Used Gomaco Tc 600 for sale (13,280)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Fpjdpfx Aozv N Hpjm Esp Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: excellent (used), Year of construction: 2020, operating hours: 3,700 h, functionality: fully functional, A scrap shear in perfect condition is for sale. Fsdpe Aia S Dofx Am Eepp The machine can be inspected at any time.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h EQUIPMENT Fedpfx Aozc Euqom Ejpp Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Fjdpfxozd Ulaj Am Ejpp Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Catalog number: 7268 TECHNICAL DATA - Dimensions of the loading hopper (top): length/width 1000x600mm - Dimensions of the loading hopper (bottom): length/width 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen size: 16x12mm - Blade size: 40x70mm Fpjdpfx Amszxhh Dj Esp - Number of blades: 18 pcs - Auto-reverse - Presser drawer - Pump motor: 0.75kW - Dimensions: length/width/height 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – Made in Germany – Unpainted – Very good condition – Used shredder Original photos Video of the machine in operation: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: BROTHER (similar to Fanuc) Table dimensions: 600 x 300 mm Max. table load: 150 kg X-travel: 480 mm Y-travel: 360 mm Z-travel: 410 mm Spindle speed: 0 - 16000 rpm Taper: MAS-BT30 X/Y rapid traverses: 36000 mm/min Z rapid traverse: 50000 mm/min ATC magazine: 14 stations Tool change time: 1.1 sec Chip-to-chip time: 1.8 sec Drive power: 8.4 / 4.9 kW Power requirements: 400V, 3 phases, 50/60 Hz, 25A, 20 kVA Weight: 2900 kgs Dimensions (LxWxH): 2000 x 2700 x 2500 mm Accessories / Equipment: • Coolant system • Pallet changer (0 - 180 degrees) • Machine light • Documentation The machine has been regularly maintained and is in good used condition. Fpsdpfx Amj Ai Eyfo Eop

Condition: used, Year of construction: 2020, functionality: fully functional, Industrial Throughfeed Grinding Machine – IFS IF-Vario M1600EC Serial number: 2368 Manufacturer: IFS Machine type: IF-Vario M1600EC Total connected load: 152 kVA Total weight: approx. 12,000 kg The machine is equipped with two motor spindles, each capable of delivering a maximum power of 48 kW. The grinding process is performed using diamond grinding wheels with a diameter of 600 mm and a maximum peripheral speed of 32 m/s. The system allows for the processing of workpieces with a thickness of up to 45 mm. The adjustable grinding allowance ranges from 0.8 to 25 mm. The workpiece feed rate can be continuously adjusted within the range of 20 to 240 mm/s. Electrical and technical connection data: Supply voltage: 400 V Mains frequency: 50 Hz Rated current: 220 A Required fuse rating: 250 A Fedpfxs Ah Swto Am Ejpp Connected power: 152 kVA Control system: Siemens 840D sl Measuring and control system: DISKUS IONIC 18 Media supply: Compressed air connection: 6 bar Compressed air consumption: 150 l/min Coolant flow rate: 250 l/min Integrated extraction system Dimensions and weight: Machine dimensions including coolant filtration system: 4,600 × 5,200 × 3,000 mm (W × D × H) Machine weight: approx. 11,000 kg Total weight as stated: 12,000 kg Existing equipment: Automatic workpiece loading via conveyor system Integrated measuring probe for workpiece measurement Automatic good/bad part sorting (I.O./N.I.O.) Camera-assisted grinding wheel breakage detection Coolant supply with filtration system Extraction system

Condition: ready for operation (used), functionality: fully functional, PE/PP PIPE HEAD RK 250 / 600 Output/hour Type: PO 250/600 System with spiral distributor, without color stripes Application for PE pipes and PP pipes Max. diameter: 250 mm Min. diameter: 63 mm Max. output: 600 kg/h Condition: Very good, operational Fpedpfe Aigyzsx Am Eop The pipe head is my property. Location: Sachal Extrusion Machines Bahnhofstr. 6 D-26345 Bockhorn-Grabstede

Year of construction: 2019, condition: used, Description of the MobyLift TC The MobyLift TC is specifically designed for furniture manufacturers and interior fitters to lift wood panels from a stack or remove them from a shelf and place them on a table saw, a vertical or horizontal panel saw, or a CNC milling machine. The MobyLift is a handy tool for ergonomically lifting, transporting, and positioning all types of panels. From an operational standpoint, the MobyLift is a responsible choice: it is easy to use, reduces the number of damaged products, increases productivity, prevents back problems, and thus reduces potential work absences due to illness. Functionality of the MobyLift TC The base consists of a frame on which the counterweights, the 24V AGM battery system, and the lifting arm of the electric lifting and tilting system are located. The automatically operating vacuum device is mounted on the extension arm. A rotating and pivoting head allows the vacuum device to be manually rotated and pivoted into different positions. This head is equipped with a quick-locking system, which can block both the rotation and the pivoting, so that the products do not need to be held in place during transport. The automatically operating vacuum device consists of a frame and extendable arms, on which six stable suction cups are mounted. The vacuum system is located inside the vacuum device and maintains pressure automatically once it is switched on. The electric lifting and tilting system can be switched on using the wireless electric control. The TC is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator to continuously monitor the battery status. MobyLift TC-120-AM SL – short legs, suction cup – 1 pc. for airtight and porous materials, e.g. raw and coated chipboard, MDF, OSB, etc. Fodpfx Ae Aitddom Espp Panel size max. 2100 x 3200 mm Overall height approx. 2050 mm Load capacity max. 120 kg Lifting height max. 1600 mm Tilting angle, front/rear 100° Swiveling angle on both sides 90° Rotating angle 360° Width 800 mm Weight 175 kg Electric lifting/lowering Electric tilting Manual rotation Manual swiveling Conversion kit SL version to standard version 1 pc. Location: Supplier

Condition: good (used), Year of construction: 2001, Ref. -No.: 10617 Manufacturer: KELLENBERGER Type: 600 U Nr. 36 Year of construction: 2001 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175-250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 -5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 360° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Fedpfx As Ain Rcjm Eopp Working speeds continuously adjustable (normal / special): 20 - 400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10619 Manufacturer: KELLENBERGER Type: 600 U Nr. 35 Year of construction: 1997 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0- 5 Sec Fpsdpfxe Ain Rgj Am Eop Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360° ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, input voltage: 400 V, overall weight: 11,000 kg, Equipment: documentation/manual, saw blade guard, scorer, BIESSE Selco WNTR 600 with turning table . Made in 2003 • Max. blade projection: 132 mm • Cutting lengths: 4,500 mm • Main saw motor: 18 kW • Main saw blade diameter: 430 mm • Scoring saw blade diameter: 200 mm • Saw carriage speed: up to 150 m/min (brushless drives) • Pusher speed: up to 90 m/min • Pusher grippers: independent pneumatic grippers • Control system: OSI Plus numerical control • Machine layout: angular panel sizing possible by turning table, make it possible to cut two lines for automatic rip and cross-cutting . First time installed in 2004 and stil located on its original place , all machine function are 100% operative. Price 12 500 euro ex. VAT is included disassembling, packing and loading by crane. No VAT for sale outside Norway. Fpedpfxo Ahnc Tj Am Eep Rekman Maskin&Service work with service of Biesse machine since 1986 here in Norway.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm Fjdpfx Aoz Nn H Hsm Espp MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224198 Control: OSP-P300LA Year of manufacture: 09/2019 Fpodpfx Amj Ah Satj Esp Internal machine number: 85 Turning length: 600 mm Maximum turning diameter: 410 mm Swiveling diameter over bed: 580 mm Spindle speed: 50 - 5,000 rpm 2 tool turrets A-turret: 12 tool stations B-turret: 8 tool stations Equipment / accessories: - Chip conveyor - One Touch IGF - Blum 3D measuring probe tool monitoring system - Reinforced coolant pump, 80 bar, Interlit Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch clamping chuck, Kombi 100 - Automatic door - Touchsetter

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224197 Control: OSP-P300LA Year of manufacture: 06/2019 Internal machine number: 84 Turning length: 600 mm Maximum turning diameter: 410 mm Swiveling diameter over the bed: 580 mm Spindle speed: 50 - 5,000 rpm 2 tool turrets A turret: 12 tool stations B turret: 8 tool stations Equipment / Accessories: - Chip conveyor Fpedpfo Ah R Rrox Am Eep - One Touch IGF - Tool monitoring system Blum 3D measuring probe - Reinforced coolant pump, 80 bar, Interlit Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch chuck combination 100 - Door automation - Touch setter

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 450 mm z-travel 300 mm CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min Fsdpfx Ae Adu Tzem Ejpp rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Automatic cover feeding and creasing. Fpsdps Aaw Tisfx Am Eep The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Condition: like new (used), Year of construction: 2018, Used compressor from Airpress Type: K 200 600 Tank: 200 liters Capacity: 600 liters/min Fodpfx Amo Ai Hhmj Ejpp Max. pressure: 12 bar Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530 control unit, Working area X 600 x Y 450 x Z 450 mm Spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle Machine weight 6,100 kg, Fsdpfx Amsz Hm Dko Eopp Connection 16 kW Fuse rating 32 A Operating voltage 400 V, 50/60 Hz

Condition: good (used), Year of construction: 1988, Ref. -No.: 10396 Manufacturer: KELLENBERGER Fpjdpfx As Ahmupem Eep Type: 600 U - Nr. 40 Year of construction: 1988 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-400 Max. Grinding length: 900 mm

Condition: refurbished (used), Manufacturer: CFS Model: ER600 Condition: Machine is completely overhauled by our technical staff Serial Number: 220 Stock Number: 3322 Belt width: 600 mm Belt speed: 1.5 - 15 m/min Filling level: minimal 15 litres Fpedszcnz Hepfx Am Esp Power: 3 x 380V, 50Hz, 0.61kW Dimensions: 1400 x 900 x 1750 mm Weight: 145 kg

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:102 mm Main spindle: Technology:Direct drive spindle Speed:4,000 rpm Power:48 kW Torque:680 Nm Bar capacity:102 mm C-axis:0.001° Chuck:Hainbuch Spanntop 100 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow Clamping Cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:4.000 rpm Power:48 kW Torque:680 Nm C-axis:0.001° Chuck:Hainbuch Spanntop 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Partially Hollow Clamping Cylinder 848 mm Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 barCoolant Coolant Temperature Control Tool monitoring:Easy Tool Monitor Tool Breakage Monitoring:Swivel Wire Touch Probe:Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software Option IV:Gear Cutting and Gear Shaping Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop Fjdpfs Ah Adbsx Am Ejpp :

Condition: used, Year of construction: 1998, functionality: fully functional, Gurutzpe lathe Bed: 1,200 mm Fsdpfx Ae Ai Hk Tjm Espp Distance between centers: 2,000 mm CNC: Fagor

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Fpodpfj Ahkxcsx Am Esp Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Fpedpfsy T Ik Rex Am Esp Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!