Used Gasket for sale (136)

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Hnsdpfx Abovgurcjrsh Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: used, Year of construction: 2013, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine. Hjdovguvzjpfx Abrjnh

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm Hnsdpfx Asrxtpdjbroh INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF Hsdpfx Abjxfvahsronh 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg Hnedpfxsr A Dm Is Abrjh The set includes a set of gaskets and consumables for the pump

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20025431, year of last overhaul: 2025, nominal power: 30 kW (40.79 HP), total height: 4,500 mm, REKORD B-SSt-ex Milling Plant – Explosion Protected, with ATEX Relief Valve -Suitable for: Sugar and substitutes (such as maltitol), Salt, Sodium glutamate, Malt, Cocoa, Milk powder -For installation and operation in ATEX dust zone 22 -Built entirely in stainless steel AISI 316L COMPLIANCE -EU Machinery Directive 2006/42/EC -EU ATEX Directive 2014/34/EC -EU Food Contact Directive EGV 1935/2004 Grinding Stock: -Product: Sugar and substitutes (such as maltitol), Salt, Sodium glutamate, Malt, Cocoa, Milk powder -Feed size: ≤ 1.5 mm -Final size: 95% ≤ 20–30 µm, adjustable by speed and feed rate -Throughput: 300–500 kg/h, depending on fineness PIN MILL Hodpfxexql Swo Abrenh -Design size: 315 mm -Housing: Pressure shock resistant, swing-out door with safety interlock -Grinding elements: Pin rotor and stator -Speed: 12,000 min⁻¹ / 200 m/s -Drive motor: max. 22.5 kW; IE3 -Bearings: Heavy-duty, auto-lubricated -Seal: Labyrinth gasket with sealing gas LOADING HOPPER WITH SECURITY SIEVE & ATEX ROTARY VALVE -Volume: 100 L -Stainless steel sieve (3.15 × 0.8 mm) removes lumps and impurities -Adjustable feed rate, factory set for target throughput -Pneumatic slide gate for fast outlet control -Flame-tight rotary valve, ATEX certified -Magnetic separator under valve -Pneumatic conveying to mill AGITATED BUFFER CONTAINER WITH FILTER -Free-fall discharge from mill to 200-L ATEX buffer (70–100 kg capacity) -Equipped with agitator and level control (auto stop at fill limit) -Pressure-shock resistant, protected by flame-free relief valve -Pulse-Jet filter with differential pressure monitoring -Compressed air system (tanks, tubes, valves) included -Suction blower for continuous air transport and product flow; purified air vented outside DISCHARGE SYSTEM -Screw conveyor with frequency-regulated drive -Flame-tight discharge rotary valve (ATEX) -Outlet for bag filling up to 55 kg or cart loading UTILITIES -Power: ≈ 30 kW, 3~400 V, 50 Hz, IP 55, TN-C -Compressed air (oil/water-free): 12–15 Nm³/h, ≥ 6.1 bar CONTROL UNIT -SIEMENS 15″ HMI and PLC S7-1200 -Ethernet data and error output to master control system -Remote maintenance capability -Drives: min. IP55, colour RAL 5017 -DANFOSS frequency inverters *Control cabinet installed outside explosion zone

Condition: new, Year of construction: 2023, machine/vehicle number: U-231811/2, 1x VDL HT350 rotary valve without drive (with drive available at extra cost). These are new and have never been used; manuals and flange gasket are included as new. The valves are supplied without drive. Size: DN350 Housing: Painted cast iron Hjdpfx Ajvpg Axebrsnh Rotor: Stainless steel with rubber blades Bearings: External slide bearings At 100% fill, 10 liters per revolution.

Condition: like new (used), Filter elements (spare parts) for kieselguhr filter SEITZ - ORION L 1. SS stainless steel plates and frames 40/40. Mounted together on wheels. 2. SS stainless steel plates 60/60. 9 pieces 3. Gaskets 14 pieces 4. Gaskets 16 pieces Hnjdpfx Aboq H Smajrjh 5. Gaskets 26 pieces

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 40.000 Liters Diameter: ca. 2.500 mm Length: ca. 8.720 mm Weight: ca. 7.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe Hjdpfx Abohui Hcsronh • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 20.000 Liters Diameter: ca. 2.000 mm Length: ca. 6.840 mm Weight: ca. 4.000 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector Hnedpfxshui Ips Abreh • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 50.000 Liters Diameter: ca. 2.500 mm Length: ca. 10.700 mm Weight: ca. 9.200 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture Hnedohui Eispfx Abreh

