Used Fishing Net for sale (9,324)

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Dkodpfx Aewtnxnofnsh Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2025112701, Aluminium incline conveyor with substructure including leveling feet and machine feet for compensating uneven surfaces - Feed height: 500 mm - Inclined section: 4,500 mm Dkedpfx Afsydb Rweneh - Discharge height: 3,000 mm Design: Aluminium construction - Reinforced triple profile 135x45 mm - Continuous galvanized discharge sheet, 2.0 mm thick Drive drum + return drum made of S235 steel, welded and machined Ø150x620 mm, crowned surface, shaft fixed with pillow block bearings. Drive: Inline geared motor 1.10 kW, belt speed 0.77 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm Endless high-frequency-welded with stepped joint Belt material: 2-layer, particularly cross-stable 2 pcs. corrugated sidewalls, 80 mm high, 50 mm wide, edge-aligned, high-frequency welded 18 pcs. T60 cleats, 430 mm long, spacing approx. 508 mm, centrally welded on Belt material: 2-layer, particularly cross-stable Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 500 mm, as follows: (Top view) Transverse arrangement: 50 + 500 + 50 mm

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Dkodpfx Afex Tiq Sensh Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, throat depth: 350 mm, total height: 3,200 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 150 mm, total width: 1,860 mm, total length: 3,200 mm, overall weight: 8,000 kg, pressing force: 160 t, distance table to ram: 500 mm, year of last overhaul: 2025, Equipment: safety light barrier, GARNET C-FRAME ECCENTRIC PRESS MODEL: PE4-160 – SHOWROOM MACHINE DESCRIPTION: Frame constructed from welded and stabilized steel. The slide is made of welded steel, equipped with four guides and a base designed for oil collection. Transmission between the drive shaft and the eccentric shaft is via a gear reducer with ground gears; this system allows operation at high tonnage with relatively low nominal speeds. Electropneumatic clutch-brake, equipped with dual-channel safety solenoid valve and cross-flow. The pneumatic system includes a compensation tank, filter-regulator-lubricator unit with control pressure switch, and safety valve. Centralized automatic lubrication with a progressive lubrication system. Electric panel with programmable PLC (Omron or Pilz) and electrical components by Siemens or Schneider. Operation by two-hand push button control and low-voltage electric foot pedal. Safety provided by photoelectric barriers and side guards with safety micro-switches for opening. Emergency stops. All components comply with CE regulations. FEATURES: • Welded steel structure with reinforced sections. • Four anti-friction sliding guides. • DIN-650 T-slots for tool clamping. • Dual operation: two-hand and foot pedal. • Piece counter system. • Programmable PLC. • Hydraulic overload release system for slide unlocking. • Two-cam rotary limiter. MODEL PE4 – 160 Nominal capacity tn 160 Djdpfxow S Huwe Afnokh Strokes per minute 45 Nominal stroke height 6 mm Stroke adjustment 20-150 mm Max. closed die height 350 mm Table-slide opening 500 mm Slide adjustment 70 mm Table dimensions 700 x 1100 mm Slide dimensions 370 x 620 mm Table central bore diameter 280 mm Slide bore diameter 55 mm Throat depth 350 mm Main motor 11 kW Number of connecting rods 1 Number of guides 4 Safety light curtains yes Dual-body safety valve yes Pneumatic clutch yes Anti-vibration silent blocks yes Overall width (W1) 1800 mm Overall depth (D1) 1860 mm Height (H1) 3200 mm Approximate weight 8000 kg

