Used Grating for sale (420)

Year of construction: 2024, condition: new, Hot air stove ,wood stove,Heating Technical parameters of the furnace Nominal heating output: 44.50 kW maximum heat output: 50.00 kW / approx. 300 m2 in set: force axial fan speed: 1350 rpm and capacity: 5060 m3 / h in the set: driver Innovative design of the air jacket that completely surrounds the stove for maximum efficiency indestructible stove made entirely of p265gh and 16m06 certified boiler plates with thicknesses of # 6mm and # 10mm large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 330 kg Gross weight: 340 kg Furnace lining: 40 firebricks removable two large cast iron grids 300 x 200 mm covered with certified heat-resistant paint that protects against corrosion and gives an aesthetic look massive structure Fjdpeixup Aofx Al Ujpn large combustion chamber large loading door User Guide Efficiency: 75.00% CO emission at 13% O2: 1.20m Type of fuel: recommended seasoned hardwood with a moisture content of ≤20% * mg/Nm3, briquettes, coal only as an admixture up to 10% Security and Certifications CE mark: YES / located on the nameplate Compliance with standard: EN13240: 2006 BimSchV level 2: Yes Dimensions External Dimensions: Overall Width: 580mm x Overall Depth: 1290mm x Overall Height: 1310mm Oven dimensions: Width: 480mm x Depth: 930mm x Height: 680mm Upper door dimensions (sheet 3 and 4mm): Width: 390mm x Height: 330mm Middle door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Bottom door dimensions (3 & 4mm sheet metal): Width: 390mm x Height: 150mm Top Loading Port Dimensions: Width: 315mm x Height: 310mm Center & Bottom Loading Port Dimensions: Width: 315mm x Height: 130mm Cast iron grate dimensions: Width: 210mm x Depth: 300mm Diameter hot air outlet: Ø 150mm Exhaust outlet diameter: Ø 150mm Leg height: 140mm Technical parameters of the fan Type of fan: axial fan Material: steel (propeller + housing) Diameter: Ø 450mm Power supply: 230V / 50Hz Engine: 4P Current consumption: 0.82A Speed: 1350 rpm Air flow: 5060 m3 / h Safety: CE mark + protective net

Condition: good (used), Included in this package: 11 x stands a 700cm x 110cm (gray) 60 x crossbars a 3600mm (gray) 120 x safety pins Results in a rack row with 10 bays each with 3 levels of floor space = a total of 160 pallet spaces (800kg per pallet) Manufacturer: Bito Type: P4 Condition: used, good condition Height: 700 cm Length: approx. 1 x 37.10m Fedpfxorhkvnj Al Uepn Shelf depth: 110 cm Bracing: screwed Truss length: 3.60 m Shelf load: 3200 kg Bay load: 9600 kg Pallet spaces: 96 Accessories such as Floor fastening connectors Load warnings collision contactors Guard rails gratings Rear wall grating Depth bars Guard rails and much more... Just ask us!

Condition: new, functionality: fully functional, Year of construction: 2026, Loading, unloading, loading dock, access, mobile ramp 10T ramp, 2M width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Ramp Grating: Galvanized grating with anti-slip grooves. Provides a secure and safe surface. Forklifts and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization and can be disassembled. ✅ Forklift Handle - installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in all directions. Specially designed handle allows maneuvering even in limited space. ✅ Chain for connection to a TIR truck, wagon, or fixed warehouse ramp: Solid steel chain is another advantage of our ramp, additionally secured to prevent ramp movement during loading operations. ✅ Sturdy side barriers: Protective barrier with the option to remove and install a frame/roof (roofing is optional). ✅ Electric height control for the ramp: Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V so it can be operated from a standard socket. ✅ Dual-sided Manual Pump: Hydraulic pump for height adjustment in case of no access to electro-hydraulic power - dual lifting. This is an excellent solution for working in any conditions. ⭐️ We offer the following variants: ⭐️ Fedpfxopk Auqe Al Uepn - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: excellent (used), You are buying mesh shelves for pallet racking with end station. Size: 1320*850 mm and 890*850 mm Height (L shape): 22 cm Material thickness: 4.24 mm Pitch: 92*48 mm Load capacity: approx. 600 kg/m2 If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale! Fjdpfepu Ad Djx Al Uspn

Condition: new, Storage platform accessories (stairs, transfer station, barrier gate, folding door) – new: Barrier gate: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: width 1500 mm, 2000 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. A customized offer tailored to your specific needs is a matter of course for us. Fodpfxjfcrwys Al Uepn Further accessories available, such as: Impact protection corners, ram protection walls, push-through guards, chipboard, grating, deep shelf profiles. Shipping: Please inquire about freight costs, specifying your postal code and location, as well as the desired quantity of items. Further service offerings: Shelving installation, maintenance, expansion, modification, and repair. Dismantling, PURCHASE, recycling, and disposal.

Year of construction: 2026, condition: new, machine/vehicle number: Al160, Compact size, high productivity food processing machine: Vegetable processor is a productive, compact-sized commercial cabbage shredding machine that is intended for cabbage shredding, slicing, grating, as well as beets, carrots grating, and julienne cutting. High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and medium-sized producing companies. General Features: • Productivity 500-1000 kg/h; • High quality, longlasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; Fpjdpfx Aedwfdqel Uon • Powder-painted frame, three-layer lacquer in the standard version, or full stainless steel version • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please ask;

Condition: ready for operation (used), Cutting area 5200 x 2100 mm Cutting depth 70 mm Manual feed Automatic swing-out grate Fpsdpfxoyrpk Ie Al Uon External dimensions (L x W x H) approx. 6550 x 1500 x 3010 mm

Condition: used, total length: 10,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, frame width: 900 mm, This package includes: 4 x uprights, 4m high x 90cm deep 12 x crossbeams, 330cm each including accessories and grating Results in a single row with 3 bays and 2 levels per bay, total length approximately 10300cm 400m available immediately! Manufacturer: Galler Type: Wide-span shelving Condition: used, good Height: 4 m Length: approx. 1 x 10.30 running meters Frame depth: 0.90 m Construction: Plug-in system Shelf load: 1200 kg per shelf Accessories such as: Floor fixing Connectors Load warning signs Impact protection Guardrails Grated flooring Rear panel grating Depth stops Barrier railings Fpodpfx Alszavi He Uon and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex warehouse. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and non-binding. Subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). No warranty for defects in used and IIa goods. The respective manufacturer's warranties apply to new goods.

Condition: new, Year of construction: 2026, Ramp 10T premium, internal usable width 2m TM-GROUP, the best choice on the market. ⭐️ Galvanized ramp grating! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum lifting capacity: 10 tons - Internal width of the ramp: 2000cm - ELECTRIC and manual control of the ramp height 1m - 1.6m - galvanized ramp grating Fpedewa Smpepfx Al Usn - Reinforced ramp barriers on both sides - Solid rubber transport wheels - Central ramp handle allowing the ramp to be moved with a forklift - Adjustment of the angle of inclination and height of the flap - Double-sided, reinforced ramp supports - Moving elements of the ramp equipped with lubricators - The ramp is also equipped with a reel ✅ Ramp grating: - Galvanized grating with anti-slip grooves. Safe and secure ground. Forklift and pedestrian traffic are guaranteed the best possible traction and solid support. The competition mainly offers ramps in which the approach is made of sheet metal covered with mesh. Our product has the aforementioned grid with grooves - a much more durable solution, thanks to which dirt from under the forklift wheels does not remain on the ramp, and the truck itself does not slip. ✅ Forklift handle - can be installed on both sides: - Convenient and quick attachment for the forklift allows the ramp to be transported in all directions. A specially designed handle allows the ramp to be maneuvered even in limited space. ✅ Chain for connecting to a TIR, wagon or permanent warehouse ramp: - A solid steel chain is another advantage of our ramp, additionally, the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side barriers: - Safety barrier with the possibility of unscrewing and installing a frame/roof (roof is optional). ✅ Electric control of the ramp height: - Smooth electro-hydraulic drive uses a high-class pump. The pump requires 230V, so it can be operated from a regular socket. ✅ Double-sided hand pump: - Hydraulic pump for height adjustment in the absence of the possibility of connecting to the electro-hydraulic power supply - double-sided lifting. This is an excellent solution ensuring work in all conditions. ⭐️ We offer the following variants: ⭐️ - Driveway width in the ranges of 1700 cm, 2000 cm and 2500 cm Standard, Premium and Premium plus. - Mobile ramps with a load capacity of 10 tons, 15 tons and 20 tons and 25 tons. - Thickness of driveway grids 3 - 5 cm. - Colors: red, blue, black and green (it is possible to produce a ramp in any color - individual order) - Mobile ramp with tarpaulin. As a manufacturer, we can produce ramps for special, individual orders - with different dimensions, load capacities or variants. Do you need an individual solution that you cannot find by browsing all the ads? Ask our specialist. Tags: Loading ramp, unloading ramp, loading ramp, mobile ramp, loading dock, loading dock, mobile loading ramp, mobile loading ramp.

Condition: new, Year of construction: 2026, 20T Premium Plus Ramp, usable internal width 20m. TM-GROUP – the best choice on the market. ⭐️ Galvanized grid on the ramp’s upper section as well! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grid also on the upper ramp section (highlighted in red in one of the last photos) - ELECTRIC and manual height control from 1m to 1.6m - Galvanized approach grid - Reinforced side railings on both sides - Solid rubber transport wheels - Central ramp handle allowing repositioning with a forklift - Adjustable tilt and flap height - Reinforced dual-sided ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a hand winch ✅ Approach Grid: Galvanized grating with anti-slip grooves. A secure and stable surface. Both forklift operation and foot traffic benefit from top-tier grip and solid support. Competitors mainly offer ramps with a metal sheet covered in mesh. Our product features a grooved grating, a much more durable solution. It prevents debris from staying on the ramp and ensures forklifts don't slip. ✅ Forklift Bracket – installable on both sides: Convenient and quick mounting for forklift transport in all directions. A specially designed bracket allows for maneuvering the ramp even in confined spaces. ✅ Chain for connection to TIR truck, railcar, or fixed warehouse ramp: A solid steel chain is another strong point of our ramp, preventing unwanted movement during loading operations. ✅ Durable Side Railings: Protective railing with an option to unscrew and mount a frame/roof (roof is optional). ✅ Electric Height Control: Smooth electro-hydraulic drive using a high-quality pump. Requires 230V, meaning it can be powered from a standard socket. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment when electro-hydraulic power isn't available – dual-direction lifting. Perfect solution for uninterrupted operation in any conditions. ⭐️ Available variants include: ⭐️ - Approach widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus versions - Mobile ramps with capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Approach grid thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarpaulin cover As a manufacturer, we can produce custom ramps tailored to specific needs – various sizes, load capacities, or features. Can't find exactly what you're looking for in the listings? Ask our specialist for a tailor-made solution. Tags: Loading ramp, unloading ramp, mobile ramp, mobile loading dock, loading bay, mobile transfer ramp, mobile loading ramp. Fpodpfx Aewb A Eljl Uen

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) Fedpfx Aleyhkquo Ujpn - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Fpjdpfx Alsyfvg As Usn Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? Fpsdpfsxa H Ewox Al Uen We are happy to assist you.

Condition: used, Year of construction: 2013, functionality: fully functional, total length: 20,000 mm, We are selling used linear carwash from well known manufacturer CHRIST, year of production 2013. Carwash is complete, without chains and dry wiping. Approximate length of carwash is 20 metrov. Including: • Advertising and foam spraying portal • Double-sided brushes for washing side skirts and rims • High pressure washing portal • Portal for washing with textile brushes • Driers • Waxing platform Fsdpfxsxy E Azo Al Uspn • Detergent dispenser • Floor gratings Suitable for companies that want to increase vehicle washing capacity or install a new washing line with reliable equipment.

Condition: new, NEW PRODUCT Price plus VAT. The goods are also available in other quantities and configurations. Fpsdpfeyh Dttjx Al Usn Included in this package: 11 uprights each 220 cm high x 40 cm deep 60 shelf panels each 130 cm x 40 cm 240 shelf supports 6 diagonal braces with tensioners This results in a single row with 10 bays and 6 levels per bay, total length approx. 1306 cm. 400 meters immediately available! Manufacturer: META Clip Type: Shelving rack Condition: New Height: 220 cm Length: approx. 1 x 1306 cm Frame depth: 40 cm Design: Boltless system Shelf load: 150 kg per shelf Accessories such as: Floor anchors Connectors Load warning signs Collision protection guards Guard rails Grated shelves Back mesh panels Depth beams Barrier rails and much more... Simply send us your inquiry!

Condition: used, Pallet racking system by Voest, approx. 55 linear meters, used 🧰 Product features • Manufacturer: Voest • Color: green • Condition: used, see photos • Frames: 13 pcs., pre-assembled, 400 x 110 cm • Beams: 48 pcs., with a clear span of 426 cm, profile 150 x 50 mm • Safety: 96 pcs., galvanized safety pins • Fasteners: 52 pcs., Hilti concrete anchors • Load capacity: 1,600 kg per level • Field load: 8,000 kg • Load capacity label: included Over 1,000 linear meters in stock Frame heights up to 10 meters Available depths: 75 cm and 110 cm Available beam lengths: 426 cm and 566 cm Matching depth beams, insert gratings and insert shelves available upon request 💰 Price €2,250 net, excluding VAT • Quantity discounts: upon request • Shipping costs: Europe-wide, upon request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment • Product number: P10433 Constantly over 5,000 linear meters of pallet racking systems from numerous manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking systems, used & new Description: Fsdszg U Adopfx Al Uspn Are you looking for high-quality storage racking systems to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking systems immediately available • 20,000 m² of mezzanine floors & steel platform structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racks (Elvedi cantilever racks, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough clearance. 2. Commission auction: Conducting auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. Fodpfx Ajxpvkhol Uspn What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Fodpeyku I Nefx Al Uepn Brand: Odenberg / Tomra Control System: “Tomra” Touchscreen Panel Technical Specification: - Optical Sorter: Odenberg with mechanical finger ejection system - Infeed Hopper: steel construction, with side and top inlets - Conveying System: rising inclined conveyor belt, overhead feed conveyor belt - Water Section: 2 submersed conveyor belts - Feeding Section: cross-flow feed with vibrating grate and conveyor belt - Installation footprint: Total usable floor area: 10,500 x 4,750 mm Set includes platforms with slatted flooring An advanced potato sorting line based on Odenberg and Tomra optical technology, providing a complete solution for modern processing facilities. At the heart of the system is a precision optical sorter with mechanical ejection, operated by the intuitive Tomra interface, enabling rapid product selection by quality and size. A unique feature of the line are the two underwater conveyor belts, ensuring extremely gentle handling of the produce and minimizing bruising and mechanical damage.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DTS Bend Screen – Stainless Steel Curved Sieve Brand: DTS Fjdpfx Alsyku E Io Uopn Type: Bend screen (slot/curved screen) Year of manufacture: 2019 Overall dimensions: 700 x 1300 x 2800 mm Working width: 650 mm Intended for first-stage separation Without platform and grating floor The DTS steel bend screen is a modern machine designed for high-performance separation of solids from liquids in industrial processes. Thanks to its 'Bend Screen' construction with a 650 mm working width, this unit is ideal as the first stage of process water treatment or raw material recovery. The machine utilizes gravitational liquid flow across the curved screening surface, providing effective solids separation without the need for mechanical drives in the filtering section.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 Construction: steel + aluminum Working area: 4000/2000/200 XY axis drive: double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion Z axis drive: stepper motor, ball screw Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files via external pen-drive Sheet detection system THC height control system TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion Y axis: stepper motor and rack and pinion Z axis: stepper motor and ball screw Drives implemented using TBI HGR 20 rails Table equipped with a water table (water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) INCLUDED: - water table - replaceable grating - control program in Polish - CE declaration of conformity - technical documentation - warranty - commissioning and training included in the price The latest control system available in our cutters: Fpodpfx Alsiphrlj Ujn Integrated THC height regulator Anti-torch dive function Accepted file types: DXF, PLT (hpgl), G-Codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Cutting parameter database Project angle correction to material Ability to cut from any location Ability to cut from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to the material layout angle Soft and Hardware limits THC anti-dive functions Game Pad control possible Material detection via touch system, floating head WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY; THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFESPAN, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUSCEPTIBLE TO DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET CUSTOMER REQUIREMENTS WE HELP IN ARRANGING LEASING Possibility to select the appropriate cutter to meet the individual needs of the company. We offer other table sizes.

Year of construction: 2020, operating hours: 4,707 h, condition: used, 2020 | Geowell Grating 220 | Used Small Equipment | 4707 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Fpedpfxjznfdbo Al Usn 8 inspection points 8 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Wheelwashing unit , has not been working for a long time , not operationally tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40943 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line Fpsdpfx Alsp T Tghj Ujn

Condition: good (used), Vogelsang MP 825 Pallet Racking System Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per bay (distributed across 4 levels with 3 Euro pallets side-by-side, with a bay width of 2,700 mm). The system consists of 1 base bay and 7 extension bays, resulting in a total length of approximately 22 meters. Thanks to the grid decking, the racking is extremely versatile – also suitable for individual items, picking goods, or damaged pallets. The push-through guards and back panel grates included in the scope of delivery ensure maximum safety. Perfect protection against accidental pushing through or dropping of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22,000 mm Height: 6,200 mm Depth: 1,200 mm Bay width: 2,700 mm Bays: 8 Levels: 4 incl. ground-level space Crossbeam type: INP 100 Load per beam: 3,000 kg Fjdpfxjzrlp Ss Al Uepn Load per bay: 14,000 kg Scope of delivery: 09 x Support frame 6,200 x 1,200 mm, blue 48 x Pallet racking crossbeam 2,700 mm, red 24 x Push-through guard 2,700 mm 32 x Back panel grate 2,700 x 1,200 mm 48 x Grid decking 1,330 x 1,200 mm Your partner for safe storage logistics: Assembly, disassembly & racking inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a renovation, or a warehouse liquidation – we handle the professional assembly and disassembly of your systems: - Pallet racking (heavy-duty & standard) - Shelving systems for small parts and archives - Storage platforms for optimal use of space Racking inspection & inspection according to DIN EN 15635 Safety is a legal obligation. We carry out the annual expert inspection (in accordance with DGUV rule 108-007): - Inspection for deformations and damage. - Inspection of safety pins and load signs. - Creation of a legally sound test report including a test label. "We offer you a suitable financing option for your project from a single source." You can find more articles – new and used – in our shop! International shipping costs on request!

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-scale, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical Data and Equipment • Large-area filtered supply air ceiling panel approximately 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h Fjdpfx Alsz Ikyre Uepn • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control panel • Cabin lighting • Sale includes the system as it currently exists on site Condition and Use Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface finishing, including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and Dismantling Conditions Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer is responsible for organizing the necessary skilled personnel as well as lifting, dismantling and transport equipment. The complete dismantling and removal must be completed by July 31, 2027, at the latest. Note: Technical data has been compiled based on available documents, nameplates and the current condition of the system. Information is provided without guarantee. The condition and scope determined during inspection shall prevail. Selling price: 31,500.00 EUR Price is net, any applicable statutory taxes and duties are excluded. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), load capacity per storage section: 3,200 kg, support length: 3,600 mm, frame height: 7,000 mm, 164 linear meters of pallet racks from the manufacturer Stow, model PAL-Rack, equipped with high-quality hot-dip galvanized heavy-duty mesh panels for flush installation in the beams! Fedjyw N Rmopfx Al Uopn Very good condition, inspected annually and reconditioned as necessary. The offer includes: 45 frames 7m x 110cm (height x depth) and 360 beams 360cm, as well as locking pins and 480 galvanized mesh panels for flush placement on the beam levels! This provides up to: 900 Euro pallet storage spaces and approx. 164 linear meters of racking. Bay load: 18.7t and shelf load: 3,200kg. Net price plus VAT. The racks have been professionally dismantled and are in stock, so they are immediately available. Delivery by freight forwarding is possible throughout Europe for an additional charge.