Used Galvanizing Line for sale (11,770)

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Djdpfx Aoyvau Eoffscf

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Dedpfeyw Ndmjx Affocf Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: good (used), Year of construction: 2013, Grinding wheel 400 x 203 mm Regulating wheel 225 x 127 mm Fire extinguishing system Kraft u. Bauer Dcsdpfjyxl Drox Affjf Knoll microfilter Steuli lifting station

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 04/2023, fuel type: diesel, overall weight: 2,940 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,531 mm, total width: 2,474 mm, total height: 2,499 mm, loading space length: 2,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 88207 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated and foldable - with integrated turn signals * Radio: Ford audio system with 4-inch multifunction display - Connected Radio - DAB/DAB+ - FordPass Connect - 4 speakers, antenna - Integrated control panel and steering wheel audio remote control - Bluetooth, USB port, and hands-free system - Emergency call assistant * Seat Package 15: Driver’s seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Height-adjustable headrests - Fold-out table integrated into double passenger seat - Heated seats for driver and passenger - Inner armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology Package 10: Heated windscreen - Rain sensor wipers - Front and rear parking pilot system - Active emergency braking assistant (camera-based) - Lane keeping assist with fatigue warning and high-beam assistant, additionally with lane keeping system - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image display on multifunction display - LED downlight - Fog lights * Würth conversion: steel module block - vehicle floor panel - side wall lining ADDITIONAL EQUIPMENT * 1 battery * Driver’s airbag * Anti-lock braking system with electronic brake force distribution incl. ESP with traction control - Hill start assist - Crosswind assist - Emergency braking assistant - Rollover protection - Emergency brake support incl. emergency brake light * Battery: battery runtime, programmable for 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Rear double-wing doors with 180° opening angle (without window) * Front power windows with quick down/up function for driver's side * Ford Easy Fuel * High-capacity alternator * Lockable glove compartment * Interior lighting with delay function and front reading lights * Front air conditioning incl. dust and pollen filter * 70 l fuel tank Dodpjx I T Rxefx Affocf * Cargo area lighting * Steering wheel: synthetic leather steering wheel * Steering column adjustable for height and reach * MyKey key system * Emergency call assistant * Particulate filter: diesel particulate filter * Wheels: wheel trims * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 15 * Headlights: halogen dipped headlights with daytime running lights * Sliding door entry light, automatic when door is opened * Sliding door, right * Rear mud flaps * Side protection strips * Power steering * Seat belts - Pre-tensioners and force limiters for front seat belts * Start-stop system * Rear bumper with integrated step * Partition wall (plastic) at B-pillar height * Air recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted windows * Central locking with remote control * Second remote control key * Overhead storage compartment at the front ... and much more.----1st owner. German specification. Errors and prior sale excepted. 2 years factory warranty from initial registration (extendable on request). We are happy to accept your vehicle in trade-in. Financing/leasing available with zero down payment! Do you have any questions? We are happy to advise you! Despite existing checks, a deviation of the vehicle from the above

Condition: used, mileage: 63 km, power: 81 kW (110.13 HP), first registration: 06/2024, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal 66035 ---- Subject to errors and prior sale! SPECIAL EQUIPMENT Dedpjtr Srlsfx Affjcf - Airbag (passenger side) - Package: Technology package 5 exterior mirrors with indicators, adjustable, heated and folding audio system, 13 multifunction display, Ford SYNC 4 including navigation. Blind spot assist including CTA reversing emergency braking assist. Pre-Collision Assist, camera and radar based Fatigue warning, wrong-way driver warning, left lane keeping and lane change assist. Traffic sign recognition. Parking system Front/rear cruise control, ad. Intelligent speed limiter, reversing camera. Steering wheel, Sensico in leather look and ESP - Radio: Ford audio system with 13 multifunction display and Ford SYNC 4 including navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13 TFT multifunction display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant OTHER EQUIPMENT - 2-stage unlocking for passenger compartment - 6-speed gearbox - Electronic ABS with EBD - Driver's side airbag - Electrically adjustable outside mirrors and - Outside mirror housing made of plastic, black - Battery: H7 AGM single battery - On-board computer - Flat roof - Roof console - Double-wing rear door/180° (without window) - Tachometer - Third brake light - Electronic safety and stability - Electric front windows - Electronic parking brake - FordPass Connect - Heated windscreen - Floor mats: Rubber floor mats at the front - Grab handle, driver and passenger side - Lockable glove compartment with lid - Interior lighting at the front - Automatic air conditioning at the front - Headrests (3) - Fuel tank 55 l - Cargo area lighting (LED) - Steering wheel: Plastic steering wheel - Small center console - Emergency call assistant - Package: Technology package 2 (Trend) - Ford audio system with 13?? Multifunction display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Fatigue warning - Traffic sign recognition system - Wrong-way driver warning function - Lane assistant including lane keeping assistant - Parking pilot system front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera - Particle filter: diesel particle filter - Radio accessories: 4 speakers - Wheel covers - Tire repair kit - Tire pressure monitoring system - Wheels: steel 6.5 J x 16 m.215/65 R16 R - Windscreen wiper with rain sensor - Headlights with LED dipped beam - Sliding door: sliding door, right - Mud flaps at the rear - Mud flaps at the front - Power steering - Seat belts - Seats: Seat package 6A - Start-stop system - Ford Power start function - Bumpers mostly in vehicle color, partly - Partition wall (metal) without window - Plastic door handles, black-gray - Door hinges, 90 degrees - Recirculating air heating - Lashing eyes 6 - Immobilizer - Heat-insulating glazing, slightly tinted - Central locking with remote control ... and much more ---- 1st hand. German version. Subject to errors and prior sale. 2-year factory warranty from registration (can be extended on request). We are happy to accept your vehicle as part payment. Financing/leasing also possible without a deposit! Do you have any questions? We are happy to advise you! Since, despite existing checks, a deviation of the vehicle from the above description cannot be ruled out, we would like to point out that the vehicle description is only for general identification o

