Used Gear Box for sale (22,357)

Condition: used, Year of construction: 2011, machine/vehicle number: 25621, workpiece diameter (max.): 360 mm, Equipped with: Gear Spindle Runout: -Radial (Bore): .00005 -Axial (Face): .00005 Pinion Spindle Runout: -Radial (Bore): .00005 Axial (Face): .00005 Axis Repeatability: -X: .0001 -Y: .0001 -Z: .0001 Axis Lost Motion: -X: .00005 -Y: .00005 -Z: .00005 Fanuc 160I MB Control Base Work Holding Draw Bars Automatic Doors Spindle Chiller Transformer Hydraulic System Phsdsxdfanspfx Agzja Festo Pneumatics Automation Interface Available SPECIFICATIONS: Maximum Gear Outside Diameter: 360 mm (14.2") Maximum Pinion Outside Diameter: 340 mm (13.4") Maximum Pinion Drive Speed: 3000 rpm Maximum Gear Drive Speed: 1500 rpm Offset Vertical 150 mm ( 5.9") Pinion Cone Range: (90) (135-350) (70) (146-438)* (110) (51-343)* Gear Cone Range: (90) (65-280) (70) (78-306)* (110) (56-284)* Standard Testing Torque Load 2 to 90 Nm (1.5 to 66 ft-lb). Parallel Axis - face-to-face 147 - 362 - Center Distance -7 - 250 Pinion Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 419 mm (16.5") Gear Spindle Bore 39T - Diameter 99.2 mm (3.9") - Depth 250 mm (9.8") Floor Space (width & length) 2100 x 2550 mm (82.7 x 100.4") Height (to top of stack light) 2750 mm (108.3") Weight (base machine) 9100 Kg (20062 lbs)

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives Podpfew N S E Ajx Agzeha - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, machine/vehicle number: WDB9630031004xxxx, mileage: 379,561 km, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21020 Specifications: 2016 model Km: 379,561 320 hp Air suspension rear Workshop cabinet Tires (see photos) Zepro hydraulic tail lift Side opening + rear opening Rear outlet Ready for delivery Phodpfsw S Sxhsx Agzja Description:Mercedes Actros box truck with side opening for sale.Ready for delivery. Km: 379561 HK: 319 Technical approved: Yes EU-approved until: 23.03.2026 Own weight: 10400 Total Weight: 19500 Width: 255 Length: 1026 Euro: 6 Model: Actros

Condition: new, Year of construction: 2010, Make Voith Model: RWW11 E5 Windrive planetary gear Year of manufacturing: 2010, Unused Psdpfx Ajtub Dzogzsha Dimensions LxWxH (mm) 2400 x 1450 x 1700 Weight (kg) ca 6900 Total quantity in stock 3 Country of origin Germany Comments Unused mindmill planetary gear, 3400 Kw power supply needed, n1: 476 rpm / n2: 1500 rpm

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor Psdpfx Agew Admyezoha -Manufacturer gearbox: Bonfiglioli type MVF 49/P -Speed: 20.4 rpm i= 45 -Motor manufacturer ABB MU71B14-6 MK129106-S -Power: 0.25 kW -Design: B5 angle -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 55 -Number: 4x gear motor available -Price: per piece -Dimensions: 350/170/H180 mm -Weight: 8.5 kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Phedpfx Aortrzdjgzea Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2003, max. ram stroke 100 mm max. module 8 table diameter 400 mm workpiece diameter 600 mm strokes per minute 80-1200 Hübe/min Feed radial axis from - to 1 - 3750 mm/min angle adjustable from - to - 0,5 / + 0,5 Grad Accessories: Phjdsvfwuqopfx Agzsa - Various tool holders - Various clamping devices - Documentation

Condition: used, machine/vehicle number: YV2J1E1A4CA72xxxx, mileage: 466,571 km, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21018 Pedpjw S Syfjfx Agzjha Specifications: 2012 model km: 466,571 Toolbox Bussbygg box body Bull bar Full side opening Zepro tail lift Lift capacity: 2,000 kg VBG coupling Air suspension rear Parabolic spring front Ready for delivery Description:Volvo FM 370 box truck with full side opening for sale.Ready for delivery. Km: 466571 HK: 378 Technical approved: Yes EU-approved until: 17.02.2026 Own weight: 10550 Total Weight: 20000 Width: 260 Length: 979 Kw: 278 Euro: 5 Model: FM 370

Condition: good (used), Gear motor, electric motor, three-phase motor -Gearbox manufacturer Bonfiglioli type: MVQ10 Podpjc Nc Sgjfx Agzoha -Speeds: 112 rpm -Power: 0.55 kW -Construction: B3 angle -Diameter hollow shaft: Ø 22 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 355/134/H210 mm -Weight: 10 kg/piece

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Pedpfx Agsrtrykjzeha Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm Phedpfx Asul Efmogzja diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, machine/vehicle number: WDB9670271038xxxx, mileage: 185,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21556 Specifications: Phjdpfx Agoxpdgkozoa Mileage: 185,000 km Transmission: Automatic Euro 6, 299 hp Engine brake Norka body 17-pallet box Full side opening 2-ton Zepro tail lift Remote control 4x2 Reversing camera Side camera Webasto heater Tires (see photos) Air horn Bed Radio/CD Climate control / AC Service agreement Ready for delivery Total height Description:Mercedes Atego box truck with only 185,000 km.The truck has a 17-pallet box with full side opening.Has had a full service agreement throughout.Ready for delivery. Km: 185000 HK: 299 Technical approved: Yes EU-approved until: 18.03.2026 Own weight: 8110 Total Weight: 16000 Payload: 7815 Width: 255 Length: 958 Euro: 6 Model: Atego 1530 Skapbil m/ Full Sideåpning Gearbox: Automatic Number of pallets: 17

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") Phjdjxaqa Sopfx Agzoa B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min Pedpfsvr Hf Eex Agzoha bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: used, machine/vehicle number: WSBSTA120KW90xxxx, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 22072 Specifications: Model year: 2019 Tyres (see photos) Twin-axle Length: 464 cm Width: 248 cm Unladen weight: 760 kg Maximum payload: 2240 kg Interior height: approx. 266 cm Interior length: approx. 302 cm Interior width: approx. 197 cm Delivery by agreement Phjdex Nuydepfx Agzea Own weight: 760 Total Weight: 3000 Payload: 2240 Width: 248 Length: 464 Model: 2019 Stedele 2-akslet skaphenger

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Pedpfx Agoruakgjzsha Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Phjdpfxex Ncb Aj Agzoa Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Full side opening Delivery by appointment   Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic

Condition: used, machine/vehicle number: YV2AP90DXBA71xxxx, mileage: 630,000 km, Year of construction: 2011, Please contact ATS Norway for more information Please provide reference number upon request: 22082 Specifications: Model year: 2011 Mileage: approximately 630,000 km EU approved until 20.05.2026 Euro 5 Wheelbase: 490/136 cm 700 hp Retarder Air suspension Tandem Diesel heater Onspot Tires (see pictures) Galvanized aluminum body Clutch replaced Gearbox serviced and circuit board replaced Compressor horn Roof lights Tool box Automatic transmission AC/Climate control 2x beds Radio Delivery by agreement Description: 2011 Volvo FH16 with 700 horsepower. It has onspot functionality. Delivery by agreement. Km: 630000 HK: 700 Technical approved: Yes Podpjx Izqtsfx Agzjha EU-approved until: 20.05.2026 Own weight: 11400 Total Weight: 29500 Payload: 18025 Width: 255 Length: 937 Kw: 515 Euro: 5 Model: FH16 700 Gearbox: Automatic

Condition: used, machine/vehicle number: ZCFA775F50267xxxx, mileage: 93,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 22105 Specifications: Not EU approved Mileage: 93,000 km Transmission: Automatic Tires in good condition Engine brake Podpfsx Nuywex Agzoha Euro 6, 207 hp Zepro tail lift, 1,500 kg Side door Norka body 3 seats Radio/CD Climate control / AC Ready for delivery Description: 2017 Iveco Eurocargo box truck with only 93,000 km.The vehicle is not EU approved, but the defect report is included.Ready for delivery. Km: 93000 HK: 207 Technical approved: no EU-approved until: 08.09.2025 Own weight: 4950 Total Weight: 7500 Payload: 2475 Width: 255 Length: 800 Euro: 6 Model: 2017 Iveco Eurocargo 75-210 Skapbil. 93 000 km! Gearbox: Automatic

Condition: used, machine/vehicle number: UH9SL241325HFxxxx, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22102 Specifications: Not EU approved 3-axle trailer 33-pallet box body Refrigeration/freezer unit Zepro tail lift Maximum payload: 31,440 kg Ready for delivery Phsdpfx Agjx Nuy Rszsa Technical approved: no EU-approved until: 12.11.2024 Own weight: 10560 Total Weight: 42000 Payload: 31440 Width: 260 Length: 1402 Model: 2013 HFR Skapsemi m/ Kjøl/frys aggregat

