Used Format 4 Perfect 80 for sale (59)

Condition: used, Year of construction: 2016, Sawblade tiltable 45 ° Length of the rolling table 3200 mm cutting width 1250 mm Used Machine Year of manufacture: 2016 Condition: like new, only 5.5 operating hours Features and technical specifications: - Saw unit can be tilted up to 45° - 3 speeds: 3,500/4,500/5,500 rpm - 7.3 kW S6 motor - Cutting length: 3,200 mm Bwodpezk N T Ssfx Afxet - Cutting width: 1,250 mm - Cutting height: max. 133 mm Electric height adjustment - X-Motion screen control with 5.7-inch monitor Controlled rip fence - Parallelogram safety guard, height-adjustable, can be swung out of the work area; maximum saw blade diameter 400 mm - Dust extraction port 80 mm - Scoring unit 1.1 kW, 8,500 rpm with 2 axes - Crosscut fence with 2 digital jaws - Tool compartment for 5 saw blades - Degree grid index with length compensation for the extension table - Rip fence with digital display and automatic length compensation when the saw blade is swiveled, fence length 1,200 mm, swivels out of the way

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,200 mm, Equipment: CE marking, saw blade guard, Format 4 Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment: 202 mm - Positioning control for tilt adjustment: 90°–45° - Crosscut fence 3200 mm, 2 fence stops - Outrigger table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Cutting width 1250 mm - Overhead guard, extractable and height adjustable, can be swung out of the working area (not shown in the pictures but available) - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and angle adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel Bodpfx Afoy Hk Swjxjwt - Weight: 1300 kg Price ex location Transport available at extra charge!

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Bedpfxjyux Ego Afxowt Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Bjdpsztbutsfx Afxowt Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Further technical data: Fence: 1100 mm Milling table opening: 320 mm Extension table: 1100 Milling fence for tool diameter max.: 250 mm Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) Bwedezmh Nkspfx Afxjt 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm 212 Swiveling device for feed

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, operating hours: 6,000 h, travel distance X-axis: 3,550 mm, travel distance Y-axis: 1,680 mm, travel distance Z-axis: 275 mm, feed rate X-axis: 80 m/min, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel range X axis: 3,550 mm Travel range Y axis: 1,680 mm Travel range Z axis: 275 mm Main spindle max. speed: 24,000 rpm Working area X axis: 3,060 mm Working area Y axis: 1,210 mm Working area Z axis: 100 mm Bwsdpeyc Smgsfx Afxet Speed X: 80 m/min Speed Y: 80 m/min Speed Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction port diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 positions, traveling Side pick-up station for 2 tools Traveling pick-up station for aggregate/tool HSK F63 14 vertical drilling spindles (9 in X and 5 in Y direction) 6 horizontal drilling spindles (4 in X and 2 in Y direction) 1 grooving saw (4-10 mm), arranged on X-axis 1 main spindle HSK F-63, 9 kW Preparation for 0-360° C-axis 6 consoles for holding vacuum clamps Traveling laser for vacuum suction cup positioning 2 working areas for pendulum operation Handheld terminal Automatic central lubrication Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: like new (used), Year of construction: 2023, For sale is a used Format4 Kappa 450 panel saw with a cutting length of 2800 mm. The machine is used as an exhibition model in our showroom and is therefore in new condition. Technical data: - Cutting length 2800 mm - Cutting width 800 mm - Cutting height 155 mm - Max. saw blade diameter 450 mm - Electrically adjustable in height + swiveling - Dust extraction port Ø 120 mm - Motor power 7.5 kW / 10.2 HP - Year of manufacture 2023 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw, Format Bsdpfxszv R U Uo Afxowt Reference: R-D1618

