Used Feed Rollers for sale (19,645)

Condition: good (used), Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates Hnodpfoxrk T Nox Ahysg -Outer diameter: Ø 200 mm -Bolt circle: Ø134 mm -Socket: Short cone 6, cone Ø 101 - 106 mm -Overall dimensions: Ø 200 x 145 mm -Weight: 7.6 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1979, DEMAG fine travel drive, consisting of: DEMAG motor KBA 140 B 4, 8.8 kW, 1,440 rpm; DEMAG motor KBA 80 B 4, 1.4 kW, 1,340 rpm; DEMAG gearbox EGO 8 B 3 I = 9.9 Hedpfx Ajw Ulirjhyeng

Condition: excellent (used), CATALOG NO. 6916 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - 2 sanding units: Upper: steel roller + pad + steel roller Lower: steel roller + pad + steel roller From above: - Pressure roller, steel - Sanding unit - Sliding pressure roller, steel - Cleaning brush - Feed belt From below: - Feed belt - 2 smooth sliding steel rollers - Sanding unit - Pressure roller, steel - Cleaning brush - Discharge roller - Electrically adjustable sanding height - Pneumatic oscillation of sanding belts - Infinitely variable feed speed regulation - Feed motor: 0.55 kW - Main motors: 2 x 4 kW - Air requirement: 6-8 bar Hjdpfx Ahex Swtxeysng - Extraction ports diameter: 3 x 80 mm, 1 x 120 mm - Overall dimensions (L/W/H): 1800 x 2070 x 2000 mm - Weight: 1422 kg – German manufacture, – unpainted – Very good condition, – used sander Net price: 25,900 PLN Net price: 6,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), The SYNCHRO-TAPPER is a fully electric thread cutting unit. Its performance ranges from M2 to M10 in steel, with a speed range from 220 to 1750 rpm. The device works according to the lead screw principle, i.e. it can be converted at any time to a thread pitch between 0.25 and 2 mm by replacing two interchangeable wheels, which corresponds to thread sizes from M1 to M14. Hodjw N E R Eepfx Ahyeng This solution is much faster and more cost-effective than changing a lead cartridge. In one operation, rapid advance, thread cutting and rapid return are performed automatically. The unit can be mounted in any position and can also be retrofitted with a multi-spindle head. Thread cutting unit with lead screw Max. feed length: 80 mm With UC-21U control unit Very good condition

Condition: good (used), Year of construction: 1995, 1 used center lathe Make MCM Type TC 300 x 2000 Year of manufacture 1995 Technical specifications: Center height 300 mm Turning diameter 600 mm Center distance 3000 mm Bed width 400 mm Spindle bore 82 mm Spindle nose Spindle speeds (24) 9 - 1600 rpm Motor power 7.5 kW (option: 9.2 kW) Z-axis feed X-axis feed Metric thread Witworth thread Module thread Diametric pitch thread Cross slide LxW 660 x 230 mm Cross slide stroke 340 mm Top slide LxW 350 x 150 mm Top slide stroke 150 mm Tailstock taper MK 5 Equipped with Three- and four-jaw chuck Multifix head with various inserts Chip tray Steady rest Hnodevzllcspfx Ahyjg Technical specifications. Errors excepted. This machine comes from a company that exclusively processed plastic and is in excellent condition.

Condition: used, Technical details: Hnsdpfx Ahou Iczfoyog plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation On sale as described. *

Condition: good (used), Multi-spindle head, multi-spindle drill head, drilling gearbox, feed drill -Manufacturer: Desoutter, AFD - AUTOMATIC FEED DRILLS AND THREADING TILLS -Type: AFDE-40 -Speed: 3800 rpm -Multi-spindle head: Desoutter type 174183, spacing 10 to 67 mm -Motor: ABB 0.33 kW Hnedpjra Rntefx Ahyeg -Built-in collets: Ø 3 mm -Quantity: 1 piece available -Dimensions: 890/220/H150 mm -Weight: 12 kg

Condition: new, Year of construction: 2026, Feed with uniform speed without loss of strength Metal gearbox with hardened gears Metal cover of the feed rollers Right - and left-hand rotation Powerful motor Durable PU feed rollers Tripod with an extended arm as standard Individual tilt and adjustable for horizontal and vertical use With counter Model VSA 48 L Item No. 5115500 Technical data maximum unloading 1050 mm Number 4 feed rollers Roll diameter 120 mm Roll width 60 mm Travel of the roll 25 mm 8-speed Circulator Speeds 2 / 4 / 5.5 / 6.7 / 11 / 13 / 16,5 / 33 m / min. Motor output 0,75 kW Connection 400 V / 50 Hz Hnsdpfxocnxmze Ahysg Weight 65 kg

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Hnsdpox Rqr Ssfx Ahysg Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, Year of construction: 2017, 1x Mixer Holding Tank / Storage Container Hnedpfxextmxwo Ahyeg - Custom-made from V4A stainless steel - Used in our pellet production line as a buffer tank for herbal mixtures in powder form. It features a feed line (right side) from the mixer and a discharge on the left side to the intermediate storage tank. At the inlet from the mixer, there is also an option to divert the mixture into big bags prior to storage. - Material feed via electric auger (top) - Material discharge via electric auger (angled) Filling capacity naturally varies depending on the type and volume of the mixture. With our mixtures, it held approximately 2 x 400 kg. All motors and sensors are fully functional.