Condition: used, machine/vehicle number: W1T9630091068xxxx, mileage: 70,000 km, Year of construction: 2024, Please contact ATS Norway for more information Please provide reference number upon request: 21546 Specifications: Km: Approx. 70,000 (may increase) Transmission: Automatic Engine brake Euro 6, 326 hp Full air suspension 4x2 Good tires Ekeri box 18 pallets External height: Approx. 3.95 m Full side opening 2-ton Zepro tail lift Remote control Rear view camera Internal length: Approx. 7.6 m Radio/CD Climate control/AC Last service done summer 2025 Service history Delivery by agreement Description:Well-maintained Mercedes Actros 1833 box truck from 2024.The truck has only driven 70,000 km.18-pallet Ekeri box with full side opening.Delivery by agreement. Km: 70000 HK: 326 Phedpfx Asxpdhhegzoa Technical approved: Yes EU-approved until: 12.03.2026 Own weight: 11140 Payload: 9285 Model: Actros 1833

Condition: used, machine/vehicle number: YS2G6X2000208xxxx, mileage: 375,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 22077 Specifications: 2013 model EU approved until 15.02.2026 Mileage: 375,000 km Euro 5 Wheelbase: 490/135 cm 6x2 480 hp Full air suspension Retarder Internal length: 7.758 m Internal width: 2.454 m Internal height: 2.480 m Full side opening Tail lift Remote control Automatic transmission 2 bunks Climate control / AC Radio See video Description: 2013 Scania G480 6x2 box truck with full side opening.Four air tanks have been replaced on the vehicle.Delivery by agreement. Km: 375000 HK: 480 Technical approved: Yes EU-approved until: 15.02.2026 Own weight: 13120 Total Weight: 27000 Payload: 13805 Width: 255 Length: 1020 Inside width: 245 Inside lenght: 775 Podpfxox Ip A De Agzeha Inside hight: 248 Euro: 5 Model: 2013 Scania G480 6x2 skapbil med full sideåpning. Gearbox: Automatic

Condition: used, machine/vehicle number: WDB9670221016xxxx, mileage: 151,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 22098 Specifications: EU approved until 06.08.2026 Mileage: 151,000 km Transmission: Automatic Good tires Engine brake 12-pallet box body Refrigeration/freezer unit Tail lift Phsdsx Nl Iljpfx Agzea Euro 6, 231 hp 4x2 3 seats Radio/CD Climate control / AC Service history at Bertel O. Steen Description: 2017 Mercedes Atego 823 box truck.Equipped with refrigeration/freezer unit and tail lift.The box body accommodates 12 pallets.Ready for delivery. Km: 151000 HK: 231 Technical approved: Yes EU-approved until: 19.03.2026 Own weight: 6400 Total Weight: 7490 Payload: 1015 Width: 260 Length: 702 Euro: 6 Model: 2017 Mercedes Atego 823 Skapbil m/ Kjøl/frys aggregat. Gearbox: Automatic Number of pallets: 12

Condition: used, machine/vehicle number: ZCFA875F40270xxxx, mileage: 71,000 km, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21347 Specifications: 2020 model Km: approx. 71,000 Automatic Tires (see pictures) 3 seats Interior height: approx. 236 cm Norka box body Side door 1500 kg Zepro lift Rear-view camera Euro 6 Length: 794 cm Width: 255 cm Wheelbase: 418 cm Curb weight: 5040 kg 4x2 207 hp Radio/CD Climate control/AC Description:2020 Iveco 75-210 box truck with only 71,000 km.Comes with a new bumper and step.Norka box body with 1500 kg Zepro lift and side door.Can be delivered on short notice. Km: 71000 HK: 207 Technical approved: no Phedpfxexd Rbdo Agzea EU-approved until: 21.10.2025 Own weight: 5040 Total Weight: 7500 Payload: 2385 Width: 255 Length: 794 Euro: 6 Model: Eurocargo 75-210 4x2 Skapbil Gearbox: Automatic

Condition: used, machine/vehicle number: WDB9630201034xxxx, mileage: 269,220 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21642 Specifications: 2019 model 269,220 km (I want to know a little) Euro 6 engine 6x2 530 hp Automatic transmission Spring: full air Tires (see pictures) Refrigeration/freezing unit Zepro lift w/ remote control Longitudinal partition wall Objection length: 8,531 m Internal width: 2.493 m Internal height: 2,740 m P building: bus building Lift and swing on 3 axles Refrigerator Diesel heater Hang on. leather seats Air conditioning/ac Light Radio Ready for delivery Description: We have a 2019 Mercedes-Benz Actrox 6x2 box truck w/ refrigerator/freezer unit for sale. The car is in weekly operation and the mileage will therefore increase slightly. All services and maintenance are carried out at the workshop. There is also a service agreement on the generator. The starter motor and brakes on axle 2 have been replaced. Phedpoxq A T Ejfx Agzsa Everything works as it should, according to the owner. Ready for delivery Km: 269220 HK: 530 Technical approved: Yes EU-approved until: 09.03.2026 Own weight: 14700 Euro: 6 Model: Actrox 6x2 skapbil m/ kjøl/frys aggregat Gearbox: Automatic