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 30.000 Liters Diameter: ca. 2.000 mm Length: ca. 9.940 mm Hedshui Hkjpfx Abrjnh Weight: ca. 5.500 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). Hjdpfxshui Efo Abrenh The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 60.000 Liters Diameter: ca. 2.500 mm Length: ca. 12.680 mm Weight: ca. 10.700 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 80.000 Liters Diameter: ca. 2.900 mm Hjdpehui D Tsfx Abronh Length: ca. 12.780 mm Weight: ca. 15.750 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: used, Used stainless steel drum Item number: 10868 Last application: Pharmaceutical Volume: 150 litres Type: Upright Material (product contact): 14301 / AISI 304 Design: Single-walled Operating pressure acc. to nameplate: ATM Tank dimensions: Internal diameter: 560 mm External diameter: 580 mm Cylindrical height: 630 mm Overall width: 480 mm Overall length: 750 mm Overall height: 590 mm Materials: Interior: 14301 / AISI 304 External components: 14301 / AISI 304 Hedpfx Aew Iczrjbrjnh Features: Nameplate: no Gasket Clamping ring

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric Hnodpfxew Dy D De Abroh - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, Factory-new agitated vessel with dissolver Hjdpfx Ajw Dy Hlobrsnh Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: new, Year of construction: 2017, functionality: fully functional, 3 × Eaton BECO INTEGRA® PLATE 400 EC – Hermetically Sealed Sheet Filter Systems (2017, Unused) Factory new, never used in production – only FAT/SAT with water. CE marked, GMP & FDA compliant. Complete FAT and SAT documentation available. Immediately available, can be sold individually or as a package. Model & Configuration: - Hermetically sealed depth filtration system (filter press) with external chamber and circumferential profile gasket - Stainless steel design (AISI 316L / 1.4404, partly 1.4435), high-gloss polished product-contact surfaces - CIP & SIP capable, sterile setup with BIOCONNECT flanged connections (NEUMO) - Format: 377 × 400 mm sheets (0.12 m² per sheet) - Hydraulic closure mechanism with 4-stage control for cleaning, sterilization, filtration & opening Key Technical Data: - Max. operating pressure: 6 bar | Max. differential pressure: 4 bar - Operating temperature: up to 140°C | Sterilization: up to 134°C - Mobile frame design - Includes discharge frames and clear spacers Differences between the 3 units: - Unit 1: 4.80 m² filtration area, 9.60 L solids volume, 40 sheets, product-contact parts partly 1.4435, fittings & riser pipes supplied separately - Unit 2: 3.36 m² filtration area (expandable to 4.80 m²), 6.72 L solids volume, 28 sheets, also stainless steel design, expandable - Unit 3: Technically identical to unit 1 but with additional fittings & riser pipes pre-installed (GEMÜ diaphragm valves, sight glasses, pressure gauges) Application Areas: - Pharmaceutical and biotech production - Food & beverage industry - Applications with high hygiene and sterility requirements Price: Negotiable depending on configuration, individual or total package possible. Total price in 2017: €253,000 Delivery: Hnjdew Nikvspfx Abroh Ex stock, worldwide shipping possible. Original documentation, FAT & SAT reports, drawings, and 3.1 certificates available.

Condition: good (used), Attention! Please do not use the pre-formulated inquiry field provided by Machineseeker; instead, enter your own questions in this field. Kindly fill out the inquiry field yourself. Only then will you receive a response. Used container unit, dry and leak-proof, requires cleaning. - Consists of 4 x 20-foot containers = approx. 60 m² Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.50 m Hnedpfjvx A U Aex Abreh Insulation: Roof: 100 mm Wall: 100 mm Floor: 100 mm Equipment: - Entrance door - 2x electric roller shutters - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Sealing gaskets - Wall cladding - Ceiling cladding - Threshold plates - Container clamps The unit is disassembled and ready for collection. Loading and transportation can be organized. Only serious and legitimate inquiries, including your name, email address, and telephone number, will be responded to.

Condition: used, XSK-400 Rubber Mixing Mill – Two-Roll Open Type | Wuxi Double Elephant Hodpfx Aexrdgvsbrsnh Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XSK-400 Country of Manufacture: China Technical Data: Roller Diameter: 400 mm Working Width: 600 mm Roller Speed ​​Ratio: 1 : 1.35 Front Roller Speed: 17.45 m/min Main Motor Power: 45 kW Motor Speed: 980 r/min Voltage: 380 V Frequency: 50 Hz Batch Capacity: Approx. 20-30 kg Machine Weight: Approx. 7,000–8,000 kg Description: The XSK-400 Mill for Rubber is a high-quality two-roll open mixing mill manufactured by Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. (China). Designed for rubber compound mixing, warming, and sheeting, this machine ensures stable performance, precise temperature control, and long-term durability. Perfect for industrial rubber production, hose and seal manufacturing, and laboratory compound processing. Main Features: Heavy-duty chilled cast iron rolls with excellent hardness and finish Water-cooled drilled rolls for temperature stability Low-noise hardened gear transmission for smooth performance Motorized nip adjustment for roll spacing precision Safety stop controls and reliable electrical components Durable construction, easy maintenance, and long service life Applications: Rubber and silicone compound mixing Plastic and rubber sheeting Hose, gasket, and belt manufacturing

Condition: used, functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be done before filling. The sealing of the can is achieved by deformation and subsequent overlapping by compression of the metal layers of the can body and the lid. The result is a kind of hook between the two that achieves its hermetic union and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted in the rim of the lid to achieve the most effective bonding of the metal layers. Production will depend on the format and product to be closed. - Can close. - Centralized lubrication with pump. - Traction plate. Hedpfewn E U Aox Abronh - Siemens touch screen. - Prepared for steam injection (optional).

Condition: used, functionality: fully functional, The can seamer is the machine used for hermetically sealing the lid to the can body prior to sterilization. Depending on the product, sterilization can also be done before filling. The sealing of the can is achieved by deformation and subsequent overlapping by compression of the metal layers of the can body and the lid. The result is a kind of hook between the two that achieves its hermetic union and, consequently, the tightness of the container. This sealing requires a rubber (sealing gasket) inserted in the rim of the lid to achieve the most effective bonding of the metal layers. * Production may vary depending on the format and product to be closed. * Incorporates steam injection. Features FMC 652 Seamer: -Almospheric/Steam injection. -Geared rotary can seamer. -Integrated head. -Normal lid / Easy open lid. -Can feeding by straight infeed. -Cans diameter min/max: 52.4 - 108 mm. Hnjdjwn Dmdopfx Abrsh -Cans height min/max: 28-190 mm.

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 2,889 mm, space requirement length: 11,292 mm, space requirement height: 2,675 mm, overall weight: 36,000 kg, temperature: 150 °C, operating pressure: 6 bar, pressure: 6 bar, power: 110 kW (149.56 HP), type of input current: AC, operating temperature: 150 °C, Equipment: documentation/manual, Equipment Type: Dry Product Capacity: Circa 500kg/hr Design Conditions: 150oC; 6barg/ Full Vacuum Materials of Construction (Product Wetted): 304L SS, Viton O-Ring, PTFE Reinforced Flat Gaskets Electric Motor: 3 Pole / 480V / 60Hz, 110kW, 1780 rpm, Eex de IIB T4, IP 65; Horizontal, Single-Shaft, Continuous, Vacuum Kneader- Dryer Single step direct (contact) evaporation/drying process 3 heating zones on shell, 2 heating zones on agitator Twin screw feeder General Applications: Drying of products exhibiting multiple phase change e.g. Liquid –> highly viscous –> pasty–> free flowing powder or granular solid Ability to handle foaming, stickiness, crusting & required variation of temperature and drive input requirements Self-cleaning design and heavy duty/high torque to promote heat and mass transfer Potential Applications: Drying of a crystalline mass, e.g. Anti-Oxidants: Typical solvents: Methanol, Cyclohexane, Isopropanol Industrial Residues: Recovery of hazardous / valuable materials from wastes. E.g. TDI (Polyurethane monomer) from distillation residue Drying of paint and lacquer sludge Hnjdpjt Uqldjfx Abroh Recovery of water/toluene from rubber residues Recovery of solvents from vitamin distillation residues Polymerisation Reactions..

Condition: excellent (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: CM17B9 - General Industry - Application: Bonding, Sealing, Gasketing, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 6.1 L/min Hjdpfx Aov Tmcaobrjnh - Maximum working pressure: 441 bar - Maximum air inlet pressure: 10.34 bar - Pressure ratio: 63:1 - For 200 L drums - Maximum operating temperature: 49°C - Includes new hoses and gun - Graco ULTRA LITE 6000 gun - Nozzle to suit

Condition: like new (used), - Brand: Graco - Reference: CM1145 - General Industry - Application: Bonding, Sealing, PVC, Gaskets, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 3.4 L/min - Maximum working pressure: 276 bar - Maximum air inlet pressure: 8.62 bar - Pressure ratio: 40:1 - For 20 L drums - Maximum operating temperature: 49°C - Fully inspected pre-owned product - 1-year warranty (Except for electric machines and non-Graco products) - Shipping or in-store pickup available - 21% VAT not included Hnedpfxov S Dzds Abreh - VAT included. A VAT refund may be requested for VIES-registered companies or those with a TAX ID. - Customs and tariff fees are the buyer's responsibility in the case of imports