Condition: excellent (used), EWAG EWAMATIC LINE is a CNC tool and cutter grinder offering precision, high accuracy and reliability. 6 axes (X360×Y240×Z240 mm; B ±135°). 6 spindles, 7.5 kW spindle, 16 kVA, feeds 10 m/min, 3x400 V 50Hz, air 6 bar; weight ~4000 kg; 3400×2200×2500 mm. Equipment: Tool setter Renishaw, redressing device, oil mist extractor, loading robot Fanuc LR Mate 200iC, fire extinguishing system. Achieves tight tolerances; suited to automotive, aerospace, medical and watchmaking. Dodpfx Aoyxnzmsffecf

Year of construction: 2010, condition: good (used), Parts shown by hand not come. Dsdpfxeyr N Tvo Affecf Machine is fully functional.

Condition: good (used), Complette line for ravioli production. Dsdsub Diujpfx Affecf

Condition: good (used), Machine used for pasteurization vegetables. Dcjdsrwn Hbepfx Affjf

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Dcedpfx Afsx Tf Itjfef

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Dcsdpfjx Tf Hcex Affef Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, anti-condensation treatment, light-transmitting profiles

Condition: new, Year of construction: 2026, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Dedpfxsv Nma Ro Affjcf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1 Djdpfx Asw Idbyoffjcf

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Dedeqy Em Nepfx Affscf Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Dcsdpfjvvi Tysx Affjf Storage location: Customer

Condition: used, Reusable glass bottle filling line for mineral water and soft drinks, consisting of the following components: - Depalletising with pallet feeding (Schaefer, approx. 1989) - Unpacker (KHS with conversion by Paxona) - Crate washer for crate spraying - Unscrewing machine (Adelski) - Bottle cleaning machine (Krones, 2001) Single-end machine - Empty bottle inspector (Krones) with ejection and glass shredder - Glass bottle short tube filler (Krones, 2002) with cappers for crown caps and screw caps + cap inspection - Labelling machine (Krones, 2009) for cold glue labelling of paper labels + label inspection - Packer (KHS with conversion by Paxona) - Depalletising (Schaefer, approx. 1989) - Free transport for bottles and crates - CIP system with 3 containers - Premix system Translated with (free version) Additional title: Reusable line; years of manufacture approx. 1989-2012 Capacity: 11800 bo/h referring to 1.0 l bottles Formats: 0.33 l; 0.5 l; 0.8 l; 1.0 l; - Screw caps and crown caps Djdpfjyxnd Iex Affecf Operation / Control: Krones Features: pallet loading; depalletising; de-crater; crate washer; unscrewing machine; bottle cleaning machine; glass bottle filling and capping machine; cap inspection; labelling machine; label inspection; crater; palletising; free crate and bottle transport; CIP system; premix system

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Dcodpfxowuz Rte Affsf Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5