Condition: used, Year of construction: 2019, New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Spindle power: 12 kW, 24000 RPM * Number of axes: 4 * X-axis travel: 4000 mm * Y-axis travel: 1670 mm * Z-axis travel: 500 mm Technical specification * Spindle power: 12 kW * Spindle speed: 24000 RPM Additional information * Working area (maximum table size) * X: 3300 mm * Y: 1280 mm * Z distance: 250 mm * Spindle: * Tool interface: HSK F63 * Rated power at: approx. 12,000 RPM * Cooling: Air-cooled * Rotation: CW / CCW * Tool magazine * Linear tool magazine (side-mounted): 12 positions * Additional linear magazine on the portal: 4 positions * Max. tool diameter: 250 mm * Max. tool length: 300 mm * Drilling unit * Model: DH 24 6H 2S * Vertical spindles: 18 (12 in X, 6 in Y) * Horizontal spindles: 6 (4 in X, 2 in Y) * Max. drill length: 70 mm * Max. tool diameter: 10 mm * Nut sawing machines: 2 (X and Y) * Max. saw diameter: 120 mm * Max. speed: 6,000 RPM * Vacuum table * 6 supports (instead of 4) * Two-circuit vacuum system * Height of vacuum suction cups: 100 mm * Pneumatic support locking * Adjustable side stops (Y-axis) * Axis system * X-axis: Rack and pinion drive * Y/Z-axis: Ball screw drive Bwjdpfx Afszuxi Rexet * Linear guides in all axes * Automatic central lubrication * Control and software * CNC control with CAD/CAM software * 3D simulation preview * DXF import function * Parametric programming * Remote maintenance package (internet-enabled)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 408 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 50 mm, number of axes: 3, total height: 1,950 mm, total width: 1,500 mm, overall weight: 850 kg, product length (max.): 2,100 mm, This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Ph • Frequency: 50 Hz • Current: 22 A • Power: 7.0 kW • Duty Cycle: S6 40% • CNC Drilling Center c-express 920 classic • Clamping Collet System for CNC Through-Feed Technology • Drilling, Sawing and Milling Operations from Below • Laser "0" Double Reference • Drilling Head: DH15 • 6 Vertical Drilling Spindles • 9 Horizontal Drilling Spindles • 1 Grooving Saw in X Direction • Graphical User Interface • Machine Software License: 1 • CE Conformity • Maximum Workpiece Dimensions (X × Y × Z): 3000 × 920 × 50 mm • Minimum Workpiece Dimensions (X × Y × Z): 280 × 180 × 10 mm • 19" LCD Color Display • Mouse and Keyboard Bwedozuhctjpfx Afxot • Packed on Pallet: 2100 × 1500 mm Tools: • HW circular saw blade 100 × 5 / 3.6 × 20 Z24 / FZ • DP end mill D12 / NL23.5 / Z2+2+Q / GL80 / S20 / RL • ER32 collet, Ø20 mm • Drill bit Ø5 mm LL (3×) • Drill bit Ø5 mm RL (2×) • Drill bit Ø8 mm LL (4×) • Drill bit Ø8 mm RL (3×) • Through drill bit Ø5 mm LL (1×) • Drill bit Ø15 mm RL (1×) • Drill bit Ø35 mm RL (1×) • End mill Ø8 mm (1×) • End mill Ø10 mm (1×)Upon request, we can also offer suitable extraction systems (currently eligible for funding in Germany) and compressed air solutions

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Format4 Bwsdpfxjzux Rbj Afxot Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm Bedpfx Afozug Hqoxjwt • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote service package (internet-ready)

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 Bwedjzvca Aopfx Afxet • Main Motor: 9 kW • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 • Total Connected Load: 15 kW

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, number of blades: 4, overall weight: 1,050 kg, chip removal: 10 mm, extraction nozzle diameter: 160 mm, jointer table length: 1,050 mm, Standard equipment: - Star-delta starter - Planer shaft with 120 mm cutting circle - Speed: 5000 rpm - 4-knife system planer shaft (knife length 635 mm) - Electric height adjustment for thicknessing table - Electronic digital display - Sectional pressure beam at feed - Spring-loaded pressure beam at outfeed - Spiral-toothed steel feed roller, Ø 85 mm - Micro-toothed steel outfeed roller, Ø 85 mm - Variable feed gearbox, 5–20 m/min Optional equipment: 008: 10 HP (7.35 kW) motor 010: Star-delta starter 012: Volt-free contact 060: Thicknesser with DigiDrive position presetting 061: Rubber-coated infeed transport roller, 630 mm 063: Rubber-coated outfeed transport roller, 630 mm 065: Second rubber-coated outfeed roller, 630 mm 224: Table extension with material support roller Bodpfxjy N Ufas Afxewt Whether in carpentry workshops, solid wood joinery, or modern furniture production – the new Format4 exact 63 thickness planer impresses in all areas. Further technical data: - Planer shaft: 4-knife system planer shaft - Thicknessing height: 3 mm – 300 mm - Thickness height adjustment: electric - Feed system: Variable feed gearbox, 5–20 m/min.

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Bwjdpfx Afszcymhsxjt Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. Bwedjzlbpbjpfx Afxjt - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Bsdpfx Afsvph Hxexjwt

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a used Format4 jointer-planer machine with a jointer length of 2250 mm. The machine has been inspected by our specialist staff and is in as-new condition. Technical data: Jointer/planer width 510 mm DUAL foldable jointer tables Silent Power cutterblock Planing height 4-250 mm Variable feed rate 4-16 m/min 10 HP (7.35 kW) motor Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Bwodpfx Ajwnd T Rsfxot Related terms: jointer, planer, thickness planer, jointer, planer Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, Affordable CNC technology is becoming increasingly important, especially for versatile craft businesses. Whether standard products or individually designed one-offs, the all-purpose Format4 CNC machining center profit H200R produces both single pieces and large series with maximum efficiency and delivers immediate value from day one. With its newly redesigned appearance, the profit CNC machining centers from Format4 convey dynamism, power, and the latest high-end technology at first glance. The new machine frame with massive steel ribbing guarantees maximum stability during peak performance. With a wide selection of various tool changers and perfectly integrated Format4 software, the new FORMAT4 CNC machining center is a reliable complete package for the production of doors, windows, stairs, and solid wood furniture starting from batch size 1. Optional Equipment C15 Enclosed drag-chain for cable management in X and Y axis C29 Mobile operator terminal instead of fixed terminal C42 Safety system with pressure-sensitive mats incl. pendulum mode C58 Monitoring of stop cylinders for 6 workpiece supports C70 Continuous stop rail in the Y direction, 2 pcs. C81 Preparation for 0–360° C-axis C85 Tool changer with 12 tool positions on the left C98 Optical machine status indicator C99 Blue LED light strip C101 Vacuum suction cup FA 125 x 75 x 100 mm C103 Vacuum suction cup FA 140 x 115 x 100 mm C135 6 workpiece supports instead of 4 424 F4Integrate – Lamello Clamex P macro module C490 F4design (incl. 3-axis post processor) C601 F4Design initial equipment bonus 800 E-learning F4Design Machining Area H200 13.33 Axis Travel Range X = 4000 mm Y = 1670 mm Z = 500 mm Working Area X = 3300 mm Y = 1280 mm Z = 250 mm clearance height from the console level, depending on clamping system (see layout) Axis Positioning Speeds Depend on the selected safety system (refer to layout for details). Equipped With High-performance PC 24" LED color display Keyboard, mouse, and mousepad 1 USB interface Bwedowztuqjpfx Afxst Including delivery and setup in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89 Including 3 days of software training in Leutkirch

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Bedszuyh Ispfx Afxewt Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: ready for operation (used), Year of construction: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Upper and lower polishing unit Bwsdozuhb Nspfx Afxst Machine Benefits Technical Machine Benefits • Positioning workpiece height adjustment: 8-60 mm • Turntable magazine diameter: 750 mm for edging material 0. 4-3 mm in roll • Rotary magazine of edging material with ball bearing, diameter of plate: 740 mm • Gluebox application unit • Trimming unit with two motors: 0. 35 kw (1 ps), 12000 rpm hw saw blades, z 24, d-100x20x3. 2 mm, pneumatic tilting 0°-10° • Upper and lower multifunctional milling unit // upper and lower profile sander x-motion plus for machining plastic edges 2 and 3 mm • Controlled corner unit with 2 motors, motorized adjustment for milling the front profiles of the upper/lower edge for edge thicknesses of 0. 4-3 mm and feed rates up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed ​​12000 rpm, 2x 1. 5 kw • Edge and workpiece thickness measurement using bluetooth technology Extra Information Power supply: 3x400V 50/60Hz Chain feed with 2 gears, Feed rates: 10 and 18 m/min Control Unit x-motion Plus control with 15' SmartTouch

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 Bwjdozux Iaopfx Afxjt 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, pivoting range: 46 °, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: Bwodpfx Afowztr Njxet - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm Bwodpfjy Dawksx Afxst motor power 7,35kW angle regulated fence year 2008 iron cast tables

Condition: ready for operation (used), Year of construction: 2013, overall weight: 4,600 kg, Panel saw manufactured in 2013. This FORMAT4 Kappa Automatic features a robust design with a weight of 4,600 kg and a powerful 14.0 kW motor. It includes an integrated control terminal with monitor, keyboard, and mouse, along with safety wire fencing and roller material support tables. If you are looking to get high-quality panel cutting capabilities, consider the FORMAT4 Kappa Automatic machine we have for sale. Contact us for further details. Bsdpjzx Uv Uofx Afxjwt - Voltage: 400 V- Phase: 3-phase- Frequency: 50 Hz- Power: 14.0 kW- Current: 28.0 A- Weight: 4,600 kg

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This FORMAT4 Finish 1302 features two internal sanding belt units with pneumatic tensioning and adjustment controls. It includes an analog control panel with dual ammeters, a digital height indicator, and a vacuum/perforated conveyor bed for efficient operation. If you are looking to get high-quality sanding capabilities, consider the FORMAT4 Finish 1302 machine we have for sale. Contact us for further details. Bodpfx Aezyak Hefxswt - Voltage: 400 V / 3-phase / 50 Hz- Power: 32.0 kW- Amperage: 64.0 A- Sanding Units / Stations: 2 internal sanding belt units (P80 and P60 setup with pneumatic tensioning and adjustment controls)- Control Panel: Analog panel with dual ammeters, digital height indicator (Gefran), feed/speed selectors, emergency stop button, key switch