Used Felins Loop Plus for sale (5,742)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: Dsdpfxoyxvwie Ak Ajcp • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: MMZO 903 706, Model: Prima Plus Amrys, Machine No.: MMZO 903 706, Year of Manufacture: 2004, 9 stations, Length approx. 22 m as shown in the picture without any other items shown in the picture Note: If technical or electronic devices are included in the item, their functionality has not been tested. Note: Pallets are included in the item if shown in the picture. This Müller Martini Prima Plus Amrys gathering machine will be auctioned online in our industrial auction / machine auction entitled “Closing of a well-known printing company: printing machines, extensive printing machine accessories, production technology, spare parts, conveying technology, workshop and operating equipment, as well as storage and office furniture.” Dcodpo Ahrw Hjfx Ak Aep You can find this and many other items from the fields of machinery, printing machine accessories, and production equipment on our platform.

Condition: ready for operation (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Djdpj Afdmasfx Ak Aecp Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: used, Year of construction: 2018, functionality: limited functionality, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, If you are interested, please contact us directly via email at Bauer Massstabfabrik. Dcedpsy Thc Hsfx Ak Asp For sale is a highly professional Durst Rho P10 200 Plus UV inkjet printer. This industrial hybrid machine combines the unparalleled precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for printing companies that need to switch flexibly between rigid sheet media and flexible roll materials. Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine color gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color space: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Year of manufacture: [2018] Condition: Technically and visually in good condition. The machine has only been operated in a single-shift operation and has been regularly maintained. Availability: From [immediately] or by arrangement. Location: [83410 Laufen D] Scope of delivery: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: Mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). On-site inspection and print samples are available by prior appointment. Further pictures or information on request.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, L&Z Lathe KMUTH BASIC Plus incl. 3-axis digital display - Year of manufacture 2011 - CE marking - Three-axis digital display - Center height 150mm - Max. turning diameter 300mm - Max. turning diameter over support 178mm - Max. turning diameter without bridge 430mm - Center distance 810mm - Spindle bore 38mm - Spindle speeds (geared) 60 - 1550 rpm (9 steps) - Automatic longitudinal / facing feeds - Spindle mount - Camlock D1 - 4" - Tailstock taper MK 3 - Quill travel 100mm - Bed width 180mm - Multifix base with insert - Electric chuck guard - Work light - Coaxial center - 3-jaw chuck - 2 x steady rests Dodjz Hwx Espfx Ak Aocp - Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 550 kg Errors and omissions excepted.

Condition: used, Year of construction: 2015, controller model: Bedienpult, _____ Description: Year of manuf. : 2015 Control : Bedienpult General: Manufacturer:StrikoWestofen GmbH Type:Westomat® 1200 Plus+ "A" Year of construction:2015 Dcedpfx Aj Ahghfok Asp Operating voltage:400 V / 50 Hz (3Ph/PE/N) CE:built according to Machinery Directive 2006/42/EC Weight:4,947 kg net Furnace / Heating: Design:Resistance-heated holding furnace Refractory:Special grade, specially dried Heating:1 set of heating elements Melt temperature measurement:Double thermocouple with SiC :protection tube Furnace chamber measurement:Thermocouple Dosing system: Riser tube:complete, flanged 50/21 Dosing control:ProDos® 3 Biscuit correction:DISPO 35 Pouring launder:Yes Control / Electrics: Measuring, switching and control unit:Control cabinet with plug :connection Temperature control:Melt and furnace chamber Heating power switching:Yes Interface:Signal interface to casting machine Operator panel:with indicator lights and controls Additional controls:for installation in Frech control cabinet Lifting-tilting frame / Undercarriage: Lifting-tilting frame:Scissor lift table with hydraulic cylinder Hydraulics:Power unit and hand pump Undercarriage:5,000 kg, complete, manual, smooth rollers Intermediate frame:up to 600 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Matsuura G-tech (Fanuc), controller model: 16i, workpiece height (max.): 750 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 400 kg, total height: 2,635 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 13,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained Matsuura H-Plus 405 with pallet pool. This is a highly compact machine with extensive machining capabilities and 240 tool positions in the magazine. The machine was manufactured in 2004 and is equipped with the Matsuura G-Tech 16i (Fanuc 16i) control system. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 6 Djdpfsz Rmk Tjx Ak Ajcp Table load capacity: 400 kg X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table indexing: 0.001° Spindle mount: Mas BT40 Big Plus Spindle speed: 50 – 15,0001 rpm Spindle motor: 22/18.5 kW Magazine capacity: 240 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! Dodpfx Ake Ahppds Aecp - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 37,280 h, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 2 Nm, controller manufacturer: Fanuc, controller model: 31i- B5, spindle speed (max.): 54,000 rpm, operating hours of spindle: 11,360 h, spindle nose: HSK-E 32, number of slots in tool magazine: 40, tool length: 200 mm, tool weight: 1,200 g, 5-Axis Mill-Turn Center We offer you: Manufacturer: Chiron Model: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Technical Specifications: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar capacity: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm Dcodpfxs Agr Ntj Ak Aop NC 2-axis swivel unit: Swivel angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Number of tool positions: 40 pos. Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37.280 h Spindle hours: approx. 11.360 h Please refer to the attached PDF for technical specifications and accessories. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell items prior to order confirmation!

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Dsdsz Slk Aspfx Ak Aecp Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: ready for operation (used), functionality: fully functional, Selling a comprehensive CNC tool package, including a tool storage rack. The package includes numerous high-quality tool holders and clamping systems, including those from: BIG DAISHOWA SCHUNK BIG-PLUS spindle system MEGA NEW BABY CHUCK Hydraulic chucks Collet chucks Various milling cutters and other tool holders The tool holders come from industrial use and show corresponding signs of wear. Dcodpfx Ao Ah Sltsk Aep Everything will be sold together, exactly as shown in the pictures – including the red tool storage rack and all tools and holders inside. Ideal for CNC operations, toolmaking, machining, or as an addition to an existing tool inventory. Due to its size and weight, only pickup is possible. If you are interested or have any questions, please feel free to contact me.

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,200 mm, bale width: 730 mm, bale height: 1,100 mm, bale weight: 500 kg, total width: 1,047 mm, total height: 3,079 mm, total length: 1,850 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,300 kg, input frequency: 50 Hz, Strautmann PP 1207 Plus Baler – Year of manufacture 2004 Used vertical baler, Strautmann PP 1207 Plus, for the efficient compaction of cardboard, paper, film and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: PP 1207 Plus Year of manufacture: 2004 Pressing force: 580 kN / approx. 59 tons Motor power: 4 kW Power supply: 400 V / 50 Hz Bale dimensions: approx. 1,200 x 1,100 x 730 mm Bale weight: approx. 400–500 kg, depending on the material Feed opening: approx. 1,190 x 600 mm Machine weight: approx. 2,300 kg Dimensions: approx. 1,850 x 1,047 x 3,079 mm (L x W x H) Transport height: approx. 2,170 mm Noise level: below 80 dB(A) Djdoz Ht Ezopfx Ak Ajcp The machine is suitable for volume reduction and compaction of cardboard, paper and film. For transport, the machine can be partially disassembled. The hydraulic ram must then be reassembled professionally. Inspection possible by appointment. All information without guarantee. Subject to prior sale.

Condition: excellent (used), Year of construction: 2020, operating hours: 41 h, functionality: fully functional, Baling press HSM V-Press 825 Plus Pro Year of manufacture: 2020 Operating hours: 41 hours Bale counter: 145 bales Machine is fully functional, inspected, and maintained. Technical data: Width x Depth x Height: 1700 x 1248 x 2370 mm Bale length x Bale width x Bale height: 1200 x 780 x 700 mm Width x Height of the feed opening: 1195 x 540 mm Weight: 1210 kg Type of consumable material: Strapping band Material to be baled: Film, mixed paper, cardboard, stamping waste, clothing Pressing force: 250 kN Voltage: 400 V / 50 Hz Power: 4.0 kW Dodpfx Ajz H Saqek Ajcp Rated current: 9.0 AMP

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M7106 was manufactured in 2017. It features a measuring range of 700 x 1,000 x 600 mm and is in near-mint condition with very low operating hours. The machine includes a Renishaw probe head and is regularly serviced. If you are looking to get high-quality 3D measurement capabilities, consider the Mitutoyo Crysta-Plus M7106 gantry robot we have for sale. Contact us for further details. Dsdpfx Aks Agwwvo Ascp - Measuring Range (X / Y / Z): 700 x 1,000 x 600 mm- Operating Hours: Very low (rarely used)- Technical Condition: Near-mint / Exceptionally good condition- Measuring Range (X / Y / Z): 700 x 1000 x 600 mm- Maximum Spatial Diagonal Tested: Up to 1515 mm- Controller Type: UD1- Software Version: MCOSMOS-1 v4.2R1- Probe Head: Renishaw MH20i- Probe: Renishaw TP20- Probe Module: Standard Force (SF)- Stylus Configuration: Length 20 mm, Stylus ball diameter 3.9924 mm- Maximum Permissible Length Measurement Error (EL, MPE): 4.5 + 4.5 * L/1000 µm (where L is in mm)- Single Stylus Form Error (.1x25:SS:Tact): 3.6 µm (MPE: 4.5 µm)- Last Calibration Date: 04.04.2023

Condition: like new (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, saw blade bore: 800 mm, Equipment: saw blade guard, scorer, We offer for sale a modern CNC miter saw, Easy Cut 828 PLUS, manufactured in 2023, designed for professional production of wooden structures, roof trusses, frameworks, and other wooden components. The machine is in excellent technical condition and ready for immediate use in production. Main advantages of the machine: ✔ CNC control with a touch screen, easy operation, and the ability to load projects via USB, LAN, or Ethernet. Djdezlrn Uopfx Ak Aocp ✔ Automatic linear material feed using a servo motor. ✔ Cutting at any angle with 4 controlled axes. ✔ Cutting materials up to 13m in length. ✔ Rotating the saw blade 360°. ✔ Tilting the blade from 90° to 38°. ✔ 15m input conveyor. ✔ 5.5m output conveyor. ✔ Saw blade diameter of 800 mm. ✔ Automatic optimization of cuts with minimal material waste. ✔ Marking of cut parts directly on the machine. ✔ Pneumatic horizontal and vertical material clamping. ✔ High accuracy, speed, and safety. ✔ Manual and fully automatic operating modes. ✔ Online service support via internet connection. ✔ Full compatibility with MiTek software for truss production. Technical solution: The machine consists of an input conveyor, a CNC sawing unit, and an output conveyor. The material feed is provided by a servo motor with high positioning accuracy. The sawing unit allows for cutting precise lengths and complex angular cuts with an adjustable center axis.

Condition: used, mileage: 18,600 km, power: 130 kW (176.75 HP), first registration: 09/2025, fuel type: diesel, next inspection (TÜV): 09/2028, color: white, gearing type: automatic, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, Citroën Spacetourer M for sale Identical model to Opel Zafira Several units available, approximately 10 9-seater Previously used as a school bus by a German bus company. Vehicle is from a German dealer, not a re-import. The vehicle will be sold with the existing wrap design (applied as a sticker), as is. It can be easily removed, even by someone without experience. The price is a fixed price. The vehicle is fitted with all-season tires. The price refers to one vehicle and not both. The mileage is almost identical. Special equipment: Seat configuration: 9-seater, fabric, Curitiba Black Additional equipment: Airbag for driver/front passenger, Audio system: MyCitroen Play, Exterior mirrors electrically adjustable, heated, and foldable, Exterior mirrors painted, Floor covering in front (rubber), On-board computer, Parking assistance system rear, Automatic activation for headlights, Driving assistance system: Emergency braking assistant, Driving assistance system: Emergency call and assistance system (CITROEN Connect), Grip Control, Rubber floor mat for passenger/cargo area, Heated rear window, Rear window wiper, Body/structure: Station wagon, Head airbag system, Head airbag system rear, Steering column (steering wheel) mechanically adjustable in height/length, Model update, Engine 2.0 L - 130 kW Blue-HDI FAP, Parking brake electric, Wheelbase 3275 mm, Tire repair kit, Low emissions according to emission standard Euro 6e, Sliding doors on both sides, SCR system (AdBlue technology), Side airbag front, Rear and rear window tinted, Side protection strips in vehicle color, Seat cover/upholstery: Fabric, Special paint: Ice White / Kaolin White, Sun visors with mirror (illuminated), Steel rims 7x17, Socket (12V connection) in cargo/passenger compartment, Socket (12V connection) in center console front, Start-stop system, Bumpers painted, Door handles exterior painted, Underride guard , Rain sensor, Rear and rear window tinted Dedpfo Aicbgox Ak Aocp Net export possible.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Gurutzpe CNC lathe, model AT 600-Plus x 2000mm, equipped with Siemens CNC, featuring a Sauter automatic tool turret with 4 positions, a 105mm through-hole, a longitudinal feed rate of 10,000mm for the Z-axis, a transverse feed rate of 8,000mm for the X-axis, a 40Kw motor, 380V power supply, a bed width of 630mm between guides, a Morse taper of 5, a tailstock spindle diameter of 140mm, a main carriage length of 795, a transverse carriage width of 375, and a turning diameter over the bed of 1200mm. Accessories include a 3-jaw universal chuck with a 500mm diameter, a 4-jaw independent chuck with a 1000mm diameter, a fixed steady rest, and a traveling steady rest. It also has a chip extractor. The lathe is in very good condition. Dsdpo Ahrhxjfx Ak Aecp

Condition: used, SPECIFICATIONS: Total Heading Load (kN) 700 Maximum Heading Load per Station (kN) 450 Strokes per Minute - Variable Speed 1/min 100/300 Cutoff Diameter at 600 N/mm2 12mm (600 N/mm2) Maximum Transfer Diameter 14mm Cutoff Length (min/max) 3mm- 50mm Kickout Stroke - Die (Min/Max) 3mm - 50mm Kickout Stroke - Punch (Min/Max) 12/32mm Maximum Die Diameter 60mm Dodsz Irinopfx Ak Ajcp Punch Diameter 50mm

Condition: used, SPECIFICATIONS: Total Heading Load (kN) 700 Maximum Heading Load per Station (kN) 450 Dcsdpfx Aoz Irh Dek Ajp Strokes per Minute - Variable Speed 1/min 100/300 Cutoff Diameter at 600 N/mm2 12mm (600 N/mm2) Maximum Transfer Diameter 14mm Cutoff Length (min/max) 3mm- 50mm Kickout Stroke - Die (Min/Max) 3mm - 50mm Kickout Stroke - Punch (Min/Max) 12/32mm Maximum Die Diameter 60mm Punch Diameter 50mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, spindle bore: 56 mm, spindle speed (max.): 4,000 rpm, overall weight: 1,450 kg, For sale is a high-precision, cycle-controlled lathe, a WEILER CONDOR VC plus, manufactured in 2013. The machine is in fully functional and extremely well-maintained condition and comes with a very extensive set of accessories (pictures of the machine in use are included). Technical data & equipment: Manufacturer / Model: WEILER CONDOR VC plus Year of manufacture: 2013 Center height: 180 mm Distance between centers: 800 mm Swing over bed: 360 mm Spindle bore: Ø 56 mm Spindle speed: continuously variable up to 4,000 rpm Operating voltage: 400 V Connected load: 12.5 kVA Machine weight: approx. 1,450 kg Digital display / control: WEILER VC plus screen electronics Accessories & scope of delivery (as shown in the pictures): - 1x steady rest (fixed rest) Dcsdpoz Dwtwjfx Ak Aop - Extensive Multifix quick-change tool holder set - Large selection of chuck jaws (hard & soft) - Three-jaw chuck mounted - Splash guard / protective cover Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2018, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for printing companies that need to switch flexibly between rigid sheet materials and flexible roll materials. Dcedpfsz Dr T Sex Ak Aop Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine color gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color space: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Year of manufacture: [2018] Condition: Technically and optically in good condition. The machine operated exclusively in a single-shift operation and was regularly maintained. Availability: Available from [immediately] or by arrangement. Location: [83410 Laufen D] Scope of supply: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). Inspection and print tests on site are possible by prior appointment. More pictures or information available on request.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The machine is in very good condition, fully functional, and has a pneumatic lift with an internal width of 200 cm. We speak English, German, and languages of the former Yugoslavia. Contact is also possible via WhatsApp. Djdj Agfa Uopfx Ak Ascp

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,180 h, total height: 1,070 mm, total width: 1,120 mm, overall weight: 211 kg, travel distance X-axis: 294 mm, travel distance Y-axis: 211 mm, travel distance Z-axis: 144 mm, product length (max.): 740 mm, number of axes: 3, This 3-axis 3DSYSTEMS ProJet MJP 2500 Plus was manufactured in 2019. It features a build volume of 294 x 211 x 144 mm and a build material capacity of 352.4 kg. The printer is equipped with the MJP EasyClean System for automatic support material removal. If you are looking to get high-quality 3D printing capabilities, consider the 3DSYSTEMS ProJet MJP 2500 Plus machine we have for sale. Contact us for further details. Dcsdpfx Akoz U Ap He Asp - Machine Dimensions: 112 x 74 x 107 cm - Machine Weight: 211 kg - Voltage: 100 - 240V~ - Frequency: 50/60 Hz - Phase: 1 PH - Current: 12 - 9.5A - Software: 2 lifetime 3D Sprint licenses - Included Platforms: 2 print platforms - Included Accessories: MJP EasyClean System (steam bath for automatic removal of support material)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Dedpfx Akezcux Se Ajcp Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, The Foellmer Duplikator DigiTab 2010 Plus numbering and marking device (printing – counting – marking = 1 process) features menu-guided operation via a touchscreen display located on the rear of the housing. The mobile and height-adjustable stand is positioned on the side of the delivery area for most machines. Any number from 5 to 99999 can be set for the numbering strip. Stepless adjustment of the strip length from 20-200 mm and a dwell time of approximately 0-10 seconds for the numbering strip are possible. The Suptramat enables the control and waste sheets removed from the printer during continuous production to be deducted from the total count, and simultaneously, the package size marked by the strip is adjusted accordingly. The total counter records the total print run of the good sheets, after it has been corrected by the Suptramat. Dcsdsz Ixizepfx Ak Aop To connect the DigiTab, a universal connection box is required for an interface with a potential-free or 24 V pulse (clock) signal directly from the machine or from a sensor.