Used Form-Attic for sale (6,559)

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs Bwsdpfx Afozqhgdsxst The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg Bodpfxet Hw Nmj Afxowt dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: good (used), Vacuum Filler Line Make: Handtmann Model: VF200 Bwjdpjznkfdsfx Afxet Complete with loader *With Handtmann Meatball forming attachment*

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 960540, GIC 3100 bagging machine direct from closed salad factory. In nearly new condition but has had it's electronic components removed (we will replace these with new direct from GIC). Large choice of tooling available. Bwodpfxjyx Na Re Afxjt

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Bwjdjyvav Njpfx Afxst

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Bsdpfxoyvau Es Afxswt

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Bedpfx Ajwztmtjfxjwt

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Bwsdpjywpblsfx Afxet

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Bwodpfx Asvtcqgofxet

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, workpiece length (max.): 1,000 mm, workpiece width (max.): 700 mm, workpiece height (max.): 400 mm, year of last overhaul: 2025, GF AgieCharmilles FORM 30 Year of manufacture: 2015 AC FORM HMI control Bwedpfx Aszi A Dbefxjt Travel ranges (X/Y/Z): 600 x 400 x 400 mm Max. workpiece dimensions: 1200 x 700 x 400 mm Max. workpiece weight: 1000 kg Work table dimensions: 800 x 600 mm Max. electrode weight: 25 kg Integrated C-axis, rotational speed U = 0-100 1/min Min./Max. distance between table and chuck: 250-650 mm ISPG generator with 80 amps Best surface finish: Ra 0.1 µm 6-position electrode changer in magazine Operation via 15" LCD screen with mouse Handbox for manual machine setup Machine dimensions: 2700 x 1600 x 2858 mm Total weight: 4400 kg After receiving your order, the machine will be cleaned, serviced, and tested at our facility. We would be happy to offer you the following options: - Transport - Commissioning and training - Clamping devices - Dielectric fluid

Condition: good (used), Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection Bwodpfjvrdk Sjx Afxst -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 5 pieces available -Price: per piece/ 95€ for the whole set. -Dimensions: 310/150/H400 mm -Weight: 6.6 kg/piece

Condition: good (used), CNC drawbar, tool holder, tool holder, milling tool holder Bwjdpfx Afsd D Iq Nexet - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

Condition: used, CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders Bedpfx Afjb Hbxtsxjwt -Thread: M16 -Price: complete -Weight: 0.6 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Ideal machine for very flexible bags (Vol up to 60 Liters) Impusl sealing for PE-Films Bagsize up to 420 (option 550) mm and baglenght 800mm control operated via touchscreen terminal and recipe management. Bwodpfx Aox I D Tkjfxet Machine is in very good condition.

Condition: used, Anvil with round and pointed horn Bwsdpfx Afjzinw Hoxot Anvil, North German design Track width: 140 mm Track length: 440 mm (with pointed horn) Horn length, round horn: approx. 200 mm Horn length, pointed horn: approx. 200 mm Overall length: 630 mm Height: 285 mm Foot: 290 x 210 mm - Steel casting, hardened - Square hole approx. 28 mm for anvil tools - Round hole, approx. 28 mm diameter Dimensions (L x W x H): 630 x 290 x 285 mm Anvil weight: 95 kg Good condition, very bright tone, good quality.

Condition: new, Cam-driven spring forming machineCam-driven spring forming machine Bwjdpfx Aomb Uurefxst

Condition: good (used), Heiber Schröder CE Speedformer Tray forming machine Single-track machine, manufactured by Heiber & Schröder, Germany. Year of production: 2022. Bjdpfx Afjzlafhexewt Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE foil), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a cold glue system.

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Bedpfxjzlad De Afxewt Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs Bwodpfxjztwx Uo Afxst The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: good (used), Year of construction: 2011, For Sale: Konig Industrie Rex I 6/5 row Range: 33 - 95 grams Year of construction: 2011 Very well maintained Diagrams available + Hopper with oil system + Spreading belts Please note: the power unit is missing. (New price of the power unit approx. €10,000) However, it is possible to connect this Rex directly to a proofer that does have a power unit. Transport can be arranged. Bedpfx Ajw Edmfjfxswt Inspection possible on-site. Price: €35,000,- EXW If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, input voltage: 230 V, type of input current: AC, input frequency: 50 Hz, DGUV certified until: 08/2027, Electric Spritzkuchen Machine Electric-powered Spritzkuchen machine Model: ESFG with wall mount Bwodpfx Aey H Ur Usfxjt DGUV V3 certified stepless adjustment 230V connection, plug-and-play Used machine Option: Quarkbällchen (curd cheese balls) Spritzkuchen (Spritz cookies) Ringkrapfen / Donuts

Year of construction: 1996, condition: ready for operation (used), A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible. Bwjdpfx Afjzpyytjxot

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines Bwsdpfxjy Ttrme Afxet The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Condition: ready for operation (used), Year of construction: 2004, A HD Wiegetechnik multihead weigher with a Deltapack vertical form fill and seal machine is available. 1) HD Wiegetechnik HDW 10 3.5 multihead weigher, year of manufacture: 2004, hopper volume: 3.5l/head, weighing heads: 10, controller: MD 400 E. 2) Deltapack DE 420 FU vertical form fill and seal machine, year of manufacture: 2004, max. film width: 740mm, longitudinal seal length: 540mm, cross seal length: 430mm, sealing jaw width: 450mm, machine dimensions X/Y/Z: approx. 2300mm/1550mm/1800mm. Documentation available. An on-site inspection is possible. Bodpfxjznx Hvs Afxjwt

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Kallfass Universa 500 with shrinking tunnel from Hugo Beck Kallfass Universa 500, year of manufacture 2011. The system is immediately available. The price of the complete system includes the Universa 400. The machine has been technically overhauled and is in very good condition. Technical data: - Length of transverse sealing bar: 500mm - Sealing bar opening: max. 200mm - Min. product length: 80mm Bsdpfx Aezn Up Tsfxewt - Automatic length adjustment to reduce the sealing bar gap - Film guide plate, available as an option - Control: Siemens S7-300 - Operator terminal with Siemens TP270 - Sealing bar with replaceable sealing element - Side sealing knife - Processable films: PE and PO - Year of manufacture: 2011 - Shrinking tunnel Hugo Beck Transverse and side sealing have been inspected and overhauled. Infeed, outfeed, and transport belts are inspected and replaced if necessary. The machine is available after inspection and repair. Installation of the system is included in Germany, Austria, and Switzerland. Fully automatic flow wrapping machines for packaging products – regardless of their length – in a complete wrap and without film overlap. The product is fed via a conveyor belt and simultaneously inserted into a half-tube film via a forming shoulder. The product is detected by a light barrier. The feed belt can be easily adjusted to different product widths. After the product is wrapped with film, transverse sealing is carried out with a continuously heated sealing system. Longitudinal sealing is created by a continuous side sealing unit. The height of the forming shoulder and the sealing units can be adjusted manually. The remaining strip of film is collected on a film reel. If required, we also offer installation and service for this system or systems from other manufacturers. Subject to prior sale. The price is EXW. No guarantee for technical data.