Used Galvanizing Line for sale (17,976)

Condition: used, Safe Line Mettler Toledo through-flow metal detector Nwjdpfx Ajx Nymisgzor Diameter: 125mm Various diameters in stock See our other listings VMA Wekerom

Condition: used, MODEL: PA-18 LENGHT: 2800 mm DIAMETRE: 1800 mm Nwjdpfxex Ni Dqo Agzer HYDRAULIC SPINDLES. RELLING DEVICE. MAGASIN OF BOBBINS - 3 DECKS, WIDTH: 2.800 M.M. UNRELLING DEVICE. CLIPPER, LENGTH: 2.800 M.M.

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Nwedsx H Tilspfx Agzer Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 1984, Row and Fitting Boring Machine Used machine Year of manufacture: 1984 Condition: Function-tested Technical data: Fully automatic pneumatic control with foot pedal Boring unit 1.1 kW Speed 2800 rpm Boring stroke 0–55 mm Stop ruler cross adjustable from 0–140 mm Working height 850 mm Space requirement without extension rail 1000 x 750 mm Compressed air connection 6 bar Weight approx. 70 kg Nwjdpfsxdpkdsx Agzsr Includes various stops, boring heads, and drills Location: Flörsheim Availability: Immediate

Year of construction: 2021, condition: good (used), For sale is a Laska line ( Wolf freezer cutter microkutter menger microliter ) by Laska from 2021. List price 600000 There are still : -2x seydelmann 750 l cutter -1x seydelmann 120 l cutter Nedpfx Aekl Awgogzewr -various packing machines -2x dosenline 125g alu to 400g tinplate -various handtmann fillers - one slicer line And much more

Condition: excellent (used), Year of construction: 2009, Used tire treatment plant. Njdpfx Aortp E Iogzswr Equipment for obtaining rubber granulate, from the recovery of end-of-life tires, from the shredded tire. Composed by: Feeding belts to the granulator Granulator SG 80/120 Vibrating feeder and discharge belt (x3) Bar screen and recirculation of materials to the granulator through the conveyor belts. Magnetic overband separators (x5) Distribution screw to 5 lines of mills, with hoppers and belts, (x5) Knife mills with pneumatic unloading system (x5) Pneumatic conveying system at the outlet Fines conveying including hopper TO-21, vibrating feeder Double deck screen including feeding system and de-textilizer (x3) Pneumatic conveying system to the mills Intermediate dosing hoppers and mill feed belts. (x4) Fine grinding equipment Vertical screening at the outlet of the fine grinding mills. (x4) Pneumatic conveying system for fine grinding outlets Suction and filtering system for the removal of textile materials. Big-bag storage system

Year of construction: 2022, condition: excellent (used), Large Size Powder Coating Line SMA-REF-7186 Type: powder coating plants Manufacturer: Euroimpianti Model: Komby Multiline 5000 Year: 2022 Workpiece Size: max. 5 x 1,5 x 2 m Powder Coating: outer: 6,5 x 4,2 x 3,45 m inner: 5 x 1,5 x 2 m Extraction: 35.000 m³/h Oven: outer: 6 x 4,25 x 3,5 m inner: 5 x 1,5 x 2 m Capacity: 250 kW Medium: Gas Temp.: 200°C Features: Overhead track system Component weight rails: 1 ton Location: Southern Germany Availability: 02/2024 Terms of delivery: ex works Terms of payment: 100% before dismantling/loading Nwedpfolczdqox Agzor

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 CUTTING LINE - refurbished: 1) Polar 137EMC-MON AT Guillotine 1995 2) Transomat Downstacker/Palletiser 3) Jogger With Air Removal & possibly Bizerba sheet-count-scale 4) Paper Lift Njdsv Ic H Depfx Agzswr Contact us for further info and for personal price negotiations

Condition: ready for operation (used), Year of construction: 2006, material width 650 mm coil weight 15 t material thickness 16 mm Njdpfx Agex Ny A Rszewr The year of construction is estimated, the system is as good as new

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead removal or other planing tasks, with automatic workpiece return to the operator. spindles: 4 + 2 working width: 230 mm working height: 120 mm spindle 1: 7.5 kW / 50 mm / 8,000 rpm spindle 2: 11 kW / 50 mm / 8,000 rpm spindle 3: Common motor with spindle 2 / 50 mm / 8,000 rpm spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm feed: 5-24 m/min service: PC Control Nexus NC axes: Unimat 2 & 3, Uniplan 1 Nwjdpfex An R Tox Agzor

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. Njdpfx Asd Supgsgzewr PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Nodpfxex Hd Tho Agzswr Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit Nwodpfjx Dkk Ssx Agzor - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2013, URBAN CC AKS 6250-27/25 sealing and cleaning line + URBAN SV 430 cleaner. Year of production: AKS 6250-27/25 - 2013 Year of production: SV 430 - 2004 Nwodpfx Agoqzxpcozor

Condition: good (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 99 kg, Walter slott Machine Urban ws103 Nwedeq N Azgepfx Agzor

Condition: used, Slabs finishing line composed by loading, trimming, back calibration, front calibration, 2 Xolar polishing machines, selection, unloading. Nwedpfex An Iljx Agzer Including supply of new transverse and longitudinal trimming machine.

Condition: new, Allen Bradley 2706-B22J31 DL20 2-line Message Display , 31k Memory, unused in opened original box, 100% functional Nwsdpsi D Tzhofx Agzjr

Condition: good (used), Slitting line by manufacturer Schmitz. Maximum strip width up to 800 mm. Equipped with a trimming shear. A large number of tools are included. The line has already been dismantled and packed for transport. Technical documentation, electrical diagrams, etc. are available. Nwsdpfex Nph Ajx Agzsr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4410x3050x2727 mm Weight 13070 kg Total power requirement 172 kw Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1350*2620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/50hz/3phases- Air jet for each belt Optional- Automatic centering of conveyor belt YES- Press roller (rubber) YESWide Belt Sanding machine SUR-R-P1300 (Roller+Roller+Pad)- Max. Working width 1300mm- Min. Working Length 350mm- Working Thickness 10-100mm- First unit: Contact roller Ø255- Second unit: Contact roller Ø255- Third unit: pad- Total: Motor 95kw- First Unit: Motor 37kw- Second Unit: Motor 30kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 0.55kw- First unit: Contact roller shore 80sh- Second unit: Contact roller shore 70sh- Third unit: Contact roller PAD- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1320*2000mm- Air Pressure 0.6Mpa- Overall Dimensions 2175×2976×2727mm- Net Weight 7370 kgs- Working Table Fixed- Working table height from the ground 1038mm- Voltage 400v/50hz/3phases- Air jet for each belt YES- Automatic centering of conveyor belt YES- Press shoes(steel) YES Njdev A Hf Tepfx Agzewr

Condition: used, Breton Sample Line is the line for production of display samples in a wide range of materials and sizes The samples that can be produced on the Samples Line are suitable for marketing and exhibition uses. Nwodpexdi Rwefx Agzjr The line can process several materials: quartz, granite, marble, and porcelain stoneware.

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), very good condition, 100% functional Nodpfx Aji Eblaogzewr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Nwedsv A Hftspfx Agzsr Weight 12160 kg Total power requirement 135,6 kw

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Nedpfoxdi Agox Agzswr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x2500x1760 mm Weight 1500 kg Nwodevz E Dxjpfx Agzer Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3900x2500x1760 mm Weight 1800 kg Total power requirement 6 kw Nsdevz E Dfopfx Agzowr