Used Forge-Plate for sale (12,109)

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Plate thickness 110mm Bodpfx Aefpgp Ejglslc Hole diameter 45mm Weight approx. 2.0 tons

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal Bodpfx Agowk Rlxjljlc machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, total length: 640 mm, total width: 640 mm, total height: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! Bljdsxqqlcepfx Aglec The machine is being auctioned due to the liquidation of a business. Submitting a bid binds you to timely collection between 26/01/2026 and 29/01/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 640 mm x 640 mm x 1,500 mm Weight: 150 kg EQUIPMENT Height gauge Vice with 100 mm jaw width

Condition: used, functionality: fully functional, machine/vehicle number: 7FBMF35-16267, Year of construction: 2013, operating hours: 6,500 h, load capacity: 3,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, Electric Forklift Truck – Toyota Year of manufacture: 2013 Technical data: • Model: Toyota 7FBMF30 Bjdpfx Agow Hhwwoljlc • Load capacity: 3,000 kg • Drive: Electric (battery powered) • Mast type: Triplex with free lift • Lift height: approx. 4,300 – 4,800 mm • Fork length: 1,070 mm (standard) • Tyres: Solid rubber • Cabin: Open design, optionally with driver protection roof • Condition: Used, serviced and fully functional

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T Bedpfx Ash Auaheglslc

Condition: used, Cast iron bed Length: 2300 mm Width: 1900 mm Bledpfx Ajwtc Hgogloc Thickness: 200 mm Height on feet: 980 mm 5 T-slots horizontal and vertical T-slots dimensions: 60 x 35 mm Square dimensions: 365 x 365 mm Crack at a longitudinal T (see photo) Weight: approx 3 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm Blsdpfx Aowlhd Uoglsc 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Bjdpfx Agoig Hu Njljlc Weight: approx 3 T

Condition: used, Cast bed Length: 2410 mm Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm Bsdpfx Aewnfz Noglelc 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T Bodpowlhflsfx Aglelc

Condition: used, Used Seitz Enzinger Noll reportedly model 60/150 type C stainless steel filter press. Unit has (67) 600mm x 600mm stainless steel plates and (1) stainless steel end plate which will accomodate (66) filter sheets giving approximately 22m2 filtration area. Unit is type C with central tightening device via spindle and capstan handle. Bljdpoygu Unefx Aglec

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Blodpoyg Icrsfx Aglsc Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4510mm Width: 1815mm Height: 400mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm Bsdpfx Aoyg Hx Eoglslc T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Height: 310mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Height: 350mm No. Of T-slots: 5 Bsdjxdwwfepfx Aglelc Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm

Condition: excellent (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector, NH fuse base -Manufacturer: Klöckner Moeller, adapter plate, 2 pieces, unused, original packaging Bljdpfx Ajyg Dtaegljc -Type: A-GSTA2/50 400A -Item No.: T 8250025 -Quantity: 1x box with 2 pcs. available -Cardboard dimensions: 260/235/H115 mm -Total weight: 2.6 kg

Condition: excellent (used), Year of construction: 1990, overall weight: 17,500 kg, total height: 500 mm, total length: 6,000 mm, total width: 3,000 mm, plate width: 3,000 mm, Floorplate Length:6000mm Floorplate Width:3000mm Length: 6000mm Bjdpfeygwa Tjx Agljlc Width: 3000mm Height: 500mm Weight: 17500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Bsdjygw Epepfx Aglslc Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: excellent (used), Year of construction: 2011, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Width: 1800mm Bedoygvwdjpfx Aglelc Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Blsdjxdltuopfx Aglsc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, First registration: 23/05/1980, vehicle identification number: 10628, permitted gross weight: 40,000 kg; NOTE: The low loader’s registration documents are missing. A statutory declaration of loss by the owner, required for the application of new documents at the relevant road traffic authority, is available and will be handed over to the highest bidder or buyer of the low loader! Blodpfx Agsyf R Easlec

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm Bsdpfx Agoygm Tiolelc machine weight ab. ca. 600 kg kg

Condition: used, machine/vehicle number: 16072, Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm Blodpfx Agsh Axk Ielsc 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querformat / Long/landscape format: 311 x 434mm 64 %, Lang/Querformat: Long/landscape format:287 x 370mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, Druckplatten - Entwicklungsmaschine / Plate Processor AZ FEYear 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video Bljdpfeh Ax R Ujx Agljc We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm Bledpfx Ageupy S Njljc 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Hydraulische 4 Plattenspresse - Hydraulic 4 Plates Press Lechner IV B Baujahr / Year 1976 - Serial-No. 1214 4 Pressplatten  / Size with 4 pressure plates Pressfläche / Press size: 1 Pressplatte / 1 Press Plate 440 x 280mm - 2 Pressplatten / 2 Press plates 610 x 440mm Pressdruck regulierbar / Pressure adjustable max. 6000KG Platzbedarf  (Höhe-Breite-Tiefe) / Place require 140 x 155 x 51cm Gewicht / weight 780kg Elektr. Antrieb / eletric power 400 Volt, 3 Ph, 50 Hz., 1,1 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bsdpfewhgaasx Aglolc