Used Fp3 for sale (118)

Condition: used, Technical details: Type: Deckel FP3 / 4A-TC with Contour 3 Dkodpfx Aksyhwh Tscsn Year of manufacture: 1987 In 2025, a new power supply unit and a new ballast circuit were installed The tool changer magazine is no longer in operation.

Condition: ready for operation (used), Siemens 1FT6044-4AF71-3SH2 servo motor SN:YFP319647102021, the motor was overhauled at Siemens, used, normal signs of wear, 100% functional, scope of delivery as per photos Dkedpfx Akji D Tg Docen

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. Dksdpfx Akoza E Rascsn An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.

Condition: used, machine/vehicle number: 1621, x-travel:800 mm y-travel:300 mm z-travel:400 mm table-size:1000 x 440 mm Tool taper:SK40 spindle speeds:40 - 2000 U/min Djdpfx Aeh Ra Nqokcskn speed steps work spindle:18 spindle speed max.:( 6000 Possible by interchanging the Belt U/min feed range:10 - 500 mm/min feed steps:18 total power requirement:3 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:1600x1550x1930 m The models FP3L has a tilting Spilndle Head can be swiveled 90° left or right direction for vertical and horizontal machining application. - With Rigid Angular Table: 1000 x 440 mm (6 nos of "T-Slots" with of 12mm width) - With 2 Step Dial Configaration for Quick changing on Speed and Auto Feed - Quick Lever for rapid traverse movement on all axis - Universal Table , Separate power cabinet, and Chip tray

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Deckel FP3 NC Universal Milling Machine - CNC Djdpecxxypsfx Akcjkn - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3A DIALOG 11 with 3D path control, including accessories Technical data: >> Machine no. 2820-1119, year of manufacture approx. 1990 >> Fixed angular table >> Speed: 31.5 - 6300 rpm >> Feed drive: 2 to 3600 mm/min >> Rapid traverse: 6000 mm/min >> Drive power: 7.0 kW >> Measuring system accuracy: 0.001 mm >> Travel distances X/Y/Z: 400/400/400 mm >> Vertical and horizontal quill, hydraulically operated - SK40 >> Quill stroke, vertical: 80 mm >> Weight: approx. 2000 kg Accessories and equipment: Dodoy S U E Eopfx Akcokn >> Control system: DIALOG 11 >> Machine lamp >> Coolant system >> Central lubrication >> Operating manual, parts list, electrical diagrams >> Tool cabinet with accessories: vise, milling cutters, tool holders, clamping tools, collets, ground shims, three-jaw chuck and much more About the machine: For sale is a Deckel FP3A universal milling machine in very good condition with 3D path control, Dialog 11. The guides are in very good condition. The machine is equipped with a tool cabinet containing a wide range of accessories. The FP3A comes from a large company and was only used occasionally. It has been mechanically and electrically inspected. Take advantage of the opportunity to inspect and test this machine on site while it is powered up.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length Dkedpsd Nnwljfx Akcen -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition Djdpfxov R E Rdj Akcokn

Condition: used, machine/vehicle number: 2055, up to 2000 rpm, T-slot table size 1000 mm x 400 mm, with 3-axis digital readout HEIDENHAIN Dodpfx Asy Sqi Hjkcekn

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 Djdpfx Aksxuh Rdjcjkn With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: reconditioned (used), Year of construction: 1975, functionality: fully functional, 3-axis digital readout FAGOR Year of manufacture: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable quill Dsdpsyw H Eujfx Akcekn Milling cutter guard enclosure Machine lamp Various tool holders SK 40 Chip tray Coolant system 4 pcs. machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION !!!

Condition: not inspected (used), Please see technical details on photo. Dkedpohvzxzjfx Akcsn

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Dksdpfstdnb Eox Akcon Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Year of construction: 1982, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted Dkodpfx Akjpn Rgvjcjn RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,352 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200x50-10, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, sideshift, COMBILIFT C4000 – 2016 | 4352 MTH | DIESEL | DUPLEX 4050 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Are you looking for a machine that will not stop your production? ⚙️ This COMBILIFT C4000 is a proven unit after a full service – ready for immediate operation, with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection) ✔ Technical & visual condition: like new ✔ Only 4352 MTH – low operating hours ✔ New tyres – no additional investment required --- ### Key specifications ✔ Capacity: 4000 kg ✔ Diesel drive ✔ Duplex mast – 4050 mm ✔ Fork positioner: 3100 mm ✔ Forks: 1100 mm ✔ Full cabin --- ### Technical details ✔ Year: 2016 ✔ Weight: 6400 kg ✔ Load centre: 600 mm Dsdpfsy U U Hbox Akcskn ✔ Lifting height: 4050 mm ✔ Dimensions: * Length: 1230 mm * Width: 2620 mm * Height: 2400 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, wide fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- ### Ideal for ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industry ✔ Handling of long loads ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate use ✔ Online presentation available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that sit in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Pan-European experience ✔ Hundreds of satisfied clients

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,352 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200x50-10, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, sideshift, COMBILIFT C4000 – 2016 | 4352 MTH | DIESEL | DUPLEX 4050 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Are you looking for a machine that will not stop your production? ⚙️ This COMBILIFT C4000 is a proven unit after a full service – ready for immediate operation, with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection) ✔ Technical & visual condition: like new ✔ Only 4352 MTH – low operating hours ✔ New tyres – no additional investment required --- ### Key specifications ✔ Capacity: 4000 kg ✔ Diesel drive ✔ Duplex mast – 4050 mm ✔ Fork positioner: 3100 mm ✔ Forks: 1100 mm ✔ Full cabin --- ### Technical details ✔ Year: 2016 ✔ Weight: 6400 kg ✔ Load centre: 600 mm ✔ Lifting height: 4050 mm ✔ Dimensions: * Length: 1230 mm * Width: 2620 mm * Height: 2400 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, wide fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- ### Ideal for ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industry ✔ Handling of long loads ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate use Dksdpfx Akjy Uyxvecen ✔ Online presentation available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that sit in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Pan-European experience ✔ Hundreds of satisfied clients

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 4,352 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200x50-10, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 10,400 kg, empty load weight: 6,400 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, sideshift, COMBILIFT C4000 – 2016 | 4352 MTH | DIESEL | DUPLEX 4050 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Are you looking for a machine that will not stop your production? ⚙️ This COMBILIFT C4000 is a proven unit after a full service – ready for immediate operation, with no hidden costs. ✔ Fully serviced (oils, filters, complete inspection) ✔ Technical & visual condition: like new ✔ Only 4352 MTH – low operating hours ✔ New tyres – no additional investment required --- ### Key specifications ✔ Capacity: 4000 kg ✔ Diesel drive ✔ Duplex mast – 4050 mm ✔ Fork positioner: 3100 mm ✔ Forks: 1100 mm ✔ Full cabin --- ### Technical details ✔ Year: 2016 ✔ Weight: 6400 kg ✔ Load centre: 600 mm ✔ Lifting height: 4050 mm ✔ Dimensions: * Length: 1230 mm * Width: 2620 mm * Height: 2400 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, wide fork positioner Dkodpfoy S Ev Isx Akcon ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- ### Ideal for ✔ Narrow aisle warehouses ✔ Timber, steel and pipe industry ✔ Handling of long loads ✔ Indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work solution: ✔ Fully tested before sale ✔ Ready for immediate use ✔ Online presentation available ✔ Transport available --- ### Why FT LOGISTICS? We deliver machines that work – not ones that sit in the workshop. 🚀 ✔ 100+ machines available ✔ In-house service & preparation ✔ Pan-European experience ✔ Hundreds of satisfied clients

Condition: excellent (used), Deckel FP 3 Milling Machine 3-axis digital readout FAGOR Innova 30i-M, new 500 mm 300 mm 380 mm SK 40 drawbar thread S 20 x 2 Vertical milling head Dsdpfxeymffks Akcokn 40 – 2,000 rpm, 18 speeds Universal table 800 x 420 mm 12 mm approx. 1,500 kg approx. 1,400 x 1,800 x 1,900 mm Centralized manual lubrication Coolant system Operating manual Completely overhauled by Harich in 2000!

Condition: like new (used), Year of construction: 1996, Retrofitted: 2023 Dkedeyf Rtdepfx Akcsn Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mmY axis traverse: 1800 mmDistance between columns: 1680 mmZ axis traverse: 800 mm Milling head Head type: Standard vertical spindleTool clamping system: HydraulicTaper nose: ISO 50Speed range: 20 - 2000 r.p.m.Spindle power: 22 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Max Weight on table: 10000 kgMachine weight: 21500 kgMachine dimensions: 7300 x 2690 x 3400 mm Accessories Guarding: YesCoolant: ExternalElectronic handwheel: HR-330 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, control Dialog 4 x-travel 400 mm y-travel 315 mm z-travel 400 mm spindle tunring speed 3.150 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dksdpfx Akjyyqp Ascjn Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Format: 310 x 432mm Equipment: Dksdpfxox N I Uhs Akcen roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 33700 € 643.67 € 30 to 2 mm 400 mm 600 mm 150 mm 1 - 60 mm 140 1/min 4 60 mm 40 mm 200 mm 300 mm 3 kW 1300 mm 1150 mm 2050 mm 1670 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Dksdpswirbxefx Akcon Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Options: vibrations pads € 132,- bolster plate € 720,-

Condition: good (used), Tool milling machine DECKEL FP 33 incl. 3-axis digital readout / Heidenhain Dsdpfey Efyaex Akcjkn - Three-axis digital readout Heidenhain - Technical data sheet: see image - Various accessories - Crane - Documentation Dimensions (LxWxH): 2x5x2x2.8 meters / Weight: 4500 kg Errors and input mistakes excepted.

Condition: used, Year of construction: 1984, machine/vehicle number: 2804-1181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 450 mm, table length: 700 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 32 rpm, Used DECKEL tool milling machine model FP 3A CNC Table size: 700x450mm, spindle taper SK40 DIN 2080, Travel paths: X/Y/Z = 500/400/400mm, spindle speeds from 31.5 to 3150 rpm (21 working spindle speeds), feed rate 5-1250mm/min, rapid traverse in X, Y and Z 2500mm/min, coolant system and machine feet. Djdpsyrnvvofx Akcskn Year of manufacture: 1984; the machine was overhauled by Harich in 2010. The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us.

Condition: excellent (used), Semi-automatic pallet wrapper Inv. no. 3583 Manufacturer: Filma Model: FP 30 ES * Turntable positioning via fixed stop * Programmable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 3200 mm!!!! * Own weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! * With access ramp * In very good condition!! Dksdsyx Ex Ajpfx Akcsn