Used Fz 0 for sale (87,715)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2004, operating hours: 7,848 h, load capacity: 5,500 kg, lifting height: 5,750 mm, fuel type: diesel, mast type: triplex, construction height: 2,880 mm, fork length: 2,200 mm, additional equipment features: ZVG, Equipment: cabin, sideshift, Hyster H5.50 XM diesel forklift with a load capacity of 5,500 kg, side shifter, and fork positioner (ZVG). The machine has just undergone a full inspection and maintenance by a qualified technician. Hydraulics are tight, no play anywhere! Both the visual and technical condition are very good. The machine is free of defects! Complete maintenance has been carried out. New injection pump, new water pump, all fluids replaced. The forklift is equipped with a cab, heater, diesel particulate filter, and work lights!!!! TRIPLEX MAST with FULL FREE LIFT Tires: Front very good, rear NEW! Technical Specifications & Features: Manufacturer: Hyster Model: H5.50 XM Fuel type: Diesel Operating hours: 7,848 h Year of manufacture: 2004 Load capacity: 5,500 kg Overall height: 2,800 mm Lift height: 5,750 mm Fork length: 2,200 mm Mast type: TRIPLEX Full free lift DPF - diesel particulate filter Side shifter Fork positioner max opening width (outside-outside): 1,220 mm Work lights Cabin with heater Tires: front very good, rear new The machine is free of defects!! Shipping for this unit is possible!!! New safety inspection (UVV) available upon request. Net export possible with a valid VAT number. Dedpfx Alowp R S No Uekn

Condition: excellent (used), Year of construction: 2001, drilling depth: 700 mm, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 6,000 rpm, drill diameter: 40 mm, table length: 1,500 mm, table width: 1,250 mm, table load: 10,000 kg, Year of manufacture: 2001 Control: Heidenhain TNC 430 X: 1600 mm Y: 1200 mm Djdpjxu Dkgsfx Al Ujkn Z: 1600 mm W: 500 mm Table: 1500*1250 mm, 10T B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor with coolant system Tool holder: SK50 Tool changer: 20 positions

Condition: used, Year of construction: 1993, Used machine Dsdpfjw I Ur Nex Al Uskn Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim

Condition: used, machine/vehicle number: VF644AGL000002623, mileage: 615,000 km, power: 158 kW (214.82 HP), first registration: 10/2008, fuel type: diesel, tire size: 285/70 R19.5, axle configuration: 4x2, wheelbase: 4,700 mm, fuel: diesel, fuel tank capacity: 200 l, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 71,000 mm, loading space width: 25,500 mm, loading space height: 25,000 mm, Year of construction: 2008, Equipment: central locking, cruise control, electric window regulation, parking heater, spoiler, tail-lift, = Additional options and accessories = - Cushioned seat - Electric windows - Remote central locking - Sleeping cabin - Sun visor = Remarks = Tail lift: Hollandia 1500 kg, tail lift = More information = Technical information Number of cylinders: 4 Engine capacity: 4.764 cc Drivetrain Engine type: Renault Trucks Optidriver Axle configuration Tyre size: 285/70 R19.5 Front axle: Steering; Tyre profile left: 65%; Tyre profile right: 65%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75%; Suspension: air suspension Weights Empty weight: 7.600 kg Carrying capacity: 4.390 kg GVW: 11.990 kg Functional Tail lift: HOLLANDIA DHLM, tail lift, 1500 kg Layout Dkodpjxfcg Iefx Al Uon Number of beds: 1 Identification Registration number: BV-NJ-74

Condition: new, Year of construction: 2012, total length: 2,780 mm, Tugger Baka EFZ-5,0 Dsdpfx Aexd Ea Usl Uskn Drive Electric Year built 2012

Condition: used, Year of construction: 2014, total length: 4,100 mm, Tugger Volk DFZ 120H Drive Diesel Djdsxd Ey Uepfx Al Uokn Year built 2014

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Dksdsykr Aqepfx Al Usn Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: new, die cushion stroke: 200 Dodpfsd Ab Ikex Al Uokn

Condition: new, die cushion press capacity: 30die cushion returning speed: 52die cushion stroke: 200daylight: 750pressure: 150stroke: 500 Dkodpfxod Ab Ilj Al Usn

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Djdpfxod Ab Ims Al Uokn

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw sweeping brush smooth regulation of feed speed Djdpfx Alsgm Tqwj Uskn weight of the machine: 2700 kg

Condition: used, Year of manufacture 2003 Dksdpfxow Upn Eo Al Uon 2.2 kW 3.0 HP including documentation, COC

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Dkedpfjxp Rgksx Al Uon Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 1 kg, number of slots in tool magazine: 12, controller manufacturer: Fanuc, controller model: 21m 3x / 2x 21iM, coolant supply: 1 bar, number of spindles: 1, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rotational speed (max.): 10,000 rpm, workpiece diameter (max.): 63 mm, Equipment: documentation/manual, rotational speed infinitely variable, 7 units CHIRON FZ08S with 4th axis Peiseler AWU P100 3 machines were overhauled by Chiron CMS in 2016 and 4 machines in 2018, unit price approx. €30,000 each. Dodpovx Ugwjfx Al Uekn

Condition: used, Year of construction: 2002, machine/vehicle number: 204-77, functionality: fully functional, operating hours: 69,840 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, number of slots in tool magazine: 12, controller manufacturer: FANUC, overall weight: 2,200 kg, table length: 550 mm, table width: 300 mm, controller model: 21i-M, torque: 23 Nm, distance table to spindle center: 420 mm, feed length X-axis: 300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 250 mm, mount diameter: 32 mm, nominal power (apparent): 10 kVA, number of spindles: 1, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle speed (max.): 15,000 rpm, spindle speed (min.): 50 rpm, table load: 100 kg, tool diameter: 63 mm, tool length: 160 mm, tool weight: 700 g, Equipment: documentation/manual, rotational speed infinitely variable, CHIRON Vertical CNC machining center FZ 08 W YEAR 2002 Ready for use, partly overhauled, installation and IBM can be offered. Drilling capacity D 16mm Thread cutting M12 Milling capacity 30cm/min Dkjdpfjurb Azex Al Ujn CNC type: Fanuc 21iM 2 pallets 0/180 Spindle revolutions: 10500 12 HSK32 tools Coolant system with chip container Tank capacity 100 liters Pump capacity 60 liters/min at 1 bar Automatic loading door

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, color: orange, number of seats: 1, Year of construction: 2002, Road Marking Machine: + Graco + LineLazer II 5900 + Airless pump + Spray gun + Line guide + Bead dispenser + Honda GX160 engine, 5.5 HP + Year of manufacture: 2002 LineDriver: + Green + Zindel Variozet 3 + Honda engine with electric start + Hydrostatic drive + Hand throttle Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Dodpow T Skgefx Al Ujkn Errors and typos possible, subject to prior sale!

Condition: refurbished (used), Year of construction: 2015, SPITZENBERGER & SPIES Bordnetzsimulation Supply Simulation System PAS 15000/GN/KFZ/OPD The device is from VW. Update: Device overhauled by the manufacturer. As pictured. According to specifications, the following tests can be carried out: Audi BDM LAH XXX.915.181.XX ISO 7637-2 ISO 16750-2 ISO 21848 Dkjdpfewg Rzfjx Al Uen LV 124 SAE J 1113-11 VW TL 80101 VW TL 82066 VW TL 82366 Among others, the following components are installed: Power Supply NT 15000/GN/Kfz SyCore 2-Quadrant Amplifier PAS 15000/GN/Kfz Overvoltage Protection Device OPD 15000/GN/Kfz The instruction manual can gladly be sent by email in advance. Viewing welcome. Also see my other measurement and test equipment offers.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. Wired and ready for testing. Comes with extensive accessories. Technical specifications: Maximum gear diameter: 7,100 mm Gear width: 1,500 mm Maximum module: 45 Dodpfxjxwltho Al Uekn Table diameter: 4,000 mm Hob diameter x width: 400 x 500 mm Maximum helix angle: 45 degrees Planing cutter diameter: 500 mm Planing cutter speed: 9–63 rpm Total power consumption: 47 kW Machine weight: 160,000 kg

Condition: used, Geared electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Djdpfeud H Dajx Al Uekn Rev.: 9-54 rpm Angular drive, clutch, brake gear several pieces for sale from stock.

Condition: new, functionality: fully functional, New ZF (EK, EKR, EB-ER, EK-ER), Stromag (EKE, EDE, EKN, EFL, EMD, ELN), Heid (FOV, FZV, FMV, MMZ, FMOB) and other clutches available from the biggest European stock. The most popular brands which we have in continuous sale, are: ZF, Heid, Stromag, Ortlinghaus, Binder Magnete, Ema Dessau, Fumo, PSP Pohony, Telcomec, Warner, Monninghoff, Shinko, but also many other unique positions. We offer: clutches and brakes: electromagnetic multidiscs, toothed, mechanical and hydraulic; accessories: driver cups, plates (steel, sintered steel), levers, brush-holders, assembly sets, brushes. We operate efficiently because we know that in a crisis situation, the quick response is the most important thing. Are you looking for an electromagnetic clutch or brake? Our staff will help you to find it, and in case of items which are not longer in production, they will find a best replacement for you, or will offer a regeneration. Dkodpovq Nllefx Al Ujn

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Dedpfxex Tpzde Al Ujkn

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-A-0/S001 permanent magnet three-phase servo motor, serial no. as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Dksdji D Ihuopfx Al Uen

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV Permanent Magnet Motor SN:MAC093-32704 + Stegmann DG 1604 2500 PULS / REV encoder SN:330003657, used, normal signs of use, 100% functional, scope of delivery as per photos Dsdpfx Alei D In Ts Uskn

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent magnet motor SN:51095 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Dodpfx Aei D Iqksl Uskn

Condition: ready for operation (used), Rexroth MAC071B-0-TS-3-C / 095-A-2 / S001 Permanent Magnet Motor MNR: R911241380 , SN:MAC071-92272 , used, strong signs of use, 100% functional, scope of delivery as per photos Dkodpji D Nfqefx Al Ujn