Condition: good (used), Stock number: 2852 Manufacturer: Poland Year of manufacture: 1974 Machine number: 33891 Type / Model: TUD 50 Centre distance: 2,000 mm Spindle bore: 56 mm Centre height: 250 mm Swing over bed: 500 mm over cross slide: 300 mm Hjdjx Uykxopfx Ahyjng Speed range: 18 to 1,800 rpm Longitudinal feed: 0.08 to 3.26 mm/rev Cross feed: 0.04 to 1.63 mm/rev Power connection: 7.5 kW Accessories/Equipment: 3-jaw chuck Condition: good Weight: approx. 3.5 t Dimensions: 3,500 x 1,150 x 1,600 mm

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Hodsxta Dyepfx Ahysng

Condition: good (used), Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm -Dimensions: 870/45/H610 mm Hnedpfx Ahjfth Sbjysg -Weight: 6.4 kg

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Holz Her Power Feeder, type 1112 – 4 rollers Hsdpfx Ahoxpm Evsyong Location: Ex stock 54634 Bitburg - Immediately available -

Year of construction: 2018, operating hours: 4,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: COPR40801381, Capacity 15 m3 Road approval Air conditioning Hsdpfjx Tcxcjx Ahyjng

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Hodjxlcauspfx Ahysng Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: excellent (used), 6 drilling units with two heads two side heads spindles span 32mm max material length 2250mm Hjdpfx Ahow Ad Tmoysng magazine feeding manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation

Condition: used, functionality: fully functional, Manufacturer: Haaf (formerly Gema) Type: LZ 185 Swing diameter over bed: 365 mm, over cross slide: 225 mm Turning length: 750 mm Centre height: 185 mm Spindle bore: 40 mm Speed range: 20 – 1,600 rpm Digital display Heidenhain VRZ 773 B on 2 axes (scales on cross slide, longitudinal slide, and top slide) Dimensions: 1,900 x 900 x 1,700 mm Weight: approx. 800 kg Features: • Spindle brake operated by foot pedal • Adjustable stop on the cross slide (feed cut-off) • Splash guard Accessories included: - Operating manual - Multifix B tool holder with 2 inserts - Coolant pump integrated in machine base (no coolant hose connected) - Forkardt 3-jaw wedge bar chuck 200 mm Hodpfxow Svtcj Ahyeng - Albrecht drill chuck 1-13 mm Total weight approx. 950 kg Condition: Used The machine runs smoothly and can be inspected under power. All information is given without guarantee and subject to error. All dimensions are approximate. This offer is non-binding. The machine can be inspected by appointment. Subject to technical changes, errors, and prior sale! All prices are net plus VAT. Payment by advance transfer including any shipping costs within 14 days after conclusion of contract. If payment in full is not received within this period, the seller reserves the right to cancel the contract. Sale only to businesses as defined by § 14 BGB. The machine is sold excluding any warranty for material defects. This exclusion does not apply to claims for damages from liability for material defects resulting from grossly negligent or intentional breach of duty by the seller or their agents, or in the event of injury to life, body, or health. Any remaining rights against third parties for material defect liability will be assigned to the buyer. Please understand that I cannot accept liability for compliance with any locally applicable and generally required safety regulations for the sold machine and its components. Compliance with such safety regulations is the sole responsibility of the final operator. All contracts concluded with me are subject exclusively to the law of the Federal Republic of Germany, excluding the UN Convention on Contracts for the International Sale of Goods. Place of jurisdiction agreed as Mannheim.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 80 mm -Transport width: 820 mm -Shaft: M16 x 2 Length 60 mm -Quantity: 4 pieces available Price: per piece Hsdpfoit Eurex Ahyeng -Overall dimensions: Ø 80 x 945 mm -Weight: 5.6 kg/piece

Condition: used, tank capacity: 1,000 l, GENERAL Remarks: Containers are fitted with a pump at the bottom (see photos) Internal diameter: 1,320 mm Overall width: 1,350 mm Overall height: 2,400 mm Overall length: 2,210 mm Base type: mobile frame Location: Bremen Volume: 1,000 liters Cylinder wall thickness: 3.1 mm Product-contact material: Stainless steel V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 550 mm Last application: transport container for viscous gels TANK Bottom: conical bottom Hnedpfjxqcdkex Ahyjg EQUIPMENT Manhole / Dome: in top (DN 400) Outlet: 72 mm TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3.0 mm Top wall thickness: 2.9 mm

Condition: used, Feed unit WGOMA VS 34 – used – including stand ----- Technical data ----- Rollers: 3 pieces, Number of speeds: 4 Hnsdpfx Aow Nv N Sjhyog

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers with plastic attachment, diameter 65/89 mm Hnodpfoit Eunsx Ahyog -Transport width: 1020 mm -Quantity: 10x transport rollers available Price: per piece -Overall dimensions: Ø 90 x 1045 mm -Weight: 7.2 kg/piece / 1 pc. MA9018 6.6 kg

Condition: good (used), Year of construction: 2009, Conveyor belt, belt conveyor, transport belt, belt conveyor Hodpfjtrhl Tox Ahyeng -Manufacturer: Grenzebach, Conveyor belt, 2-level conveyor belt, type EZT with guide rollers -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 500 mm -Roller spacing: 760 mm -Conveyor height: spacing 300 mm -Drive: 2x SEW-Eurodrive 0.25 kW 1380/35 rpm -Number: 3 conveyor belts available - Price: per piece -Dimensions: 1460/1350/H1380 mm -Weight: 274 kg/unit

Condition: good (used), Rotary hub drive, center turning device Hjdpob A Nf Defx Ahyeng -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates Hedef Ek Hfjpfx Ahyong -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg