed - Height-adjustable feed unit on the press to adjust the material infeed height - Hydraulic unit opposite - Drag straightener with hydraulic opening and closing Weight of the complete system approx. 24 tons Space required for transport a mega trailer with an internal height of 3 meters and a loading length of 13.6 meters good condition

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Kdodpsh D Syvefx Aa Row Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, Heavy-duty roller conveyor with steel support rollers Year of manufacture: approx. 2000 Roller conveyor length: 4950 mm Usable width = roller width: 485 mm Total conveyor width: 580 mm Conveyor height: 950 mm Kdodpew E Nwpsfx Aa Rew Number of rollers: 7 pcs Roller pitch: 850 to 620 mm (center to center) Roller diameter: Ø 90 mm Axle diameter: Ø 20 mm - Very robust construction made of angle steel 130 x 65 x 8 mm Transport dimensions: length 4950 mm, width 580 mm, height: 950 mm Net weight: 360 kg In good condition