Used Flatbed Wood Printer for sale (20,950)

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Gujdpfx Adjvvldus Doi Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2019, operating hours: 14,400 h, Type of fuel: Diesel Gujdpfoxwib Ajx Ad Doi Number of owners: 1 Technical condition: good Visual appearance: good Infeed: 16 cm Please contact Jonas Francken for more information

Condition: good (used), Year of construction: 2022, Type of fuel: Petrol Empty weight: 1.450 kg Technical condition: good Visual appearance: good Water tank volume: 30 l Transport dimensions (LxWxH): 0,267x0,118x0,239 Please contact Christian Theißen for more information Manufacturer: Först Model: TR6D Year of build: 2022 Guodsxgp H Dopfx Ad Dei Condition: Used Data: Roller diameter: 150 x 200 mm Total dimensions LxWxH: 2,67 x 1,18 x 2,39 m Drive type: Benzin, 31,3 kW/ 42 PS Dimensions funnel WxD: 3405 x 2627 mm Hopper loading height: 2295 mm Engine: Doosan Tank volume: 30 Liter l Weight: 1.450 kg Special features: Caterpillar shredder with chain drive. Feed roller system: FörstGrip, flywheel system: top open flywheel (640x25 mm) Two 8" knives, no-stress system: Auto Intelligence, feed system: Auto Intelligence, fully water and vibration-proof touchpads. Noise level: Lwa 121dB. Price on demand Location: 41468 Neuss: immediately available

Condition: reconditioned (used), Year of construction: 2020, Agfa Tauro H3300 LED Manufacturing Year: 2020 Mileage: 1.1 million m² (low mileage for such technology. Colour configuration: Six colours (CMYKLcLm) + White Options: Master roll (85.000€ from origin) up to 700KG In and out tables RIP: ASANTI Available: November 2025 Gusdpfxexwbdcs Ad Dji The Agfa Jeti Tauro H3300 is a hybrid inkjet printer with speeds up to 650 m²/h, capable of printing on both rigid and flexible media like vinyl, cardboard, and wood. It offers up to 1200 dpi resolution, multiple color configurations (including optional white, primer, and varnish), and various automation options to support 24/7 production. Key specifications Printing speed: Up to 650 m²/h Media compatibility: Prints on a wide range of rigid and flexible media including: Rigid: Corrugated cardboard, wood, glass, polystyrene, foam board, PVC, etc. Flexible: Self-adhesive vinyl, canvas, PET foils, coated paper, backlit films, etc. Print heads: Piezoelectric Ricoh MH5420 print heads Image quality: Up to 1200 dpi resolution Color options: CMYK 6-color (including white) Optional primer, varnish, and white ink Automation: Multiple options are available, from manual loading to full automation (available as an option) Maximum media width: 3.34 m (131.49 in) Maximum media length: 4.0 m (157.48 in) for the base engine For further technical information please refer to enclosed brochure Installation in Europe available upon request

Condition: used, mileage: 490,114 km, power: 294 kW (399.73 HP), first registration: 05/2008, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 03/2026, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,800 mm, loading space height: 850 mm, Year of construction: 2008, Equipment: air conditioning, crane, Additional features: good condition / fully functional, flatbed/BDF body length = 5853 mm, support legs present, low noise, second-hand, remote control for crane operation, radio CD, lift axle, steering axle, seat heating, electric windows, sun visor, on-board computer, toolbox, disc brakes, German registration, differential lock, comfort suspension seat, green environmental badge, digital tachograph, electric windows and mirrors, rotation servo / stone grab, lashing holes in the outer frame / Multilock outer frame for load securing, tires / double wheels as new! Gedpfx Ajxwwamsd Deui Current location: Zimmerei Fleddermann GmbH & Co. KG in D-49770 Herzlake On-site contact person: Johannes Fleddermann, Tel.

Condition: used, Objet Stratasys Objet30 Prime V3 + cleaning glovebox Technical data: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294× 192× 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material and post-processing method Model materials: Transparent, solid (VeroClear) Solid, opaque, white (VeroWhitePlus) Solid, opaque, blue (VeroBlue) Solid, opaque, black (VeroBlack) Solid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: gebraucht / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Guodpfxory Uhhe Ad Dei We will be happy to answer any further questions you may have on the phone. Written order possible by email or fax

Condition: excellent (used), Type: AM250 / SMC Thermo Chiller HRS024-A-20-T Complete system for metal 3D printing / additive manufacturing Description For sale is a complete metal 3D printing system consisting of: Renishaw AM250 Additive Manufacturing System SMC Thermo Chiller HRS024-A-20-T (MS400) for precise temperature control The system originates from an industrial research environment and was used for additive manufacturing of metal components. The AM250 is renowned for its high process stability, repeatability, and Renishaw’s proven powder bed technology. The accompanying thermo chiller ensures a constant operating temperature and is specifically calibrated to the system. Technical Data – Renishaw AM250 Description / Value Machine Number: 380T38 Control Cabinet No.: AM250 Operating Voltage: 230 V Phases: 1 PH + N + PE Control Voltage: 24 V DC Heating Power: 2 kW Current Consumption: 16 A Operating Temperature: 15°C – 30°C Overload Protection: Circuit Breaker Technical Data – SMC Thermo Chiller HRS024-A-20-T (MS400) Description / Value Model: HRS024-A-20-T (MS400) Cooling Capacity: approx. 2.4 kW Operating Voltage: 230 V AC, 1 phase Gsdpfx Ajxnzu Ajd Doui Temperature Range: 5°C – 35°C Refrigerant: R407C Condition: used Scope of Delivery Renishaw AM250 main unit SMC Thermo Chiller HRS024-A-20-T (MS400) Control and connection cables Control module / Control cabinet (Specifications and data subject to change and error!) We are happy to answer further questions for you by phone.

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Gusdpfjxpux Rex Ad Dji Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture 2021 Technical data: Working space: 380 × 380 × 420 mm (60 648 cm³) External dimensions (WxDxH): 900mm x 950mm x 1950mm Printing system: double extruder equipped with cleaning system Diameter of the filament: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 places for the filament with automatic exchange system Temperature of the print head (max.): 500°C Temperature of the print bed (max.): 180°C Temperature of the working chamber (max.): 180°C (active heating) Temperature of the filament chamber (max.): 50°C Gsdpfx Aot I Dm Ijd Dsui Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Gusdpfx Adsuif Izo Doi Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Gujdpfsqzgvhjx Ad Dji Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Coherent Type: Creator RA (3D metal printer) + Sieve station Retsch AS200 basic (with the following sieves: 2x 63 µm, 1x 200 µm, 1x 250 µm) Sandblasting unit Reitel Sanduret 2 S Ultrasonic device Allpax Palssonic UD22 Wet vacuum cleaner Ruwac NA7-11 H (ex-protected) Various accessories (approx. 15 new steel build platforms, 1x spare filter, coater blades, original packaged build material approx. 22 kg 17-4PH) Gedpfx Ajwupvkod Deui Technical data: Printer requires new license and PC Laser power: Yb: Fiber 250 W, wavelength 1070 nm. Build platform: 100 mm x 110 mm (diameter x height) Dimensions: 717 mm x 858 mm x 1794 mm Accuracy: Repeatability (x, y, z = 15 µm), typical accuracy 40 µm, minimum feature size (x, y = 80 µm, z = 20 µm). CREATOR® RA supports titanium, aluminium, and non-reactive materials. Sieve station Retsch AS200 basic (with the following sieves: 2x 63 µm, 1x 200 µm, 1x 250 µm) Sandblasting unit Reitel Sanduret 2 S Ultrasonic device Allpax Palssonic UD22 Wet vacuum cleaner Ruwac NA7-11 H (ex-protected) Various accessories (approx. 15 new steel build platforms, 1x spare filter, coater blades, original packaged build material approx. 22 kg 17-4PH) File formats: STL, STEP, IGES, Object. Electrical requirements: 230 V/1 Ph/50 Hz/16 A. Condition: used Scope of delivery: (see pictures) Weight: 360 kg (Changes and errors in the technical data and information are reserved!) We are happy to answer further questions by phone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Gsdpfxeu Ebybe Ad Doui Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Stratasys Objet Model: Objet350 Connex3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build Volume: 342 × 342 × 200 mm Layer Thickness: 0.016 / 0.030 mm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and Weight: Gsdpow Idt Aefx Ad Djui 1400 × 1260 × 1100 mm; 430 kg Cleaning Station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Elastomeric: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-like materials: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR print head system PolyLog material management system Incl. digital color options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection 2024! Scope of delivery: (see photo) (Specifications and data subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Gujdenkalgspfx Ad Dji Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Gujdjqy Edyjpfx Ad Dji Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Gedpfeu Ebt Ujx Ad Dsui Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Guodpfxshb Dtps Ad Dsi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley Guodpsft R Swsfx Ad Dji 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: Guodpfek Hz Nqox Ad Doi The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) Guedpfx Adjwnpbgj Doi We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Gusdpsivpdwefx Ad Dei Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Godpfx Aju Ebufed Dsui Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Guedpsu Ebv Ajfx Ad Doi Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Godpfx Adoqzgvas Dsui Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.