Used Gears Box for sale (16,589)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Hedpfx Aboxaqa Ssrjnh Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: Hnjdpfx Abortrzdsreh RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Hedpsxdfazofx Abrsnh Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Hnedsxdfa Ujpfx Abrsh Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings Hedpfxsw Iquyo Abrjnh -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Hodpfortrykox Abrjnh Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm Hnodperuakgsfx Abrjh 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7 t dimensions of the machine ca. 4x3x2,5 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg Hodpfx Abev Ehbbjronh with robot cell

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence Hnsdpew N S E Aefx Abreh - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and Hnjdpfxsul Efme Abrjh easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 800/300/H350 mm -Weight: 68 kg Hnsdpfx Abjciw Smerjh

Condition: used, mileage: 199,000 km, power: 120 kW (163.15 HP), first registration: 01/2013, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 7,000 mm, loading space length: 4,300 mm, loading space width: 2,050 mm, loading space height: 2,150 mm, Year of construction: 2012, Equipment: ABS, central locking, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Sale preferably to commercial customers. Internal ID number: [3176] Hjdpfxeykx Umo Abrjnh ----Optional bookings: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing possible, even without down payment * Spring offer: Increase the towing capacity up to 3,500 kg (vehicle- and manufacturer-dependent) on request and for a surcharge of only €999. ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German vehicle * Ready for immediate use * Euro 5 standard * Maxi aluminum box body (4,300 x 2,050 x 2,150 mm) Special equipment: Audio system RCD 2001, electrically adjustable and heated exterior mirrors, outside temperature display, onboard tools and jack, electric interface for external use (CAN data bus), reinforced rear suspension, 100 L fuel tank, side marker lights, spare wheel identical to running wheels, co-driver double seat in cab, heated driver’s seat, reinforced rear stabilizer, additional winter tires (customer details required) Further equipment: Driver airbag, traction control system (ASR), driver assistance system: brake assist (HBA), digital tachograph, body/structure: standard flatbed, facelift model, engine 2.0 l – 120 kW TDI, wheelbase 4,325 mm, low emissions according to Euro 5, seat cover/upholstery: fabric, adjustable driver’s seat, reinforced front stabilizer, rear underrun protection, permitted gross vehicle weight 5.00 t ----Interested in leasing or financing? We offer attractive deals—down payment is not required! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Please note: All information provided online is non-binding and serves only as a general vehicle description. Errors, typographical mistakes and prior sale reserved. The final condition of the vehicle is determined exclusively by the purchase contract on site or by written agreement. Vehicles with more than 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: good (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 1137.05, Used tool grinding machine Manufacturer: KAPP Hedpfewzk R Nox Abronh Model: AST305B Year of manufacture: 1979 Serial number: 1137.05 With accessories

Condition: good (used), Stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, small load carriers, storage bins, shelf boxes, shelf boxes Hnsdpfx Absuzn Dxjrsh -Manufacturer: Schoeller, Arca Systems shelving units -Type: 9133 -Number: 1190 boxes available -Price: per piece, minimum order 5 pieces -Dimensions: 595/230/H100 mm -Weight: 0.7 kg/pc.

Condition: used, Year of construction: 2002, Technical details: Hsdpfowdyx Ujx Abrjnh max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed *

Condition: good (used), mileage: 58,666 km, power: 125 kW (169.95 HP), first registration: 11/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 7,150 mm, total width: 2,050 mm, total height: 2,820 mm, loading space length: 4,140 mm, loading space width: 1,550 mm, loading space height: 1,790 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, = Further options and accessories = - None - Partition wall = Notes = Configuration: 4x2, Payload: 1,083 kg, Unladen weight: 2,417 kg, Gross vehicle weight: 3,500 kg, Trailer load, unbraked: 750 kg, Trailer load centre axle, braked: 2,000 kg, Cabin type: single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: front and rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, GPS navigation, Colour: white, Rear-view camera, Lighting: halogen lamp, Air conditioning, Heated seats, Bluetooth, Engine power: 125 kW (168 HP), Fuel: diesel, Euro 6 emission standard, Drive technology: timing chain, Transmission type: manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Rear access step, Roof rack: none, Side doors: 1, Rear closure: double door, Central locking, Seats: 3, Seat configuration: 1+2, Seat upholstery: fabric, Seat adjustment: manual, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: V200 max, Refrigeration unit: compressor / electric, Heating, Cooling type: freezing, Day/night cooling: day/night cooling, L3H2, Maxi, Freezer, Cooler, D/N connection, 360° camera, MBUX, Air conditioning, Navigation, Euro 6, 170 HP!, Tire type: all-season tires = Further Information = Hjdpjwgh S Iefx Abrjnh General information Number of doors: 1 Registration number: V-16-LRT Axle configuration Tire size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Axle 1: Tire tread left: 9 mm; Tire tread right: 9 mm Axle 2: Tire tread left: 9 mm; Tire tread right: 9 mm Weights Unladen weight: 2,417 kg Payload: 1,083 kg Gross vehicle weight: 3,500 kg Functionality Loading height: 68 cm Cooling unit: engine-driven Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Lease price: €830 per month (van, 72 months); Please inquire for more information and terms

