Used Plates Sage for sale (12,442)

Condition: reconditioned (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, plate height: 950 mm, Granite Plate (CEJ) - Dimensions 1200x800x180mm - Quality Class 00 (incl certificate) - with steel cabinet - surface refurbished Nodpfxjxluf No Aatswn

Condition: used, sheet width 2500 mm plate thickness 3,0 mm distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t Nwedpfx Aeyv I H Deatsn dimensions 3,3 x 1,4 x 1,8 m

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch Nsdpfx Ajxyln Roatewn - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 1994, sheet width 3050 mm plate thickness 16 mm distance between columns 3050 mm 15-1000 mm cutting angle adjustment ja ° cutting gap adjustment ja mm connected load 30 kW weight of the machine ca. 14,.5 t dimensions of the machine ca. 4,0 x 260 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment Nsdpfxexz Hg Ds Aatjwn - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Njdpoxabuysfx Aatown - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles Nsdexabvqjpfx Aatjwn - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Nwjdpfx Aoxm Sageaton -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates Njdpfezycpxox Aatewn - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Nwsdpozbqqusfx Aaten Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control Nwedpfxjzkty Aj Aatjn programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm Njdpszkvx Iofx Aatewn column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: as good as new (ex-display), Year of construction: 2024, 1-meter manual rolling mill with 3 rollers, featuring a disengageable roller. Robust cast iron structure. Rolling capacity: 1020 x 1.5 mm in mild steel. High-strength steel rollers. Professional roller with 3 asymmetric rollers. Retractable top roller at the front for easy removal of the rolled piece. Bottom roller adjustment via handwheel and eccentric. Rear roller height adjustment via handwheel, with the option to tilt the roller for conical forming. The bottom and rear rollers are equipped with various grooves for winding mechanical wires or small components. Nsdpfsz Dugzex Aatown Gear transmission.

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input Nwodpfx Ajzn Ahdoaton * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: new, sheet width 1050 mm plate thickness 3 mm distance between columns 1100 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. Nwodpofv H Dgefx Aatjn The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm Nwjdjibq Itepfx Aaton sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: new, max. 16 mm Nwjdpfxjvn U Elo Aaton square edge steel 16 mm round bar steel 16 mm weight 45 Kg 180 ° dimensions 0,4 x 0,4 x 1,1 m

Condition: new, sheet width 2070 mm plate thickness 10 mm Nwjdovn U H Aopfx Aatsn pre-bending 8 mm total power requirement 7 kW weight of the machine ca. 5 t dimensions of the machine ca. 4050 x 1470 x 1550 mm

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Nwsdpfxoz I A Ubo Aatsn Weight: approx 3 T

Condition: good (used), Year of construction: 2019, Steel plate and chain belt conveyor Nwsdpszzx Erjfx Aaten Manufacturer: FMW Förderanlagen GmbH Year of manufacture: approx. 2019 Total length: approx. 45,000 mm Width: approx. 2000 mm For sale is a steel plate and chain belt conveyor with a total length of approximately 45 meters and a width of approximately 2 meters. Please refer to the drawing for detailed specifications. The conveyor is currently assembled and can be inspected upon request. Disassembly is not included in the price.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, FICEP GEMINI MODEL HP25 BED SIZE 10000mm x 2500mm DRILLING HEAD with 6 station automatic tool changer. 80mm CAPACITY. HYPERTHERM HPR 260XD 65mm MILD STEEL CAPACITY. Nedpfx Aajz Hfcxetjwn GE FANUC CNC CONTROL YEAR OF MANUFACTURE 2011.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 like-new manual plate seat re-grinding machine, Petschauer PLT800, with a cutting-off device for repairing HM teeth on circular saw blades with a diameter of 100 to 800 mm. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding of the plate seat after unsoldering with a ceramic grinding wheel, 175 mm Ø and 4 mm wide, with an adjustment scale from 15° negative to 35° positive, with blade thickness adjustment. Left side: Cutting off teeth that are too long with a diamond cutting disc, 150 or 175 mm Ø, approximately 1 mm wide. Adjustment scale for back clearance angle, 15° negative to 35° positive. The cutting-off process is performed at a 0° axial angle. Additional applications: Setting the tooth back Setting the raker on CMT saw blades Breast grinding using a diamond grinding wheel Njdpfjzz Rlkjx Aatjwn Re-sharpening on the saw blade circumference at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Ø Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm, Depth: 72 cm, Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Ø Diamond cutting disc: 150 or 175 mm Ø Operating voltage: 230/400 Volt, 3 phases, 50 Hz or 230/440 Volt, 3 phases, 60 Hz Protection: 3 slow-blow fuses, 10 A

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, length of the shorter conveyor table – 1300 mm, width – 1900 mm Nwjdez Szpyopfx Aaten length of the longer conveyor table – 6050 mm, width – 1630 mm length of the roller table – 1900 mm, width – 1630 mm length of the turning table – 4400 mm, width – 1600 mm year of manufacture: 2018 maximum speed: 20 m/min

Condition: used, Zanussi N7RE Electric Griddle with Open Base – Used Nodpfxexvy Hys Aatjwn With 2 heating zones, each 4.2 kW Working temperature of each heating zone adjustable from 120 - 280°C via thermostat Griddle surface tilted 1.5° forward for grease drainage 1.5 mm thick front and top plate made of stainless steel, side and rear panels made of stainless steel Scotch-Brite finish, edges rounded on both sides IPX4 – splash-proof Standard equipment includes a grease collection tray and a 3-sided stainless steel splash guard With height-adjustable feet (+50 mm) External dimensions (W x D x H): 800 x 700 x 850 mm Plate dimensions (W x D): 730 x 540 mm Cabinet (W x D x H): 680 x 640 x 420 mm Weight: 80 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Aluminum measuring table with a 50 mm aluminum plate and drawer cabinet. - Type: Measuring table with aluminum measuring plate Nodpfehvmkiox Aatswn - Dimensions: - Width: 80 cm - Depth: 75 cm - Height: 95 cm (97.2 cm high with frame) - Aluminum plate: 5 cm thick, with threaded holes Manufacturer of drawer cabinet: Garant (Hoffmann Group) - Number of drawers: 2 - Material: Aluminum - Condition: used Complete factory clearance sale, large selection of storage mezzanines, pallet racks, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and power tools. More items - new and used - can be found in our shop! International shipping costs available upon request!

Condition: good (used), functionality: fully functional, For sale is a little-used round bending machine. Nwjdpjz R Txlefx Aatsn The maximum sheet metal width allowed is 1750 mm. Included as accessories are a set of rolls for thin sheet metal and a set of rolls for thick sheet metal. The machine can be inspected in working order in DE-84051 Mettenbach by appointment. Sale only to commercial buyers and with the exclusion of any warranty! The buyer must dismantle and collect the machine.