Used Plates Sage for sale (11,670)

Condition: used, (15) Angle plates as detailed. 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate Hjdpfx Absyi Tbfjrefc 112789 800mm x 750mm x 1190mm Angle Plate 112791 600mm x 500mm 1800mm Angle Plate

Condition: used, Steel floor plates Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Hfjdpfx Asxxqypebroc Weight: approx 2 T 3 same plates available.

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition Hfodpfx Absuprqworsc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Hfedpfx Ajygw Epebroc Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm Hfedpfxet Tqkds Abrjc table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° cutting angle adjustment 1- 2,5 ° back stop - adjustable 0- 1000 mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment is possible. System 3R - Presetting station measuring plate (granite plate) on base cabinet System 3R-US060 Including guide rail (reference element WEDM) 350 mm long Granite plate by MYTRI (accuracy 0.003 mm) Dimensions: 747 x 717 x 895 mm Weight: 158 kg Hjdpfxoyi T Nve Abrefc - Including WEDM 3R-272 HP pendulum head for mounting SuperVice vise, holder or fixture in the WEDM system. - Including SuperVice Magnum 3R-292.6HP vise - Including Magnum WEDM 3R-26610 pendulum head See pictures Shipping and inspection possible!

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm Hsdpfx Ajft Tciobrsfc -Weight: 1250 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences Hfedpexwmycjfx Abrsc CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment Hfedpsxwmv Djfx Abroc cutting angle adjustment

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, Darley hydraulic guillotine shear type GS 3116 working width 3050 mm max sheet thickness 16 mm Delem NC control type DAC 350 motorized backgauge automatic angle adjustment automatic cutting gap adjustment rear side equipped with transport conveyor Hfjdpfoxpuipsx Abroc

Condition: used, stroke rate (max.): 28 1/min, sheet thickness (max.): 4 mm, Hydraulic Guillotine Shear Make: HERA Model: HSS 3 2500x4 Year: 1981 Hedpfx Aswvi Ebsbrefc Technical Specifications Manufacturer: Hera Model: HSS 3 Working Length: 2500 mm Capacity: 4 mm Passage: 2600 mm Throat Depth: 200 mm Strokes: 28 min⁻¹ Motor Power: 5.5 kW Dimensions: approx. L 3.10 x W 2.00 (plus support arms) x H 1.40 m Weight: approx. 4 t Equipment • Motorized back gauge with digital display 1000 mm • Angle gauge 1000 mm • 2 support arms • Central blade gap adjustment • 1 spare blade Details provided without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2019, sheet width 2050 mm plate thickness 2 mm strokes per minute until 38 cutting angle 1,75 ° table height over floor 870 mm total power requirement 3 kW weight of the machine ca. 1520 kg range L-W-H 2,2 x 0,6 x 1,2 m Demo machine at a special price: The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a standard geared brake motor via a chain connection to the main axle. the knives are of the highest quality. The optimal cutting angle secures the together with the sheet holder perfect cuts. Hfedpfovn Al Hsx Abrjc Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille. Plus freight + packaging 270,--. We also have a Kapema manual swing bending machine, model KFS 20/20, with a segmented top rail for bending box sections. Please send us your inquiry if you are interested. This is a demonstration machine at a special price, so we are selling it without any warranty. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, sheet width 1290 mm plate thickness 5 mm pre-bending ja roll diameter 120 mm roll speed 1 - 6 m/min total power requirement 1,1 kW weight of the machine ca. 825 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m². Hfedpsvzhgpjfx Abrec

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Hsdpfxstq I Rqo Abrjfc Machine dealer with own stock of 1600 m².

Condition: new, sheet width 2050 mm plate thickness 3 mm strokes per minute until 35 cutting angle 2,0 ° table height over floor 870 mm thickness at "Niro-steel" 2 mm total power requirement 4 kW Hfedpsvdfmxofx Abroc weight of the machine ca. 1550 kg range L-W-H 2,5 x 1,57 x 1,21 m The new motor guillotine type SMP is a well dimensioned machine with all-welded link guides. The drive takes place with a Standard geared brake motor via a chain connection to the main axle. the Knives are of the highest quality. The optimal cutting angle secures the Together with the blank holder perfect cuts. Bearings and guides are maintenance and lubrication-free. Standard equipment: • Back gauge 665 with mm scale. • cutting edge lighting. • Section counter. • Table extensions 600 mm. • Right angle stop, left. • Movable 24 V foot switch with emergency stop. • Motor protection switch and emergency stop. • 2 cutting edges per knife. • Rear protective grille, warranty = 12 months for single-shift operation. Other models: 1275 x 3mm, 1250 x 4mm, 2050 x 2mm Machine dealer with own stock of 1600 m².

Condition: new, Universal panel transport assistant Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Hfjdjw I Uz Repfx Abrec Height-adjustable panel transport assistant Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Weight: approx. 8 kg Availability: in stock Storage location: Hochheim

Year of construction: 2010, condition: used, machine/vehicle number: 0302-250004, Kaltenbach KBS 1010 - KDS 1015 drilling saw line, year of manufacture 2010 The Kaltenbach drilling saw line is a combination of a Kaltenbach KBS 1010DG double miter bandsaw and a KDS 1015 profile beam drilling line and a T13 transport system. Hfsdpfeyildisx Abrjc

Condition: excellent (used), Face plate and clamping disk (2858) Diameter 440 mm Camlock mounting 133.4 Cone diameter 106.39 Height of face plate 50 mm Weight 28 kg Hfodpfx Astup Trebrsc

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 Hfsdpjxdigfjfx Abrjc - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2003, overall weight: 8,200 kg, total height: 450 mm, total length: 5,370 mm, total width: 2,100 mm, plate height: 450 mm, plate width: 2,100 mm, groove spacing: 300 mm, Floorplate Length: 5370mm Floorplate Width: 2100mm Height: 450mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 41mm Weight a plate approx.: 8200kg Number of matching pieces: 1 Length: 5370mm Width: 2100mm Height: 450mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hsdpfx Ajyg Igdobrjfc

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Hodpfx Abjyg Icrersfc Number of matching pieces: 1 Length: 4510mm Width: 1815mm Height: 400mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Hfedpeyg Hx Ejfx Abroc Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Height: 310mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Hedpsxdwwfjfx Abrofc Height: 350mm No. Of T-slots: 5 Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm Hedpfxjyh D Nnj Abrjfc plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m

Condition: excellent (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, line switch, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector, NH fuse base -Manufacturer: Klöckner Moeller, adapter plate, 2 pieces, unused, original packaging -Type: A-GSTA2/50 400A -Item No.: T 8250025 -Quantity: 1x box with 2 pcs. available Hfjdpfjyg Dtasx Abrjc -Cardboard dimensions: 260/235/H115 mm -Total weight: 2.6 kg