Condition: excellent (used), Year of construction: 2009, max. wheel diameter 315 mm gear width 280 mm max. module 8 min. module 1 Control Siemens 840 D distance cutter centre - clamping area 20 - 245 mm distance spindle /table 190 - 470 mm diameter of hob 160 mm Hsdjx N Ndkopfx Abrjnh tangential adjustment 110 mm ical angle 45 ° min. number of teeth 4 / 8 cutter length max. 200 mm table surface area 295 mm milling spindle speeds (infinitely variable) 50 - 400 U/min total power requirement 58 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4,1 x 3,5 x 2,6 m The machine was completely overhauled by SerWeMa in 2009 equipped with a Siemens Sinumerik 840D control. Possible uses: Straight and helical gears, crowned or tapered spur gears, Worm wheels for single or multi-start worms, Worms, sprockets, ratchet wheels, splines

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens Hjdpfx Abex N Nddsrjnh max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: good (used), max. wheel diameter 130 mm gear width 140 mm Hjdpfxsvpab Is Abrenh max. module 2,5 min. module 0,3 turning speeds 112 - 1000 U/min min. number of teeth 6 clamping length max. 150 mm total power requirement 3,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,3 x 1,2 x 1,5 m

Condition: excellent (used), Year of construction: 2023, Ref: 11068 . 2023 Kolbus BLW 200 + BLT 200 ‘Boxline’ Wrapper & Taper Line The Boxline Wrapper is a fully automatic laminating machine for producing packaging, lids, and boxes by forming plates The Boxline Taper is a sealing tape machine for automated fold-up and taping of punched or grooved box blanks up to 40 products/min Features - BLW 200: Non-stop, four-sided laminating panel blanks without forming tools at up to 40 cycles per minute, even with deep and short wraps Box size and model changeover without changing the forming tools Clear and simple computerised operation including integrated robot Non-stop wrapping of all four box sides; processing for each side can be optimized separately Hnedpjyg E Irjfx Abreh Continuous transport, alternate sides wrapped sequentially, tolerance compensation Precise automated edge turning for deep and shallow turn-ins Fast, cost-effective format changes simply by swapping the forming plates Higher quality – lower resource consumption Features - BLT 200: Coupled inline with BLW 200 Wrapper Fold-up station 4 hot sealing tape applicators Delivery via conveyor belt Automated format set-up Specifications: BLW 200 Min. Max. Box length: 56mm 570mm Box width: 56mm 360mm Box height: 15mm 170mm Board thickness: 1mm 3mm Cloth length: 120mm 815 mm Cloth width: 120mm 605mm Wrap dimension: 15mm 85mm Side wrap dimension: 15mm 85mm Mechanical speed: 40 cycles/min Box height > 135mm: 25 cycles/min max BLT 200 Min. Max. Cardboard blanks: 86x86mm 735x525mm (width x height) Size range box: 56x56x15mm 360x570x170mm (width x length x height) Thickness cardboard: 1mm 3mm Mechanical speed: 40 cycles/min Box height > 135mm: 25 cycles/min max

Condition: good (used), Servo motor, electric motor, DC motor, servo geared motor Hnsdpfx Absp Hiywsreh -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 44X25SI -Voltage: 24 V -Speed: 2860 rpm -Gearbox: PLG 52 i = 8:1 -Shaft: Ø 12 x 22 mm -Number: 7x geared motors available -Price: per piece -Dimensions: 172/58/H52 mm -Weight: 1.1 kg/pc.

Condition: good (used), Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer: MOTOVARIO TKFL/10 gearbox -Manufacturer: ASEA MT80B19F100-4 engine -Motor power: 0.75 kW -Speed range: 190-1000 rpm -Motor: adjustable -Drive shaft: Ø 24 mm -Design: B5 Hedochfb Ropfx Abrsnh -Quantity: 1 motor available -Price: per piece -Dimensions: 445/255/240 mm -Weight: 29 kg

Year of construction: 2020, condition: good (used), Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive Hodpfx Aboyilg Rsrsnh -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Hnjdpfeykl Exex Abreh

Condition: used, mileage: 180,000 km, power: 105 kW (142.76 HP), first registration: 06/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2026, color: red, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 3,200 mm, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Extended exterior mirror base left/right, Chassis: Stabilization Level II, Smoker package, Spare wheel with road tires, Spare wheel carrier under rear frame incl. jack, Driver’s cab seats: comfort driver's seat, Fleece battery 92 Ah, Jack Further equipment: Storage compartment above windscreen, Storage compartment below dashboard passenger side, Rear towing eye, Adaptive brake light, Driver’s side airbag, Traction control system (ASR), Washer fluid level indicator, Exterior mirrors electrically adjustable and heated, both sides, Outside temperature display, Brake assist, Roof lining in driver’s cab, Automatic headlight activation, Electronic brake-force distribution (EBD), Driver assistance system: Crosswind Assist, Body/superstructure: Standard flatbed, Keyless Start, Communication module (LTE) for digital services, Fuel tank: main tank 71 liters, Steering wheel (mech. adjustable steering column), Headlight range adjustment, Truck registration, Side marker lights, Mercedes-Benz emergency call system, Engine 2.1 L - 105 kW CDI CAT, Radio pre-installation, Wheelbase 3,665 mm, Low-emission according to Euro 6 standard, Seat belt system with warning device (driver’s side), Seat upholstery/polstering: fabric, Driver’s cab seats: passenger seat adjustable, Steel rims 6.5x16, Start/stop engine function, Preparation for DAB radio reception, Service interval display Assyst, Heat-insulating glazing, Permissible total weight 3.5 t The vehicle is in very good condition! New inspection! Full service history with Mercedes Benz. Hedpoyic Urofx Abrjnh Financing available, via Santander Bank.