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 7,000 mm, total width: 4,750 mm, total length: 6,000 mm, pressing force: 1,000 t, reverse speed: 60 mm/s, The MV-1000E/NC-SINCRO hydraulic press is custom-designed for the adjustment of progressive dies. It features a tilting upper table and a movable lower table made of C45E steel, machined with DIN-650 T-slots to ensure minimal friction in the vertical movement of the upper table. This is achieved through the installation of maintenance-free bimetallic bushings and perfect parallelism ensured by four high-mechanical-resistance cylindrical columns of 300 mm in diameter, chrome-plated and rectified. STRUCTURE AND TABLES • Features a structure made from oxy-cut steel divided into three electro-welded monoblocks, exclusively manufactured from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed with finite element software. • Cylindrical columns with a diameter of 300 mm, high mechanical resistance, rectified, and chrome-plated to maintain a low friction and wear coefficient. • Upper table with T-slots and anti-fall safety system. • Useful table surface: 4,750 x 2,250 mm. • Structure designed to support 600 TN of concentrated force on 1/3 of its surface. • Lower table designed to support up to 50 TN in displacement, supported by bronze guides with graphite load and mechanical positioning centers for precise table positioning. CYLINDER AND HYDRAULIC GROUP • 6 single-acting cylinders with lapped sleeves, chrome-plated pistons, and anti-wear guides. • Four 50 TN hydraulic compensators located at the ends of the lower table. • 800-liter hydraulic group with a silent Denison pump, automatic disconnection of the fast approach pre-filling speed, and equipped with a decompression system in working speed. • Proportional pressure system and optical gauges for displacement control on the upper table, with a synchro-electronic system for compensating off-center or unbalanced forces. • Hydraulic group cooling system with an independent air-oil radiator unit. • All M series hydraulic presses include a lateral pressure switch to adjust the most suitable pressure setting for each type of work. • Glycerin manometer with tonnage reading. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC model SIMATIC S7 1200 and a 12” touchscreen. Allows programming of semi-automatic and automatic operating modes, power, travel, and upper table dwell time. Capable of storing 300 recipes, with each recipe able to program all the above values. • Low voltage operation via two-hand pushbutton. • Anti-fall safety system with hydraulic safety jaws. • Level IV photoelectric barriers installed at the front and rear. • Lateral protections with opening and safety microswitches. TECHNICAL SPECIFICATIONS Power tn 125 - 1000 Opening Force tn 100 Powered Speeds 1 Engine Power kW 75 Fast Pre-Fill Speed mm/s 100 Variable Working Speed mm/s 12-4 Return Speed mm/s 60 Guide Diameter mm 300 Maximum Pressure Bar 290 Useful Table Area mm 4.750 x 2.200 Lower Table Displacement mm 2.200 Dkjdpfx Ajwpgwnjfnjh Vertical Travel of Upper Table mm 800 Between Columns mm 5.000 x 1.490 Total Front mm 6.000 Total Side mm 4.750 Total Height mm 7.000 Weight kg 150.000

Condition: used, Year of construction: 2020, functionality: unexamined, total height: 6,400 mm, total width: 4,500 mm, total length: 3,800 mm, operating speed: 110 mm/s, reverse speed: 180 mm/s, distance table to ram: 1,500 mm, We are offering here a new build of the machine shown. The machine was put into operation in 2020 and can be inspected by the customer. Technical data: Press force T 800 Opening force T 80 Motor power KW 55/75 + 55/75 Piston stroke 1000mm Rapid pre-fill speed mm/s 110 Working speed mm/s 6 Return speed mm/s 180 Guide diameter mm 250 Max pressure Bar 250 Useful table area mm 3,500 x 2,000 Lower table displacement mm 2000 Between columns mm 2,000 Dkedewlrv Ujpfx Afneh Open height mm 1500 Total front mm 3800 Total side mm 4500 Total height mm 6400 Weight kg 134,600 The MV-800E/NC-SINCRO press was specially developed for the adjustment and testing of molds, dies, and stamps. The 4 columns with 250 mm diameter made of C45E steel were specially manufactured for high stress. It features an optimized hydraulic system with a pressure of up to 250 bar, ensuring long service life and reliability. It meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE • A structure that withstands 600 T concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table surface: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders with 400 T each. • Single-stage hydraulic unit with automatic shutoff of pre-fill speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Equipped with digital potentiometers on the upper table for displacement control and an electronic synchronization system to compensate for off-center or unbalanced forces. • The press is equipped with a side pressure switch to regulate the most suitable pressure setting for each specific task. • Glycerin manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds of the main cylinder feed. • The press has a manual cycle and an automatic cycle (activated via a test button selector): • The manual cycle allows the execution of all movements (step by step) of the press at slow speed. • The automatic cycle allows the press to perform a complete production cycle. • Electrical safety system for the upper table fall protection system. • Lower table with hydraulic removal and physical stops. • The machine features a control panel with a touchscreen display for entering operating and calibration data. • 2 optical barriers of 1,000 mm with safety level IV installed at the front and rear. • Electrical components from Siemens are manufactured according to applicable CE regulations and laws in protection class IP55. • Electrical and hydraulic functions are redundant and self-controlled. Includes an additional safety block and self-monitoring devices for operation and safety. Includes inspection and certification of correct operation and safety distance for light barriers. • Safety is ensured by a laser and area protection with light barriers of level IV.

