Used Generator Sets for sale (17,070)

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Nkjdpfx Agoxdfazo Isu Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Nedsxdfa Uspfx Ag Isku Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Nkodpsrtrykefx Ag Ieu Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm Njdpfx Aeruakgeg Ioku 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, operating hours: 429 h, color: other, total length: 3,250 mm, total width: 1,250 mm, total height: 1,900 mm, Price: On request - Documentation available: No Nsdpfx Agsym Uzbj Ijku - CE certificate present: No - Serial number: - Operating hours: 429 - Transport dimensions: 3250mm x 1250mm x 1900mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan Nodpfxemgadpo Ag Ioku – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min Nkjdpfed Il R Aox Ag Ieu - 13 milling cutters included -

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0704-2151-0001-1, total height: 1,000 mm, total width: 500 mm, total length: 900 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 500 x 1,000 mm Njdpfjym Tckex Ag Ijku Weight: 300 kg External reference: CES - Lot 92

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HD 7/16-4ST + HWE 860, This listing refers to a Kärcher high-pressure cleaner HD 7/16-4 ST in combination with a Kärcher Hot Water Generator HWE 860 (stationary unit). The machine has been inspected in our in-house workshop and is fully functional. High-Pressure Cleaner HD 7/16-4 ST / HWE 860 Kärcher Hot Water Generator Product Description: HD 7/16-4 ST With a working pressure of 160 bar, the pre-configured cold water high-pressure cleaner HD 7/16-4 ST serves as an entry-level unit in the range of our stationary HD cleaners with single-lance operation. Our pre-configured cold water high-pressure cleaner HD 7/16-4 ST comes equipped with various features and offers multiple options for individual upgrades. A dry-running protection system and an operating hours counter are included as standard. The unit allows for the suction of one or two detergents in either high- or low-pressure mode and can be optimally configured to its place of operation thanks to an extensive accessory package (see photos). With 160 bar working pressure, this high-pressure cleaner delivers more than sufficient power to tackle even very demanding cleaning tasks. Kärcher innovations such as the EASY!Force high-pressure gun, which reduces the holding force to zero by utilizing the recoil force of the high-pressure jet, and the EASY!Lock quick-release fasteners (enabling five times faster handling compared to conventional screw connections with no compromise on robustness and durability) support the user. Kärcher Electric Hot Water Generator HWE 860: The electric hot water generator HWE 860 is used in conjunction with the HD 7/16-4 ST high-pressure cleaner and heats water up to 85 °C. Operation of this unit requires proper instruction. Nedpjymdm Tjfx Ag Ieku Description: HWE 860 Kärcher Hot Water/High-Performance Heater The electric hot water generator offers an output of 24 kW. Its use is especially recommended where burner exhaust emission is problematic or not permitted. Maximum temperature is 85 °C, thermostatically controlled. The unit can be operated manually or automatically. The device is used in conjunction with a high-pressure cleaner. The hot water generator is delivered as a standalone assembly, complete with control cabinet and all necessary components (hoses, cables, clamps, etc.). Optionally, the customer can select between cold and hot water operation via two solenoid valves and opt for a digital timer during configuration. The unit can also serve as an instantaneous water heater—for example, during continuous operation at a flow rate of 700 l/h and an inlet temperature of 15 °C, a temperature of 45 °C is achieved (a temperature increase of 30 °C). TECHNICAL DATA FOR BOTH UNITS AVAILABLE ON THE NAMEPLATES. FOR FURTHER PRODUCT DETAILS ON: HIGH-PRESSURE CLEANER HD 7/16-4 ST HOT WATER GENERATOR HWE 860 WE RECOMMEND CONSULTING THE MANUFACTURER, KÄRCHER. Subject to changes and errors. Do you have any questions, wish for a consultation, or want to view the equipment on-site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively under our General Terms and Conditions (GTC).

Condition: good (used), Year of construction: 2001, functionality: fully functional, In good condition Nkodjylhldjpfx Ag Isu

Condition: used, 1 used welding machine Manufacturer: Fronius Model: Synergic 3400 G/W/E Suitable for welding steel, stainless steel, and aluminium using the MIG/MAG process. Technical specifications: Max. welding current: 340 A Wire diameter: 0.8/1.0/1.2 mm possible Connection voltage: 380 volts Duty cycle (ED) 35% at 340 A Nksdpfx Agsyl Id To Iou Digital display Dimensions (L x W x H): 890 x 460 x 945 mm Total weight: 139 kg

Condition: used, Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Power: 3 kW Nkodpodparysfx Ag Ieu -Engine: Make Briggs

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm Nksdsyk Upyjpfx Ag Isu -Weight: 9.1 kg

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. Nksdpfx Aev N Hiljg Isu *

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Nedpfsfmim Usx Ag Ijku Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated Nedpswypqrjfx Ag Isku - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Nkodpfxoiyu Ife Ag Ieu Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Noded A Srgepfx Ag Ieku Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg sound condition

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour. Nkjdsyhc Tujpfx Ag Iou

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, dosing pump double generator -Manufacturer: Science Purge, Double Generator Dosing Pump with Accessories -Type: SC 1801 -Individual components: see photos -Submission/Price: complete Nkodpfoyk Az Rjx Ag Iou -Dimensions: 430/300/H305 mm / 225/175/H165 mm / 410/340/H185 mm -Weight: 11.1 kg / 1.5 kg / 6 kg

Condition: excellent (used), Used ultrasonic generators with few operating hours Matching sonotrodes, cables, boosters, and generators available in stock and can be purchased additionally Several ultrasonic generators available Different manufacturers and brands Brand: Herrmann Brand: Weber Brand: SONIC Nkedpfxowiw Ahs Ag Iju Brand: COMPProve Display: Digital display with LED indicator for output power (%) Output power: Continuously adjustable from 0–100% Control: On/off switch on the front panel Status indicators: Multi-colored LED indicators for operating states Housing: Robust industrial design made of metal

Condition: used, Year of construction: 2005, Capacity of the bottle filler: 10000 PET bottles/h with 485 ml Flaschen Features: Open input vessel, closed vessel with set-up-caroussel, format parts for 500 g and 285 g PET bottles Nkodpsvcqq Hefx Ag Iju

Condition: new, For sale: Professional Lowara pressure boosting system (ITT Industries – manufactured in Italy). Brand new, unused equipment. The system was installed but has not been regularly operated. Complete pressure boosting system with two pumps, integrated control panel, and TEKNOSPEED frequency inverter. Technical data: Booster unit: GTKS20 Code: 100001601 Year of manufacture: 2003 Pumps (2 units): Model: TKS2HM7ZT SW1 Power P2: 0.75 kW per pump Input power P1: 1.07 kW Voltage: 230 V / 1~ Frequency: 50/60 Hz Current consumption: 4.9 A Protection class: IP55 Control unit: Control panel QPKTS20/11 230 V 18 A IP55 Automatic pump switching. Fitted with integrated TEKNOSPEED speed controller. Condition: Nkodpfx Agjvil Iaj Ieu New – warehouse stock. No visible signs of normal use. Minor storage marks possible. Fully operational. Applications: • Pressure boosting systems • Industry and trade • Building services engineering • Water supply Scope of delivery: Complete unit as shown in the photos.

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v Nkedpfjyhc Swjx Ag Ieu - Total hydrocarbons (THC): Maximum 1 ppm - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Year of construction: 2015, condition: excellent (used), Type: DUAL-PACK 12 Serial number: 152656 P12 Year of construction: 2015 Capacity: 500 kg/24h Nedsqvnpaspfx Ag Ioku Refrigerant: R404a Compressor: Copeland Emerson ZB15KCE-PFJ-551 Generator: Geneglace F15 Power: 230VAC, 1Ph, 50Hz Dimensions: 800 x 700 x 700 mm