Used Flail Mower for sale (188)

Condition: new, empty load weight: 450 kg, maximum load weight: 850 kg, overall weight: 1,300 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 195/55r10c, *Tiltable car trailer with *grid attachment* and 100 km/h from *trailer manufacturer* STEMA type MUT O2 . With the sturdy *leaf grate attachment*, the *box trailer* is suitable for transporting *garden waste*, *small furniture, firewood, lawn mowers, quad bikes, ATVs* and *small machines*. As standard equipment, the *steel trailer* has a *crank for tilting the loading area*, *drive-over flap*, *100km/h approval*, *support wheel*, eight *lashing eyes*, *high-quality locks*, *galvalum galvanized side walls, hot-dip galvanized grid attachment* and a *V-drawbar*. Csdpfxoiwh Nms Ah Usri This *car trailer* is also available in different versions, for example as a *canvas trailer* or open. We also offer accessories such as *side wall attachments*, *tarpaulin & frame*, *flat tarpaulin*, *drawbar box*, cargo net, *drawbar protection cover, anti-theft device and lashing straps* at a reasonable price.

Condition: good (used), Tires with rims, tires for lawn tractors, ride-on mowers -Tire size: 23x9.00-15 AS -Dimensions: Ø 720 mm -Weight: 22 kg Credpfx Ahecgtyhs Uei

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. Crsdpfsu Rurujx Ah Uoi - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: used, Year of construction: 2019, operating hours: 4,943 h, functionality: fully functional, Shredder Willibald EP 5500 Manufacturer: Willibald Model: EP 5500 Shark II Year of manufacture (according to nameplate): 2019 Operating hours (read off): 4,943 Base machine – Shark II – 32 – 2-axle drawbar chassis, MAN engine 520 hp, Stage IV, flail set 32er with tungsten carbide, rubber belt; neodymium magnet; hydraulic, extended 4.5 m, steel motor hood, standard; central lubrication with pump; EP 5500 hydraulic support leg; extended feed hopper, hydraulically foldable; standard paintwork; cross-diagonal shredding flaps; standard hydraulic oil; 24V road lighting system as per StVO – EP 5500 decals & documentation – language: German; hydraulic quick-change hub system 32er; radio remote control; crawl drive; towing eye 50 mm; special equipment – 3-part basket screening system – compressed air hose – special decals; cross-diagonal shredding insert, welded; compressed air hose package for tools. Various spare parts Net purchase price plus statutory VAT. VAT will be shown separately on our invoice. Subject to change, errors, and prior sale. Sale is without warranty or guarantee and only to businesses. Cedpfx Ahow Imy Es Ujri Enquiries will be processed Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, mileage: 396,568 km, power: 130 kW (176.75 HP), first registration: 04/2006, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 6,310 kg, empty load weight: 6,190 kg, wheelbase: 3,050 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: none, suspension: steel, loading space width: 2,050 mm, loading space length: 2,400 mm, loading space height: 400 mm, Year of construction: 2006, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, cruise control, onboard computer, power assisted steering, seat heater, trailer coupling, * German vehicle * 1st hand * 4x4 all-wheel drive * New Mercedes Benz engine installed in 2013 * Detachable platform body * Steel floor * Aluminum loading flaps * DIN lashing eyes * Trailer coupling * Total towing weight: 27,500 kg * Trailer hydraulics * Municipal plate hydraulically adjustable size 3 * Front hydraulics * Front PTO shaft * Winter service lighting * Snow plow relief * Air conditioning * Cruise control * Engine brake * Joystick control * EPS manual transmission with clutch pedal Csdpfevhphuex Ah Uori * Interchangeable steering * Heated windshield * Driver's seat with air suspension and seat heating * Mower seat on the right * Heated electric mirrors * Reversing camera * Analog tachograph * Preparation for rotating beacons * ABS and ASR * Battery disconnect switch * Exhaust system raised * Leaf suspension * Body dimensions: L=2,400 x W=2,050 x H=400 mm * Mulag telescopic and front boom can be moved sideways on implement carrier * Drive via PTO shaft * GVW: 12,500 kg * Unladen weight: 6,190 kg * For sales to tradesmen and for export (non-EU and EU), German commercial regulations apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, Year of construction: 2025, working width: 9,100 mm, Mower Bar: Disc | Claas Disco 9300 Direct Swather Demo unit in use Crodpfxjwu Irkj Ah Uoi Year of manufacture: 2025 Large-area mower for rear tractor mounting, Cat. III - Working width: 9.10 m (8.90 m) - Main frame with optimized center of gravity due to rearward-angled outriggers - Low-speed concept with reduced speed to 850 rpm DIRECT SWATHER: - Central or unilateral swath merging via augers - Conical auger design for consistent crop flow - Swiveling augers for wide crop distribution - Auger discharge chute equipped with knife and counterknife Features: Wear skids Three-point hitch Drive shaft 1 3/8", 6-spline ISOBUS cable Outer protective curtains, hydraulically foldable Individual section lift (2-hose) Optionally available (not included in price): CLAAS Disco 3200 F Profil Front-mounted disc mower without conditioner 3.00 m working width with wear skids incl. ACTIVE FLOAT hydro-pneumatic suspension incl. drive shaft | Internal no.: 11264119

Year of construction: 2020, condition: new, Selling price: € 150, US$ 158 Galen Group designs and manufactures tough, durable, specialized forestry attachments for a wide range of applications. Csdpfx Aoph Rmkjh Ueri Our forestry attachments, deck mowers, grapples, log jaws, and tree shears, are designed and, on occasion, customized to arrive fully compatible with your tractors, loaders, excavators or skid steers. We offer product lines with multiple models to work seamlessly with different drive systems and horsepower capabilities. GALEN forestry attachments deliver excellent return of investment for the equipment investment. When you’re ready to get down to work, pick up a orange one that is the GALEN attachments! Price is representative, for detailed information please contact us.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,610 kg, fuel type: diesel, color: green, axle configuration: 4x4, driver cabin: other, Year of construction: 2009, operating hours: 750 h, machine/vehicle number: UH922A00522, Equipment: additional headlights, all wheel drive, trailer coupling, For sale: a multifunctional machine for year-round maintenance of outdoor areas. Equipped with a diesel engine and permanent four-wheel drive. Egholm City Ranger 2200, year of manufacture 2009. Engine power: 25.0 kW (34 HP), 750 operating hours. The machine's main advantage is its ability to be equipped with various attachments that can be swapped in minutes by a single operator without tools. Possible attachments include a snow plough, snow blower, sweeper brush with vacuum, sand spreader, roller brush, and mower. The offer concerns the sale of the machine with a snow plough and sand spreader. Cjdoxgvbzepfx Ah Usri

Condition: as good as new (ex-display), Year of construction: 2017, Energreen forestry flail had 1.50m working width for Robomax Codpoigzdpjfx Ah Ueri demo unit as good as new

Condition: used, mileage: 1,200 km, power: 200 kW (271.92 HP), first registration: 09/2025, fuel type: diesel, Year of construction: 2025, Equipment list: * Axle ratio i = 6.377 * Differential lock on front axle * Trailer brake, dual-line * Rear mounting brackets * Comfort steering (electrohydraulic power steering) * Front mounting plate EN15432-1, Type F1/C * Wheelbase 3,150 mm * VarioPilot (dual steering, left/right interchangeable) * Side underrun protection * Air-suspended comfort seat with seat heating, passenger side * Air-suspended comfort seat with seat heating, driver side * Additional left stalk switch * Right armrest with control lever mounting, driver’s seat * Plug-in control lever on driver’s seat armrest * Universal bracket for external control unit * Side-sliding center console, additional storage compartment * Air conditioning system * Activated carbon filter * Constant current sockets 12V (C3), 12V and 24V center console * On-board 24V/25A socket in cab, with C3 signal * Front camera * Rear view camera at end of towing vehicle * Monitor for camera system * Universal electrical interface per EN16330 * Battery master switch on battery box * ABS trailer socket 24V, 7-pin / 5-pin * Trailer socket 12V, 13-pin * Front socket 24V, 7-pin * Reversing warning system * Cab strength compliant with ECE-R-29/03 * Mowing door on right and cab prep for mower seat * External sun visor, transparent * Clear, heated windscreen * Transmission oil cooling, oil/air * EasyDrive (hydrostatic drive) (SN) * Automatic Shift (EAS) * Hydraulics for tipper body * age, 2-circuit, 3-cell, full prop, snowplow relief * Tipping cylinder * Rear hydraulic coupling, 4-way, cell 1+2 * Pressure line at rear, 2nd hydraulic circuit * Separate return line at rear * Hydraulic quick couplings ISO 7241-1 A / ISO 5675 * Implement carrier series * Compaction stage (4-5) 11 UG1 300/400 medium * Compaction stage (6) 0 * Compaction stage (7-8) 12 chassis LL * UNI-TOUCH operating system with 10.5" touchscreen * Combination instrument, 12.7 cm, with video function * Digital tachograph, 2nd generation, version 2, ADR * Tachograph manufacturer: VDO * Seatbelt warning, driver and passenger * Warning light for telescopic cylinder * Digital radio with USB port and Bluetooth * Truck Data Center 8, base * Driver assistance card, Europe region * Pre-installation for Truck Data Center 8, base * AdBlue tank 25 l Csdpfx Ahowtgyqe Usri * Warning beacons, LED, yellow, left and right, with tripods * Additional LED high beam, roof bar mounted * Work lights, upper cab rear panel, LED * Additional, height-adjustable headlights on A-pillar, LED, heated * Engine OM936, inline 6, 7.7 l, 200 kW (272 hp), 1,100 Nm * Engine specification Euro VI, E * High Performance Engine Brake * Clean-Fix rapid radiator cleaning system * Engine PTO including front PTO * Dropside body, internal dimensions 2,385 x 2,075 x 400 * Subframe for dropside body * Increased trailer load, ZAA max. 20t * Heavy-duty tow hitch, large jaw, ring type, 38.5 mm bolt * Flatbed rims 10.00V-20 * Warning stripes red/white, retroreflective * Warning triangle and beacon * Attention Assist * Traffic Sign Assist * Tire pressure monitoring system * Sideguard Assist 2 * Frontguard Assist * Pre-installation for alcohol interlock * First aid kit * Weight variant 14.0 t (7.1/8.0) * Vehicle version according to GSR, phase B * Manufacturer’s warranty: 2 years from initial registration/commissioning * Instruments/labels/manuals in German Other notes: * Trade-in and purchase of vehicles and machines possible. * Sales price excludes transport * No liability for typographical and printing errors. * S

Condition: used, Year of construction: 2013, operating hours: 8,682 h, power: 164 kW (222.98 HP), gearing type: other, maximum speed: 80 km/h, first registration: 04/2013, color: orange, overall weight: 14,000 kg, mileage: 159,883 km, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, axle configuration: 4x4, suspension: steel, number of seats: 2, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle * 1st hand * See photos for condition * Original only 8,682 operating hours * Front. - and rear PTO * Municipal hydraulics front and rear * Front mower * Mulag boom MRS300 * Mulag RMK1200 verge mowing head * Rear mower * Mulag rear boom MHS800 * with Mulag MK1200 mowing head * Municipal hydraulics & rear hydraulics * Rear power lift * Mulag MRS 300 verge mower * Ideal for mowing in areas close to roads in left and right hand operation. - and right-hand operation * 3-point attachment to front linkage * Reach up to 3.00 m * Drive via front PTO shaft * Electric hydraulic control * Mower head relief * Path-dependent automatic sensing system * RMK 1200 verge mowing head * Working width 1,200 mm * Telescopic rear boom Mower MHS 800 * Transverse displacement 1,600 mm * Reach left and right 8.70 m * Automatic terrain scanning * High portal for driving over obstacles up to 3.90 m * One-hand control panel with multifunction lever * Quick-change device * Mulag MK 1200 flail mower head * Total width 1,580 mm * Boom utilization * Comfort cab with 2 seats * Air conditioning * Front windshield heating Cedpfx Ahjvhqbcs Ueri * Outside temperature display * Comfort driver seat * Heated electric mirrors * JCB Power Shift transmission with three powershift steps * Disc brakes * ABS * Differential lock * Rotating beacons * Wide warning lights * Working lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor agricultural tractor * Wheelbase: 3,000 mm * GVW: 12,000 kg * LOF registration * When selling to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146 Crsdexf U N Uopfx Ah Uoi

Condition: excellent (used), Year of construction: 2024, 158 USED BCS 740 single-axle tractor. Manufactured in 2024 - machine under warranty. Crjdpfx Ahoxgqrbj Uji Warranty: 2 years. EQUIPMENT: - flail mower - operator's trolley - engine housing - hour meter - quick coupler - aluminum ramps

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth - Wear plates Crsdpfxsw I Ar Ro Ah Usi - Scraper floor bars - Scraper floor chains - Flail tips - Flail holders - And much more.

Condition: new, functionality: fully functional, Year of construction: 2021, working width: 1,200 mm, NIUBO / MAXER KXS-0 120 FORESTRY MOWER ROTOR FOR MOUNTING ON CRANE (>8T) - Belt drive - Forestry rotor with continuous blades - Counter blade - Axial piston motors - HBC system (hydraulic adjustment motor) - Support legs with replaceable wear plates - Chains and rear protective rubber - Front hood with hinges Cedpfx Ahjxlfvro Usri - Protective chains around working parts - Flat mounting plate - Accident protection according to EU standards - Hydraulic hoses 1.50 m long Older stock unit – new

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation Crsdpsxcxmljfx Ah Uoi * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: new, empty load weight: 860 kg, maximum load weight: 2,640 kg, overall weight: 3,500 kg, loading space length: 3,550 mm, loading space width: 200 mm, loading space height: 1,690 mm, tire size: 195/50r13c, *Low loader *construction machinery transporter tandem *for construction machinery, excavators, platforms, scissor lifts and many other vehicles. Hapert builds extremely stable *car trailers* such as this INDIGO LF-2 355x169cm. The *construction machinery trailer* is easy to load via a very stable lattice access flap. An absolute *universal trailer* not only for construction equipment but also for transporting lawn mowers, tractors, bulk goods and small vehicles. Full-length and accessible wheel arches make it easier to get out of a wheel loader. Here, the driver no longer damages the mudguard of the *car trailer*. The *machine transporter* is equipped with a stable lattice flap, parabolic suspension, automatic support wheel, accessible wheel arches, extremely stable welded and hot-dip galvanized frame and V-drawbar. We also offer accessories for machine transport trailers such as bucket storage, aluminum floor, tarpaulin with frame, lashing straps and anti-theft devices at a reasonable price. Credpfen E Rm Ejx Ah Usi

Condition: new, machine/vehicle number: h3105ms03, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brushwood up to 3 cm Ø - Suitable for excavators from 2 to 5 tonnes - For mounting on various quick-attach plates - Floating mounting (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit’s oil flow - Housing made of wear-resistant AR400 steel - Front chain guard - Rear guard made of rubber - Reinforced support roller with double tapered roller bearings, height-adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammer flails (standard) - 9 pieces, spare part no. 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - with flow control valve and DRAIN SAFE TM motor protection valve to protect the motor in case of misuse - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic flow in l/min (min-max): 35 – 60 Optional: MS03 adapter plate incl. bolts and installation = €530.00 net Crsdpfomiiytex Ah Uji Three hydraulic lines are required: pressure, return, and drain. The device is supplied without hoses and fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very wide range of Seppi M. products in stock and available for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. We will also gladly provide you with a financing offer upon request. We are an official sales and service partner for Westtech, OilQuick, Holp, Magni telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB construction equipment, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted!

Condition: ready for operation (used), operating hours: 8,211 h, functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper from First Owner Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out by us free of charge prior to sale. Machine version equipped with the new drive pedal system 4,301 sweeping hours 8,211 total operating hours 60,430 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive system Reversing camera Swept material container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low-emission Euro 5 Fuel tank capacity: approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Credpfxewwhyto Ah Uoi - Circuit 1 (front): 0–50/0–70 l/min, 225 bar - Circuit 2 (rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Additional attachments from HAKO such as broom sweeper, snow plow and lawn mower possible (not included with delivery) Errors, subject to change, and prior sale reserved We sell exclusively under our general terms and conditions and exclude any warranty. Errors, subject to change, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm without interruption, Saturday by appointment; outside these hours, appointments by phone are possible. We are happy to accept your current used equipment/vehicle as trade-in. Sales to commercial customers and exporters are given preference, this applies to our entire vehicle inventory. The above information is non-binding. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 2007, power: 1 kW (1.36 HP), gearing type: other, first registration: 09/2007, overall weight: 550 kg, mileage: 1 km, empty load weight: 500 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, emission class: none, Equipment: all wheel drive, * Dücker verge mower RSM13/2 * Mowing width 1.30 meters * Mowing head inclination from center position 30° * Cutting system: Flail shaft * Transport width: 2.40 meters * Working speed up to 8 km/h * Max. forward delivery: 3.20 meters * Max. outreach from the center of the vehicle 3.60 meters * Year of construction: 2007 If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Credpfx Aexawy Ejh Uei We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2022, condition: as good as new (ex-display), Can be attached to wheel loaders and various implement carriers as well as McConnel Robocut or other tracked mowers Standard with hydraulic swivelling device via 2 heavy hydraulic cylinders (constant speed in both directions) Controlled via remote control of the carrier vehicle HEAVY-DUTY piston motor with freewheel and pressure relief valve for safe milling at the load limit Hydraulic motor optimally matched to the milling unit Crsdpfx Ahekvnaws Uoi Large swivel range enables wide-ranging work without awkward manoeuvring Flexible working even in areas difficult to access HARDOX milling wheel ergonomically shaped for a large cutting depth Maintenance-friendly design Hydraulic hoses as standard Hydraulic requirements: 1x supply line, 1x pressure-free return line, 1x pressure-free leakage oil line to tank

Condition: ready for operation (used), operating hours: 7,808 h, functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Vacuum Sweeper Citymaster 1600 – 1st Owner Crsdpfx Ajxcaageh Uoi Comprehensive engine inspection with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system - 3,952 sweeping hours - 7,808 total operating hours - 51,892 kilometers - 4x4 all-wheel drive – hydrostatic all-wheel drive system - Reversing camera - Debris hopper made of stainless steel - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible total weight: 3,500 kg - Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm - Travel speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Adjustable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low emission Euro 5 - Fuel tank: approx. 60 liters - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min at 225 bar, Circuit 2 (rear) 0–20/25/30 l/min at 195 bar - Hydraulic service brake with foot pedal - Cabin with air-suspended driver's seat - Air conditioning / heating - Water treatment system - Fire hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - Other applications possible via additional HAKO attachments such as sweeper brushes, snow plow, and lawn mower (not included in scope of delivery) - Subject to errors, changes, and prior sale We sell exclusively based on our general terms and conditions and exclude any form of warranty. Errors, modifications, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. without interruption. Saturdays by appointment. Outside these hours, appointments by phone are possible. We gladly accept your current used equipment/vehicle as a trade-in. Sales are prioritized for business customers and exporters. This applies to our entire vehicle inventory. The above information is non-binding, subject to errors, changes, and prior sale.

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Credpfx Aew U Afwsh Uoi We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), fuel type: diesel, gearing type: other, axle configuration: 4x2, overall weight: 500 kg, empty load weight: 499 kg, maximum load weight: 1 kg, first registration: 06/2008, emission class: none, driver cabin: other, brakes: other, number of seats: 1, Year of construction: 2008, Dücker UNA 200 boom, Including Dücker MKL 10 flail mower, The basic implement is used to hold various implements, Ideal for municipal vehicles such as Multicar-Hansa-Ladog-Boki with corresponding municipal plate, Reach 3.40 meters, Transport width: 1.65 meters, Weight: 500 kg, Displacement of 1.15 meters, The implement can be used on the left, right and in front of the vehicle thanks to a hydraulic drive, Swivel angle implement 140°. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Codpfx Ahsw U Afqs Ueri All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), gearing type: other, axle configuration: 4x4, overall weight: 2,300 kg, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, first registration: 08/2013, emission class: none, color: red, driver cabin: other, brakes: other, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. Crodpfew U Afkjx Ah Usi All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.