Condition: used, Technical details: Dkodpfx Afju Ng S Dsneh grinding spindle speed: 1440 U/min voltage: 220 V / Hz total power requirement: 1,1 kW machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch *

Condition: used, functionality: fully functional, overall weight: 1,500 kg, Designed to perform assembly, welding, adjustment, and mounting operations under optimal safety conditions. The innovative features of these positioners, truly unique in their category due to their specifications, enable the following operations: - Continuous and bidirectional rotation - Tilting of the table - Table elevation Rotation is carried out by a motor reducer system with a slewing ring. The elevation and tilting movements are achieved via hydraulic cylinders. The virtually unlimited working positions offered by this equipment allow the operator to work in a safe and ergonomic position, significantly reducing working time and eliminating dependence on auxiliary lifting devices. MODEL Dkodpfx Aeybb I Rjfnjh PV-4500 Maximum capacity (Kg): 4,500 Motor power (kW): 5.5 + 0.5 Table diameter: E (mm): Ø1100 Table tilt β (degrees): 0-92 Table rotation speed (rpm): 0.8-1.2 Maximum height with vertical table: A (mm): 1,400 Maximum height with horizontal table: B (mm): 1,520 Minimum height with horizontal table: B' (mm): 770 Overall length: C (mm): 1,985 Weight (kg): 1,500 MAIN COMPONENTS: a) Base structure: Engineered for highly stable performance. b) Table with toothed slewing ring: Enables infinite rotation of the workpiece. c) Hydraulic unit: Integrated centrally within the positioner, equipped with safety limiting valves. d) Inverter group: Allows rotation control via an inverter managed from a push-button panel. e) Electrical installation and controls: Consists of a central control panel with frequency inverter and PLC, enabling all planned operations to be performed via a control panel.

Condition: good (used), - Type: FP 6 glass grinding machine with 6 spindles - Serial number: 22 - Year of construction: 2002 - Glass thickness: 2 - 25 mm - Min. glass dimension: 80 x 200 mm Dkedpfx Afeq Dzpvsnsh - Machine dimensions: 5200 x 1200 x 2800 mm - Weight: 1500 kg - 2 diamond wheels for edge - 2 polishing wheels for edge - 1 combined wheel each for front and rear seam - Connected loads: 380V, 50Hz, 8.8 kW - Offer price 4.500 € free truck loaded

Condition: excellent (used), S 360 F Delphin Design Armchair with Armrests Stackable, elegant, easy to link, low maintenance, and very comfortable. Anthracite grey plastic (RAL 7016) 50 units in stock Manufacturer: THONET - DELPHIN DESIGN Chair width: 58 cm, with a row spacing of only 53 cm. Depth: 55 cm Height: 82 cm Steel tube frame with armrests, chrome-plated. Armrest pad: Elastomer plastic Seat and backrest: Anthracite grey plastic Versatile applications: office, coworking spaces, events, trade fairs... Dkjdpfoya Iw Njx Afnoh Easy handling and minimal setup and breakdown times Manufacturer: Thonet Designer: Delphin Design Material: Polypropylene Width (cm): 58 Depth (cm): 55 Height (cm): 82 Original price per chair: 490 EUR

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor. Dkedpfx Asvu D Dwofnjh

Year of construction: 2026, condition: new, Stable heating and / or hay drying and hay drying installations and drying cabins assembly in containers plug and play (Directly deployable also rental) installation in container (s) or on location Switzerland and Austria or southern Germany. Power from 80kW to 500kW and on request >500kW. Dksdpfx Askytn Hjfnsh Warm air heaters in stock, new and used!

Condition: good (used), Circuit breaker, switch, push button -Type: TS 25/3 0 Awk -Max. 380 VAC Price: per package -6x: Packs of 2 pieces each -Weight: 0.8 kg Dkedpob A Iaisfx Afnoh

Condition: used, axle configuration: 3 axles, first registration: 04/1991, color: other, Year of construction: 1991, Empty weight: 7.700 kg Dedpeuf Nwlefx Afnjkh Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 9 mm right 9 mm We have the possibility to stack trailers! 

Condition: used, Year of construction: 2022, functionality: unexamined, CNC long-bed machining center, model CMA 3RD-CNC, year of manufacture 2022, serial number 4063. The machine is suitable for drilling, thread cutting, milling, and other machining processes on large-format workpieces. Equipped with a robust steel frame construction and industrial PC-based control system from Omron. Features: Spindle: 13.1 kW, BT-40 taper, speed approx. 2,000–6,000 rpm. Rapid traverse speed: X and Y axes up to 30 m/min. Travel distances: X = 6,000 mm, Y = 600 mm, Z = 450 mm. Drilling capacity: Ø22–Ø42 mm. Thread cutting up to M30. Table width: 580 mm with T-slots. Electrical: 400 V, 50/60 Hz, 32 A, 3-phase. Control voltage 24 V. Weight approx. 7.2 tons. Includes tool changer with carousel magazine. Dkjdox N Ncgjpfx Afnoh

Condition: good (used), machine/vehicle number: J31536 - 2177478, Year of construction: 2019, Load capacity 25,000 kg Lifting speed 0.8 / 3.2 m/min Lifting height 4 m Number of strands 2 Chain 23.5 x 66 mm Operation via hand remote control – conversion to radio control possible Drive group 1Bm / m3 Electrical specifications 400 V / 3.1 / 12.5 kW Weight without support frame 780 kg Dedpjx T A Iqsfx Afnskh Documentation available - good condition - little used - PRICE ON REQUEST!

Year of construction: 2005, condition: excellent (used), Magnet plates Year of manufacture: approx. 2005 Dksdpoxhh Sbjfx Afneh LxW: 70x75 cm

Condition: excellent (used), Year of construction: 2008, Climaveneta cold machine (Schiller - water) Dsdpsf S A R Hsfx Afnjkh Year 2008 Type:FOCS/LN 0751 WEEK 70,1

Condition: good (used), Year of construction: 1993, Netstal 1750 /870 HP Djdpfx Asg U Arxofnskh Closing 175 TO Year 1993

Condition: excellent (used), Year of construction: 1993, Netstal 870/1500 HP Year of manufacture: 1993 Dkedoxvmm Hopfx Afnoh Clamping force: 150 tons

Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Closing 100 TO Scrow 40mm Dkedpfx Asgi D Thjfnjh Stroke volume 44x44 Year 1990

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Tool changer: 30 positions Dsdpfjxg Nmkjx Afnekh Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: excellent (used), S 360 F Delphin Design Armchair with Armrests Stackable, elegant, easy to link, low maintenance, and very comfortable. Anthracite grey plastic (RAL 7016) 50 units in stock Manufacturer: THONET - DELPHIN DESIGN Chair width: 58 cm, with a row spacing of only 53 cm. Depth: 55 cm Height: 82 cm Steel tube frame with armrests, chrome-plated. Armrest pad: Elastomer plastic Seat and backrest: Anthracite grey plastic Versatile applications: office, coworking spaces, events, trade fairs... Easy handling and minimal setup and breakdown times Dkjdpex Upnaefx Afnsh Manufacturer: Thonet Designer: Delphin Design Material: Polypropylene Width (cm): 58 Depth (cm): 55 Height (cm): 82 Original price per chair: 490 EUR

Condition: excellent (used), S 360 F Delphin Design Armchair with Armrests Stackable, elegant, easy to link, low maintenance, and very comfortable. Anthracite grey plastic (RAL 7016) 50 units in stock Dkodjx Upi Rspfx Afneh Manufacturer: THONET - DELPHIN DESIGN Chair width: 58 cm, with a row spacing of only 53 cm. Depth: 55 cm Height: 82 cm Steel tube frame with armrests, chrome-plated. Armrest pad: Elastomer plastic Seat and backrest: Anthracite grey plastic Versatile applications: office, coworking spaces, events, trade fairs... Easy handling and minimal setup and breakdown times Manufacturer: Thonet Designer: Delphin Design Material: Polypropylene Width (cm): 58 Depth (cm): 55 Height (cm): 82 Original price per chair: 490 EUR

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. Dkjdpfxox Ruudj Afnjh 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers.