Used Gasket for sale (118)

Condition: new, Factory-new electrically heated stainless steel mixing tank, insulated, with propeller agitator, including operating manual and CE declaration of conformity. Model: EBB150RWP Also available with alternative agitator types and in other sizes. Capacity: 152 L Approximate dimensions: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm (+ agitator motor) Material: 1.4301 (V2A) stainless steel Finish: IIIc / 2B Weld seams ground Maximum operating temperature: 110°C Operating pressure (tank): atmospheric -Upright design on castors -Top: Hinged lid, half bolted, half hinged, with removable stainless steel safety grid -Bottom: Flat bottom with lateral outlet DN50 DIN 11851 and disc valve, EPDM gasket -Agitator flange connection on top -2x push handles -1x type plate Agitator: Propeller agitator Power: 0.25 kW Speed: 980 rpm Laedpfx Aheym Ucloaoh Operating voltage: 3-phase 400 V

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 3 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 1,850 mm, total width: 100 mm, overall weight: 142 kg, inner dimension width: 863 mm, inner dimension length: 1,723 mm, inner dimension height: 733 mm, tank capacity: 595 l, energy consumption: 5 kWh, power: 0.4 kW (0.54 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed Ljdpfx Ahjrhwt Sjajah - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) - Can be used as a stand-alone unit - Can be used in a line up Btqqmuwb - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 2,500 mm, total width: 850 mm, overall weight: 155 kg, inner dimension width: 733 mm, inner dimension length: 2,343 mm, tank capacity: 753 l, energy consumption: 5 kWh, power: 50 kW (67.98 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Ljdpsrhwrbofx Ahajah - Can be used as a stand-alone unit - Can be used in a line up - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Laodpfx Ahsv Aad Aeaeh Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 230 kg, hopper volume: 200 l, FOOD-GRADE BAG EMPTYING HOPPER Upward-opening vertical door Transparent plexiglass inspection window Food-grade EPDM door gasket Round tubular handles Lajdjw Sddiepfx Ahaeh Removable grid – 5 mm thickness, 20x20 mm mesh size 3 suction pipes Ø60 mm with reduction to Ø50 mm, adjustable suction flow rate as specified Connection for level sensor G1"1/2 (positioned in the last third) Completely manufactured in AISI 304 stainless steel Total weight: 230 kg Internally polished finish

Condition: used, Year of construction: 1985, machine/vehicle number: R88, Used COBERT filling machine for wineTechnical Specifications & Performance DataThis Cobert SUPREMA is an isobaric filling machine engineered for precise counter-pressure filling of wine. With 24 filling valves, it achieves consistent product levels and preserves carbonation and quality in both still and sparkling products. The machine architecture supports industrial packaging environments where accuracy, hygiene, and repeatability are essential for beverage production.Manufacturer: CobertModel: SUPREMAYear: 1985Speed: 3000 BPH Machine type: Isobaric filling machineFilling technology: Isobaric (counter-pressure)No. of filling valves: 24Products: Still wine, semi-sparkling wine, sparkling wineContainers: Glass bottlesLine context: Suitable for integration in a used bottling line and second hand beverage production setupsAdvanced Automation & Control SystemsThe isobaric system pressurizes each bottle prior to liquid dosing, enabling controlled product transfer and stable filling even with carbonated wines. Valve sequencing provides reliable start/stop phases, while pressure equalization safeguards product integrity. The machine supports standard operator controls for setup and monitoring, aligning with established bottling equipment practices for safe and repeatable operation.Production Line Integration CapabilitiesDesigned for seamless integration into a complete bottling line, the SUPREMA pairs effectively with upstream rinsing machines and downstream cappers, capsule application, and labeling machines. It handles standard wine bottle geometries and neck finishes commonly found in beverage production. As part of an industrial packaging or beverage production line, it can operate in-line or as a standalone filler with dedicated infeed and outfeed conveyors.Machine Condition & Maintenance HistoryManufactured in 1985, this SUPREMA reflects robust Cobert engineering suitable for long-term service in second hand bottling applications. Preventive maintenance typically focuses on cleaning and sanitation of product-contact parts, routine inspection of seals and gaskets in the isobaric valves, verification of pressure settings, and calibration of fill levels to ensure consistent performance.Operational Performance & VersatilityThe isobaric filling principle enables gentle handling of sparkling and semi-sparkling wines by matching internal bottle pressure, minimizing foaming and preserving dissolved CO2. For still wines, the controlled filling cycle supports steady flow and stable levels. Its 24-valve configuration balances throughput with careful product handling, making it a versatile choice for wineries upgrading or expanding a used bottling line with proven filling technology.Installation Requirements & Site PreparationInstallation follows standard bottling equipment practices: stable, level flooring for accurate alignment; access for cleaning and service; and suitable utilities such as electrical power, compressed air for actuators, and process water for sanitation. Prop... Lsdpfxjzcf I Ro Ahaoah

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Ledex Nufmopfx Ahasah Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side

Condition: reconditioned (used), functionality: fully functional, total width: 620 mm, total length: 1,450 mm, Cleaning and welding line URBAN- AKS 1610+TBA+SV 530/WT 530 Operating direction: right to left. The entire line is 6200 mm wide and 14500 mm long. AKS 1610: weld bead limitation 0.2 mm - Horizontal 4-head welding machine for vinyl window profiles at a 90º angle. - Equipped with an integrated discharge system for conveying to cleaning machines. Laodpfxorunl Hj Ahajh - Electronic positioning. - SPS central control with keyboard and display. - PLL parallel welding system – as standard, increases corner strength by up to 20%. - Dimensions of welded elements: min. 410 x 370 mm (width X height Y) max. 3500 x 2300 mm (width X height Y) - Equipped with a gasket moulding system for 4 welding heads. TBA Conveyor table (between welder and cleaning machine) - Width 2600 mm, length 3500 mm, 8 guide rails. Driven, for automatic production lines. Electrically-driven conveyor table, transport belts with velour or super grip coating. Linking of several conveyor tables is possible. SV 530 CNC corner cleaning machine - Up to 17 tooling locations. - 2 axes. - PC with freely programmable CNC control, programmed on screen. - Simple programming of machining steps in group mode, single program selection, list, or automatic. - User-friendly diagnosis and service routine. Standard equipment: - Inner frame stop - 2x cutting/grooving knife unit NO/NU - 1x disc cutter with a saw blade 5mm (SF) - 2x inside grooving knife unit IO/IU Profile height: min. 30mm, max. 130mm/200mm Profile width: min. 20mm, max. 150mm Inner frame dimension: 210mm x 210mm Incl. turning device WT-530 Dimensions: width: 6200 mm, length: 14500 mm Completely refurbished, 6-month warranty on parts. Ready for operation. Available for inspection at the company's headquarters.

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Quantity available: 3 identical machines available New Price: New price €94,000 per unit Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Laedpfsx Ihufjx Ahajh Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type Laodpfx Ahsrcy Trjash - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION - Gasket pressing system

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Laedpey Ii Dzofx Ahajh Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Year of construction: 2011, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank with a 70 l/min pump installed in a lockable pump cabinet. Quantity: 1 Used; fully refurbished – the tank has been cleaned, reconditioned, primed, and painted. Color: Painted in RAL color… according to your color preference. Material: Steel, grade S235JRG2. Laodpfxjcnik Se Ahaoh Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate. Tank for above-ground installation. Shape: Cylindrical, mounted on 2 saddle supports. Tank dimensions: Length: approx. 5,350 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Dome 500 mm with dome cover, screws, and gasket. -Filling pipe 2” with TW closure (filling cap) -Suction pipe 1 ¼” -Dipstick and dipstick closure – tank level indicator -Vent stub with cap 1 ½” -Limit switch with type approval -Leak detector (optical) = LAS with leak detection fluid -Access ladder for side mounting, supplied separately Tank installation suitable for locations outside earthquake/flood zones. Diesel pump 70 l/min including particle filter, on/off switch, and tank key. All installed in a lockable pump cabinet. Simple pump with a total counter. Dispensing hose 4 m (extendable) Motor: 0.5 kW, 230 V, 4.2 A Installed with: Pipelines with ball valve, non-return valve, and tank mounting. Excellent offer! Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Our systems can be inspected at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. The price for the tank system is valid ex works Warstein, loaded. Delivery can be offered at an additional cost. Delivery time: short-term. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally drain, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: new, mileage: 500 km, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space volume: 18 m³, loading space length: 5,300 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN TGS 41.480 8x4 EURO6e GSR Retarder with Meiller Rear Tipper P436 Halfpipe 18m³ and Electric Tarpaulin First Registration: Unregistered Year of Manufacture: 2026 Mileage: 500 km Color: MAN Pure White RAL 9010 Technical Data * Power: 353 kW * Horsepower: 480 HP * Front tires: 315/80R22.5 (steer) * Rear tires: 315/80R22.5 (traction) * Gross vehicle weight: 41,000 kg * Odometer: 500 km * Emission standard: Euro 6E * Transmission: Automatic * Condition: New vehicle Chassis Equipment * Upright exhaust silencer on chassis, right behind cab * 400L fuel tank + 35L AdBlue * EBS + ABS * Disc brakes front axle - drum brakes rear axle * MAN TipMatic 12.28 OD, with retarder 35 * Front axle load: 9,200 kg * Rear axle load: 13,000 kg, hub-reduction axles * Roof hatch * Sun visor * Construction access steps with grab handles on driver's cab roof, driver's side * Headlamp protection with coarse mesh grille * LED daytime running lights * Preparation for rotating beacons * Premium driver's seat package, air-sprung, with seat heating * Multifunction steering wheel * Digital tachograph with remote comm. (CONTINENTAL) * Preparation for radio, with CB antenna on driver's cab roof * Automatic climate control (Climatronic) * Central storage box, rear section * GSR General Safety Regulation (mandatory package for EU registration) * ESP + ASR * Cruise control * Emergency brake assist EBA Plus and turn assist * Driver attention warning system (MAN AttentionGuard, non-switchable) * Traffic sign recognition * Reverse camera * MAN Advanced Media System Navigation 7" + sound system * Smartphone integration * Tow coupling on rear cross member, RINGFEDER type 6451 * 2-line trailer brake couplings, rear frame, center, standard coupling * Trailer socket, rear frame, 24V, 7-pin + ABS Body Equipment * Meiller Halfpipe Rear Tipper P436, steel, 18 m³ * Volume: 18 m³ * Electric Meiller sliding tarpaulin * Tarpaulin color: RAL 9006 white aluminum * Floor: 8mm Hardox 450 * Tipper body length: 5,300mm * Tipper body width: 2,300mm * Side wall height: 1,600mm * Front wall: 5mm Hardox 450 * Side walls: 5mm Hardox 450 * Rear wall: 5mm Hardox 450 * External slanted pendulum rear wall with clamp lock * Toggle fasteners * All-round rubber gasket on rear wall * Access ladder with folding lower section on front wall, left Lasdpfx Ahjxqu Egoaoh * Manually folding underrun protection * Aluminum fenders over both rear axles with foldable and removable mud flaps * Height-adjustable rear light brackets * Upper rear light covers in steel * Vehicle outline marking on cab and body (contour line as per regulations) This translation uses truck industry and agricultural machinery terminology to ensure full accuracy for listings on platforms such as Machineseeker and TruckScout24.

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL... as per your request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm). Monitoring space of the double wall with leak detection fluid. Container dimensions: Length: approx. 5,350 mm plus 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket. - Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“) - Suction pipe 1¼“ - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½“ - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately. Tank approved for installation outside of earthquake/flood zones. Diesel fuel dispenser with data recording Type: HDM80eco LTE Flow rate: 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel was dispensed. Fueling is done via tank key or PIN input. Dispensing area/fueling station Type: KAP system, galvanized Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Pan height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 collection basins, each with a volume of 150 liters. ===== Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. You can inspect our systems at any time. Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you. Laodpfx Aecl Sb Rshaeh Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional charge. Delivery time: upon agreement. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: used, Used stainless steel drum Item number: 10868 Last application: Pharmaceutical Volume: 150 litres Ledjw Iczrepfx Ahasah Type: Upright Material (product contact): 14301 / AISI 304 Design: Single-walled Operating pressure acc. to nameplate: ATM Tank dimensions: Internal diameter: 560 mm External diameter: 580 mm Cylindrical height: 630 mm Overall width: 480 mm Overall length: 750 mm Overall height: 590 mm Materials: Interior: 14301 / AISI 304 External components: 14301 / AISI 304 Features: Nameplate: no Gasket Clamping ring

Condition: new, Jensen Batch Washer 5 pieces: Valve flange seal, drain valve Jensen 700237382 8 pieces: Seal for steam injector, 370x140x4 2 pieces: Seal, steam injector 9005220191 Ledpfx Ahjy Uih Teaoah

Condition: new, Equipment: ABS, TECNOKAR SUPERTOP F1 6900 - AXLES: One single axle 9 ton, two twin axles 12 ton. R22.5 - AXLE CONFIGURATION: 1st axle liftable and self-steering, 2nd and 3rd axles fixed - VOLUME: 28 m³ - BODY STRUCTURE MATERIAL: Standard in DOMEX - FLOORPLATE MATERIAL: Wear-resistant steel, hardness HB 450 - FLOORPLATE THICKNESS: 6 mm - SIDE PANEL MATERIAL: Wear-resistant steel, hardness HB 450 - SIDE PANEL THICKNESS: 4 mm REAR: Made with high yield strength steel - REAR TAILGATE TYPE: Tipping with gasket and securing rods, fully hydraulic opening - REAR TAILGATE VERSION: Integrated into the body - HYDRAULIC OPENING VERSION: With protruding arms and protective wedges - REAR TAILGATE LOCKING: Hydraulic with hooks on side panels - DOUBLE JOINT ANTI-JAMMING SYSTEM: Yes - SEALING TYPE: Gasket on the body with 5 tightening wing nuts - REAR OVERHANG: With extension for paver, flush with the floor - SHAPED SADDLE: No - COVER TYPE: Cramaro - COVER HEIGHT: 400 mm Standard Equipment and Accessories: - MANUAL LOCKING OF STEERING AXLE - REVERSING ALARM - SPEED DISCS - ECOLED II LED REAR LIGHTS - PRESSURE GAUGE FOR MONITORING LOAD CAPACITY - PAIR OF REAR TOWING EYELETS - MANUAL FOLDING BUMPER WITH ROUND UNDERRUN BAR - QUICK UNLOADING SYSTEM - ANTI-VIBRATION RUBBER BUFFERS - TPMS TYRE PRESSURE MONITORING SYSTEM - SAF SWINGING RETRACTABLE LANDING GEARS - REMOTE CONTROL FOR ELECTRIC COVER AND VIBRATOR - UNDERSIDE VIBRATOR - 10 x 9.00 R 22.5 ALCOA DURA BRIGHT ULTRA ONE ALLOY WHEELS - 10 CONTINENTAL 315/80 R 22.5 TYRES PERSONALISED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL, NAPLES DOMENICO ESPOSITO S.P.A., EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OFFICE OPENING HOURS: MON-FRI: 8:30 am - 7:00 pm | SAT: 8:30 am - 2:00 pm WE OFFER A WIDE RANGE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S - Semi-trailer - Refrigerated Tipper Trailers – Lamberet - Schmitz – Isuzu – Rigid Flatbed – Crane – Tipper – 4 axles – Rear 4 Axles – Tway – 540 - 460 hp – Xway – Trilaterale – V8 – Scania – Frost Edition – Curtain side – Box – Loading gate – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck srl declines all responsibility for any discrepancies regarding technical specifications, equipment, or options which may, in some cases, differ from what is described. We invite you to verify the specifications of the particular vehicle. Lsdjvzh Ugspfx Ahaoah

Condition: excellent (used), Used stainless steel barrel Last use: Pharmaceuticals Item number: 10747 Volume: 50 liters Type: Vertical Material (wetted parts): 14301 / AISI 304 Design: Single-walled Operating pressure according to type plate: 0.5 bar Tank dimensions: Outer diameter: 350mm Overall width: 350mm Total length: 350mm Cylindrical height: 380mm Opening: 200mm Total height: 780mm Lasdpfx Ahsrdv R Asaoh Materials: Interior: 14301 / AISI 304 External parts: 14301 / AISI 304 Equipment: Nameplate: no Side handles Gasket 2 x sight glasses 3 x nozzles

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblasting Machine Ledew H N R Sjpfx Ahaeah The KDP350 cabinet sandblasting machine is an efficient device designed for cleaning and surface treatment of metal components. It is dedicated to professional workshops, industrial plants, and refurbishment service centers. The 330-liter working chamber and two side doors with perimeter sealing provide convenient access to the working area and ensure dust-free operation. The machine is supplied with a DC15 cyclone dust extraction system, which effectively removes dust generated during the blasting process. The KDP350 is an ideal solution as a wheel sandblaster and for cleaning metal components requiring precise abrasive treatment. Main Advantages of the KDP350 Sandblaster Large working chamber – 330 liters of capacity allows processing larger components. Two side doors – located on the left and right side, making loading and handling of workpieces easier. Dust-free operation – thanks to sealing gaskets and dust extraction ports with diameters of Ø63 mm and Ø90 mm. Sandblasting gun with ceramic nozzles – 4 interchangeable tips (4, 5, 6, and 7 mm) provide precise blasting performance. Working area lighting – improves visibility and accuracy during operation. Protective gloves integrated into the cabinet – wear-resistant gloves protect the operator’s hands. Compatibility with various abrasives – including quartz sand, glass beads, silicon abrasive, emery, and plastic granulate. Precision, Efficiency, and Versatile Applications The KDP350 cabinet sandblaster is suitable for removing rust, paint, scale, and technological deposits from metal, steel, and aluminium surfaces. It is an excellent solution for sandblasting: aluminium and steel wheels, engine blocks, hinges, machine housings, and other components requiring precise abrasive surface treatment. Adjustable operating parameters, including pressure from 4–8 bar and air consumption of 400–700 l/min, allow the machine to be adapted to different materials and abrasive types. Dust Extraction System – DC15 Cyclone Extractor The KDP350 is supplied with a high-performance DC15 cyclone dust extraction system, which efficiently separates dust and fine particles generated during surface treatment. The integrated filter and flexible connecting hose provide comfortable and safe operation, maintaining cleanliness inside the cabinet and in the surrounding workspace. Thanks to cyclone filtration technology, filter service life is extended and the need for frequent replacement is reduced. Standard Equipment DC15 cyclone dust extractor with filter and hose 12 V fluorescent lamp (230 V power supply with switch) 2 integrated rubber protective gloves Sandblasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: Ø63 mm and Ø90 mm 2 side doors with perimeter sealing gaskets User manual in Polish Technical Specifications – KDP350 Sandblasting Cabinet Parameter Specification Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Doors 2 pcs. (left and right side) Dust extraction connection Ø63 mm and Ø90 mm Internal dimensions 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg Note: The machine is supplied in parts and requires self-assembly according to the included instructions.

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 80.000 Liters Diameter: ca. 2.900 mm Length: ca. 12.780 mm Weight: ca. 15.750 kg Laodpfx Aohui D Tjhaoh At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 30.000 Liters Diameter: ca. 2.000 mm Length: ca. 9.940 mm Weight: ca. 5.500 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Lodohui Hkopfx Ahaeah Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 60.000 Liters Diameter: ca. 2.500 mm Length: ca. 12.680 mm Weight: ca. 10.700 kg Lajdpshui Efofx Ahaeh At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 50.000 Liters Diameter: ca. 2.500 mm Length: ca. 10.700 mm Weight: ca. 9.200 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector Ledpfx Ajhui Eijhajah • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 40.000 Liters Diameter: ca. 2.500 mm Length: ca. 8.720 mm Weight: ca. 7.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector Ledshui Hcspfx Ahajah • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). Lodpfx Ahehui Ipeajah The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 20.000 Liters Diameter: ca. 2.000 mm Length: ca. 6.840 mm Weight: ca. 4.000 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture