Used Fs 520 for sale (3,285)

Condition: ready for operation (used), Year of construction: 2008, A Baader refiner for the separation of soft and solid components is available. Throughput capacity: approx. 800kg/h, connected load: 3kW, drum hole diameter: 1mm, machine dimensions X/Y/Z: approx. 1100mm/900mm/1300mm, weight: approx. 450kg. An on-site inspection is possible. Bedpeygmbgofx Ag Iscw

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Bcsdpfx Aoyab Nfjg Ijw

Condition: ready for operation (used), Year of construction: 2014, There are 2 identical Grasselli membrane skinning machines available. 1) Year of construction: 2013, working width: 520mm, dimensions X/Y/Z: approx. 700mm/700mm/1000mm. 2) Year of construction: 2014, working width: 520mm, dimensions X/Y/Z: approx. 700mm/700mm/1000mm. On-site inspection is possible. Bcsdpfxjt Hxfij Ag Ijw

Year of construction: 1989, condition: ready for operation (used), Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible. Bcjdpfxov Exrws Ag Iew

Year of construction: 2006, condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Bodovnd Tlopfx Ag Iecw

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling Bjdsycnf Sopfx Ag Ijcw :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: new, Year of construction: 2025, Planer OPTIMAT SOLID W 520S with a spiral shaft Min. material thickness 10 mm max. material thickness 75 mm Planing width 520 mm Min. workpiece length 150 mm Min. workpiece width 10 mm Total length of the table 2750 mm Receiving table length 1200 mm Length of the feeding table 1500 mm Bedpfx Aelvuqfog Ijcw Shaft length 520 mm Shaft diameter 121 mm Shaft rotation 5000 rpm Time to shaft stop less than 10 s Number of knives 126 Knife dimensions 15 x 15 x 2.5 30° Guide dimensions 1200 x 190 mm Guide inclination from 90° to -45° Motor power 5.5 kW Table height (from the ground) 845 mm Diameter of the extraction spigot 120 mm max. cutting depth 8 mm Sound power level 99.2dB(A) Weight 800 kg

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Bsdpfxev D Nxlj Ag Ijcw Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: used, Year of construction: 2001, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t Bodpfx Agew Syc Io Iscw dimensions of the machine ca. 2900 x 1953 x 1825 m

Condition: excellent (used), Year of construction: 2018, operating hours: 8,511 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 3,570 mm, fork width: 570 mm, total height: 1,920 mm, color: other, GVW: 3.320 kg Lifting capacity: 3.300 kg Bjdpfx Agoyhd Ruj Ijcw Battery 48V 6PzS 930Ah 2022, 380V charger, Fork size 3570 x 570 mm, NEW wheels, Tandem fork wheels, Reconditioned lifting system, Reconditioned steering,

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, New High-Precision Surface Grinding Machine, Kraft brand, Type FS 16060 SD Grinding area: 1600 x 600 mm Main Technical Data - Grinding length: 1,600 mm Bcedpsyak H Hsfx Ag Iow - Grinding width: 600 mm - Distance from table surface to spindle center: 820 mm - Table drive: Hydraulic - Table load (incl. magnetic chuck): 1,230 kg - Table speed, infinitely adjustable: 5–25 m/min - Max. table travel: 1,700 mm - Max. cross feed speed: 2,000 mm/min - Maximum cross travel: 610 mm - Max. vertical feed speed: 2,000 mm/min - Grinding spindle motor: 22 kW - Grinding wheel dimensions: 500 x 75 x 304.2 mm - Grinding spindle speed: infinitely variable - Machine weight (net): 8,500 kg - Machine width: 7,500 mm - Machine depth: 3,400 mm - Machine height: 2,700 mm - Electrical connection: 400 V / 50 Hz Features: see attachment. Standard Accessories: - 1 Standard grinding wheel 500x75x302.4 mm - 1 Standard wheel flange - 1 Wheel dresser incl. diamond dresser - 1 Balancing arbor - 1 Balancing stand - 1 Machine lamp - 1 Set of machine tools - 1 Documentation package incl. spare parts list - Machine in CE version (Metric version) Equipment features: - Surface grinding machine with automatic vertical feed - Grinding cycle: roughing – finishing – spark-out - Siemens S700 touchscreen panel and electronic handwheel for Y-axis - Digital readout for vertical axis Y and cross axis Z - Grinding spindle drive 22 kW (including stepless speed regulation) - Electro-magnetic chuck combination (L 1600 x W 600 mm) - Magnetic plate supply unit - Coolant filtration system (incl. coolant tank, paper band filter, and pressure pump) Installed special accessories: - 1 Additional wheel flange for 500 x 75 x 302.4 mm grinding wheel - 1 Full enclosure. Completely closed machine cover with manually operated sliding doors incl. safety interlock - 1 Wheel dressing unit mounted on the spindle head (for straight dressing of the grinding wheel) - 1 Coolant mist extraction unit incl. base frame Precision and surface quality at an optimal price. Fully equipped and ready for grinding, suitable for universal use in a wide range of industrial and application sectors.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, New High-Precision Surface Grinding Machine of the “Optimal” Series Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding process: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital readout on vertical axis Y and cross axis Z ● Table cover and splash guards made of stainless steel ● Electrical control cabinet mainly equipped with Siemens components ● Including handwheel dressing device, electro-magnetic chuck, and coolant filtration system Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load capacity kg 180 Longitudinal movement X Table speed, infinitely variable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. traversing speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. traversing speed mm/min 460 Grinding spindle/grinding wheel Grinding spindle drive power kW 2.2 Grinding wheel dimensions mm 200x20x31.75 Grinding spindle speed (speed control optional) rpm 2850 Dimensions Net machine weight kg 1800 Machine dimensions (incl. table movement) Width mm 2300 Depth mm 1650 Height mm 1680 Bcsdpfx Agjyak Dlo Iew Power connection kW 3.7 All models include standard accessories: ● 1 standard grinding wheel ● 1 wheel arbor ● 1 dressing block incl. diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation including spare parts list ● CE-compliant machine (metric version) Precision and surface quality at an optimal price. Fully equipped for universal use in a wide range of industrial and application sectors.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, conveyor belt width: 520 mm, total width: 1,200 mm, total length: 1,030 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 520 mm, type of input current: three-phase, Dough Sheeter Sinmag SM 520 F Proven, advanced technology – tested and reliable in numerous applications! Easy manual operation Suitable for all dough types for sheeting and laminating Tables can be folded up Adjustable sheeting thickness: 1 to 30 mm Sheeting width up to 520 mm Conveyor belt length: 2x 980 mm Standing machine, mobile, with dough roller DGUV V3 safety tested exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 1030 mm D x 1200 mm W Used machine, cleaned & SAB-inspected Warranty and spare parts service included Options: Trailing conveyor Felt belt Bsdpfx Aoyakkrjg Ijcw Maintenance contract Service package Spare parts box Delivery service Commissioning and operator instruction

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls Bedpfx Ajx A Dy Reg Ijcw 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Bedpfx Agjx Tgr Tj Iecw Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1988, functionality: fully functional, Surface grinding machine Geibel&Hotz Type FS 40 Primus SA Condition: good Bodoyh Hutopfx Ag Iscw Fully functional

Condition: ready for operation (used), Year of construction: 2013, operating hours: 54,526 h, screw diameter: 35 mm, This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Bcodpfxjx D Rk Ee Ag Iow • Operating voltage: 400 V 3~, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V~ • Motor/heating rated current: 90/69 A • Total rated current: not specified • Total connected load: 89 kW

Condition: good (used), functionality: fully functional, conveyor belt width: 520 mm, total width: 2,500 mm, total length: 900 mm, input voltage: 400 V, table length: 1,000 mm, input frequency: 50 Hz, DGUV certified until: 01/2027, electrical fuse: 16 A, opening width: 30 mm, working width: 520 mm, space requirement length: 900 mm, space requirement width: 2,500 mm, type of input current: three-phase, Dough Sheeter Fritsch Rollfix Model: 3 WK 520 simple manual operation suitable for all dough types for sheeting and laminating tables fold up mobile dough sheeting machine Dimensions: 900 x 2500 mm D x W in working position Connection: 400V, 16A-CEE plug Used machine Options: Maintenance contract Service package Delivery service Instruction & commissioning We have additional dough sheeters in stock! Bcedpfxjyaf Uxs Ag Ijw

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (at tel. ...). Iveco S-Way AS260S50Y/FS CM 6x2 BDF swap body chassis Axle configuration: 6x2, 3 axles, trailing (non-driven) axle, cab version AS MY, European emission level, engine: Cursor 13, 500 hp, Euro VIe, transmission: 12-speed HiTroniX (automated), gross vehicle weight: 26 t, drive axle type SR (single reduction), single axle, full air suspension, disc brakes, vehicle version: container chassis CM, vehicle set-up: On, wheelbase: 4,800 mm, engine badge 02307, steel rims, engine speed: 1650 rpm, reverse gears: standard, emission standard: EURO VI E, drive tires: 315/70R22.5, speed limiter: 90 km/h, electric lifting roof, transparent for high-roof MLL, front grille: standard black, manual cab tilting mechanism, front headlights: halogen, front underrun protection for chassis >7,490 kg GVW, first aid kit, plastic bumper, cab attachments: black, AS high-roof cab, standard light grey IVECO logo, cab roof insulation: standard, electronic immobilizer and 2nd vehicle key, dashboard design: plastic with black trim, COC general type approval, digital tachograph 4.1, co-driver’s seat: static, smart generator 2880 W (24V x 120A), demand-controlled, wheel chocks (2 pcs), SR-SOLO LIGHT 17x, standard air tank labels, rear shock absorbers, axle weight variant: front axle 8,000 kg / rear axle 11,500 kg (technically possible 12,000 kg) / trailing axle 7,500 kg (technically possible 8,000 kg), standard total braking, rear axle stabilizer, steel air tank, quantity depending on suspension and trailer version, front stabilizer, exhaust outlet to the left, air filter under cab, lift for trailing/leading axle (TX/P), 2-position ride height adjustment, rear underrun protection omitted, trailer towing version for continuous trailer braking system, end crossmember D-value: 130 kN, 15-pin trailer socket for 24V operation, Connectivity Box 4G incl. TCO service contract, engine idle cut-off, tire pressure monitoring system (TPMS) with internal sensors, VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0, infotainment with 10" TFT display, transmission software: ECO-Roll (coasting function), driver fatigue warning system (Driver Drowsiness Attention Warning), warning triangle (ECE-27 compliant), standard rear lights, hill start assist (Hill Holder), electronic stability program (ESP), reversing monitoring system with camera, blind spot monitoring system (BSIS) right side, intelligent speed assist (ISA), NO HIGH WAY ASSIST, front area monitoring (MOIS), advanced emergency braking system (AEBS), pre-wiring for alcohol interlock device (ALC) with cable, noise specification ECE 51/03, standard EU vehicle width, gearbox 12TX 2660 TD, ECAS air suspension with 2 sensors, NO RADIATOR CONVEYOR, luggage compartment left and right, fog lights with cornering function, exterior mirrors electrically adjustable and heated, transparent external sun visor mounted on the cab roof, auxiliary heating diesel/water 4kW, fully automatic air conditioning with stationary air conditioning, standard refrigerator and storage box, leather steering wheel, bed curtains, signal horn behind bumper... Bcsdpfxjyhyh Te Ag Iew

Condition: new, power: 368 kW (500.34 HP), axle configuration: 6x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you (by phone). Bcsdpfx Ageyhyh Hs Isw Iveco AS260S50Y/FS CM 6x2 BDF Swap Body Chassis Axle configuration: 6x2P, 3 axles, trailing axle. Cab type: AS MY. Emission level: Europe. Engine: Cursor 13, 500 HP, Euro VIe. Transmission: 12-speed HiTroniX, automated. Permissible gross weight: 26 t. Drive axle variant: SR, single reduction, single axle. Full air suspension. Disc brakes. Steered trailing axle, single tires. Vehicle variant: Container chassis CM. Vehicle set-up: ON. Wheelbase: 4,800 mm. Model year: 2024. Engine speed: 1,650 rpm. Emission standard: EURO VI E. Tires: 315/70R22.5. Speed limiter: 90 km/h. Electrically operated roof hatch (transparent with MLL high roof). Standard black front grille. Manually operated cab tilt. Mirror cams with cover on AS. FHS in vehicle color. Front underrun protection for chassis with a gross weight over 7,490 kg. Plastic bumper. AS high roof cab. Electronic immobilizer and 2nd vehicle key. Dashboard design: plastic with black trim. COC: EC whole-vehicle type approval. Digital tachograph 4.1. Air compressor: 2-cyl., 630 ccm, with integrated clutch, demand controlled. Smart generator 2880 W (24V x 120A), demand controlled. SR-SOLO LIGHT 17x. Rear shock absorbers. Weight variants: front axle 8,000 kg / rear axle 11,500 kg (technically possible: 12,000 kg) / trailing axle 7,500 kg (technically possible: 8,000 kg). Standard overall train brake. Front axle stabilizer. Standard applications. Exhaust pipe outlet to the left. Air filter unit under cab. Lift control for trailing or leading axle (TX/P). Ride height with 2 settings. Rear underrun protection omitted. Trailer version for use with continuous braking system. Rear crossmember, D-value: 130 kN. Trailer socket for 24 volt operation, 15-pin. Rear axle ratio: i = 2.31. Connectivity box 4G incl. TCO service contract. Engine idle shutdown. Tire pressure monitoring system (TPMS), internal sensors. VDI interface for telematics services, version 4.0. Infotainment 10" TFT display. Gearbox software ECO-Roll (coasting function). GPS cruise control Hi-Cruise. Drowsiness warning system (Driver Drowsiness Attention Warning). Warning triangle compliant with ECE-27 directive. Hill start assist (Hill Holder) for easy hill starts. Electronic Stability Program (ESP). Reversing camera monitoring system. Blind spot monitoring system (BSIS) on the right. Intelligent Speed Assistant (ISA). Front area monitoring (MOIS). Emergency brake assist (AEBS). Pre-installation for alcohol interlock (ALC) with cable. NOISE ECE 51/03. Standard EU vehicle width. ECAS air suspension with 2 sensors. Speedline aluminum wheels, SLT. Plastic parts of the cab painted in cab color. Left and right luggage compartments. Transparent sun visor mounted outside on cab roof. Additional diesel/water heater, 4 kW. Fully automatic air conditioning in combination with stationary air conditioning. Standard refrigerator and storage box. Leather steering wheel. With curtains at the bed. Signal horn behind bumper (compressed air). Foldable table in passenger area. One-piece lower bed, firmness: hard. Upper bed with continuous mattress. Ashtray in center console. Electrical pre-installation for tail lift operation, ...

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Bcodpfxsx Tg T Re Ag Iow

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 479394, MOTORIZED FORENSIC COMPARISON MACROSCOPE LEICA FS C. YEAR 2019. NEVER USED! Suitable for a wide range of forensic investigations, including ballistic analysis, tool mark examinations, and document comparison. Bcodsyifdcspfx Ag Isw

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Bcsdpfex Uz Edsx Ag Iow Electrical Supply Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Performance Data Power: 24 kVA Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: used, mileage: 984,289 km, power: 382 kW (519.37 HP), first registration: 06/2018, fuel type: diesel, empty load weight: 9,097 kg, maximum load weight: 11,903 kg, overall weight: 21,000 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2018, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Colour: White, Unladen weight: 9,097 kg, gross permitted weight: 21,000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, Velour seats, Full air suspension, Retarder, Digital tachograph, Fifth-wheel coupling: FISCHER SK-S36.20 2/150, -510 mm, EBS – Electronic Braking System, ESP – Electronic Stability Program, Automatic air conditioning, Stand air conditioning (parking cooler), Adaptive Cruise Control ACC, Auxiliary heater with automatic timer, LED headlights, Headlamp cleaning system, Automatic headlights, Headlight leveling, GSM Bluetooth preparation, Rain sensor, Mechanically adjustable steering column, Roof hatch, Roof spoiler, Fog lights, Electrically adjustable and heated exterior mirrors, Electric kerb mirror, Wide-angle mirror, Tyre pressure monitoring system, Immobiliser, Wind deflector, Axle load indicator, Hill Hold Control HHC, LED daytime running lights, 1x15 pin connector, sailing function, Cornering lights, Telematics system, Side skirts, SCR. Bcsdpfx Aoygnubog Iow

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bcedpfx Agjx U Afxs Ijw Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26