Condition: used, machine/vehicle number: 007857, Position 1: Horizontal Storage Systems IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 2: Beam panel saws with automatic warehouse IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 3: Single Edgebanders IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 4: Panel Feeding and Loading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 5: Panel Stacking and Offloading IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 6: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 7: CNC Machine Centres For Routing, Drilling And Edgebanding. IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Position 8: Cardboard Cutters IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Dcjdewuuf Dopfx Affjf Position 9: Strapping machine IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Condition: used, Year of construction: 2022, sheet thickness steel (max.): 1 mm, blade shaft diameter: 100 mm, number of blades: 5, working width: 1,250 mm, FORSTNER SLIT CUT Longitudinal Cutting and Sheet Shearing Line, Year 2022 The machine is in excellent condition and fully operational. It has undergone comprehensive maintenance, and the longitudinal slitting knives have been sharpened. The line is designed for longitudinal slitting and cutting sheets to size. The machine is connected and can be demonstrated. Longitudinal slitting into 6 strips (5 pairs of knives), with the possibility to install up to 7 pairs. Equipped with a modern S1 control system with touchscreen, allowing for easy programming of different lengths and quantities. The controller communicates with an electronic eye, automatically sets the zero point, and performs a perpendicular, clean cut. Djdpfx Ajx R Tt Soffecf Integrated material-saving function: the machine stops, raises the cutting knives, and the sheet is automatically fed to the shears. Complete technical documentation included. Specification: Model: FORSTNER SLIT CUT 1250 Made in: Austria Year: 2022 Working width: 1250 mm Max. thickness: up to 1.0 mm Longitudinal slitting knives: 5 pairs Shearing: rotary shears Controller: S1 If you have any further questions, we will be happy to answer them.

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price. Dcedpfx Afjyvhi Eofef

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Djdpfx Afeywztgsfjcf Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: good (used), Year of construction: 2019, Weinig Conturex C124-L CNC Window production machine (in left side infeed composition) Also available C124 R (Right-side infeed) year 2010 Description; Year of construction: 2019 Working width 40 - 260 mm Working height 25 - 150 mm Ratio of wood height to width max. 2:1 Powergrip clamping table Table support length 2x 2280 mm Workpiece length without follow-up cycle 175 - 2700 mm Workpiece length with follow-up cycle 2700 - 4500 mm Workpiece length with multiple follow-up cycle 4500 - 6000 mm Full description on request Dcodpfx Afjyvh Eyefsf Available approx. end of 2026 / January 2027 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, mileage: 4,500 km, power: 84 kW (114.21 HP), first registration: 01/2026, color: green, gearing type: automatic, suspension: other, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, traction control, Roadworthy, Touchscreen, Excellent condition, Accident-free, Demonstration vehicle, Metallic paint, 5-door, One owner, Full service history, Start-stop system, Green emissions sticker (Euro 4), Partial leather, Apple CarPlay, Android Auto, Distance warning system, Rearview camera, Black, Front side airbags, Passenger airbag, Height-adjustable driver’s seat, Height-adjustable front seats, Keyless-Go, Keyless Start, Front parking sensors, Rear parking sensors, Parking assist, Parking camera, Daytime running lights, LED daytime running lights, Digital radio, Rain sensor, Side cameras, Voice control, Traffic sign recognition, Ambient lighting, Blind spot assist, Hill start assist, Tire pressure monitoring system, Linguatronic, Four electric windows, Heated seats, Heated front seats, Hands-free system, Bluetooth hands-free, Multifunction steering wheel, USB port, Cabin air filter, Tinted windows, Electrically folding mirrors, Heated exterior mirrors, Heated steering wheel, Power steering, Non-smoking vehicle, Electric exterior mirrors, Rear head restraints, Speed limiter, ISOFIX child seat mounts, Roof rails, Adjustable steering column, Luggage compartment cover, Center armrest, Lane keep assist, Driver fatigue detection, High beam assist, Additional features available, Automatic transmission, Start-stop technology, Assist systems: blind spot assist, driver fatigue detection, traffic sign recognition, rain sensor, high beam assistant, hill start assist, lane keep assist, collision warning system. Comfort: automatic climate control, power steering, central locking, electric windows, seat heating, electric exterior mirrors, cruise control, multifunction steering wheel, Keyless-Go and start, cabin air filter, front and rear Park Distance Control, keyless entry, ambient lighting, speed limiter, remote central locking. Visibility: LED daytime running lights, LED tail lights, tinted windows, rearview camera, privacy glazing. Safety: ABS, airbags, immobilizer, ESP, tire pressure monitor, child seat anchors, breakdown kit. Entertainment: navigation system. Dsdpfx Afjyzgp Isfocf

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, conveyor belt width: 50 mm, total length: 20,000 mm, total width: 5,000 mm, total height: 2,400 mm, controller model: SIEMENS SIMATIK, No minimum price - guaranteed sale to the highest bidder! Placing a bid obliges the bidder to collect the item on time between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS The line consists of the following components: Pressing units Riveting units Screwing units Various axles & motors Pneumatic accessories Conveyor belt (belt width: 50 mm) Vibratory feeders Grippers MACHINE DETAILS Control system: SIEMENS SIMATIC Dimensions & Weight Dimensions (L x W x H): 20,000 x 5,000 x 2,400 mm Weight: 5,000 kg Dsdpfx Ajyk Uv Toffecf Note: The line can be transported on standard trucks. External reference: 23

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging Djdpfx Aeywxraeffscf • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing