Used Gratings for sale (359)

Condition: excellent (used), Weiss temperature chamber Here we offer a Weiss temperature chamber. Weiss temperature chamber air cooled with Weiss condenser cooler Test chamber capacity approx. 990 liters Data for temperature tests: Temperature range -40°C to +180°C Temperature deviation in time in center of chamber ± 0,1 to ± 0,5 K Temperature deviation spatially ± 0.5 to ± 2.0 K Temperature gradient (acc. to IEC 60068-3-5) 1 to 4 K Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min Heat compensation max. 4500 W Feedthrough built into basic equipment R1: NW 125 mm L1: NW 50 m Dimensions: Test chamber dimensions: Width 1100 mm x depth 950 mm x height 950 mm Housing dimensions: width 1390 mm x depth 1525 mm x height 1995 mm maximum load (evenly distributed over the surface) of the test chamber floor 150 kg per insert grate 50 kg total load of the grate supports 100 kg Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11,5 kW Rated current 22 A Heat output water-cooled test chambers max. heat output to environment 1.3 kW Noise measurement: Sound pressure level approx. 64 dB(A) Refrigerant: ( converted to R-452a ) weight: approx. 840 kg Type: WT11-1000/40 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate Kdsdpfxsp Dun Ue Ab Tjh 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site Kdedpfsvba Raex Ab Teh test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark metal analyzer Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Kdodpjv Hbvbsfx Ab Tsh Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Optical emission spectrometer Ultima 2 benchtop device, sequence spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order 160-800 nm without image Quick overview analysis IMAGE: Quick overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the Ultima 2's HF coil Argon humidifier - for analyzing solutions with a high salt content. ULTIMA 2 ICP-OES - Optical Emission Spectrometer reliable high-efficiency 40.68 MHz semiconductor generator complete and precise wavelength scan from 160 to 800 nm as standard highest practical resolution Kdjdpfxsur Rmvo Ab Tjh

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2 for construction equipment and aerial work platform transport. Truck equipment: - Long-distance driver cab - Auxiliary heating - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation - 26,000 kg GVW - Automatic climate control - White - for long-distance transport - etc. Body: - Body manufactured from laser-cut and bent special profiles in low-bed design - Body length approx. 8,800 mm minus toolbox approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 track ramps, each consisting of 1 fixed section and 1 extendable section, lateral sliding adjustment, grated surface, mechanical ramp locking with holders on outer frame for non-use (optionally with strap securing) - Ramp operation via electro-hydraulic unit, incl. emergency control at manifold block and hand pump for total system failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grated floor with increased load capacity - Rear end with bevel – front bulkhead approx. 2,000 mm high with inward-bent profiles - Stainless steel toolbox inside in front of bulkhead - 2 stainless steel side toolboxes on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear cab wall, 2 pairs on frame sides, 2 pairs at rear - 2 sets of steps for access to the cargo area Load securing: - Longitudinal members incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into longitudinal members Kjdpfx Aew E Abneb Tsdh - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6-ton lashing points integrated into the outer frame - 4 x 6-ton lashing points at the rear - 4 x 6-ton lashing points below, in front of the front bulkhead toolbox Paintwork: - Body powder coated in RAL 9005 black (KTL process) - Bulkhead painted in RAL 9005 black - Ramps and gratings hot-dip galvanized Markings: - Reflective tape on sides and rear to EU regulations. Further information available on request.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine/MEWP transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - High-safety long-distance FH cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Gearbox/I-Shift operated via driver's seat control unit - I-Shift drive modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco Cruise Control (cruise control) including brake cruise control - Manual gear selection possible in automatic mode (incl. kickdown) Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo engine brake - etc. WIESE body for MEWP and construction machine transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Body dimensions: - Length: approx. 9,050 mm usable - External width: 2,550 mm - Loading height top of floor: approx. 1,050 mm unladen - Robust, weight-optimized welded steel construction, box-section design - Short cross member spacing for high point loads - Tapered rear for low ramp angle - Outer frame profile 90° - Front wall in reinforced version - Internal toolbox at the bottom in front of front wall - Grating floor - Designed for 5,000 daN wheel load - Steel sheet boxes above axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 to., recessed into outer frame - Longitudinal members each with Multi-X contour along full length with numerous 2.5 to. lashing points - 4 lashing eyes 8 to. recessed at rear (left/right/center/center) - 4 lashing eyes 8 to. recessed in front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable units, both ramps laterally adjustable - Ramp can be used as drive-on ramp and as through ramp for warehouse equipment (extension section remains closed), the fixed ramp part is placed on the loading dock - Robust tension bar for transport securing (alternative: strap tensioning) - 2 hydraulic rear supports with pads, with warning buzzer and indicator in cab - Ramp and support operation via electro-hydraulic system - Remote control and emergency control on the control block - Stainless steel control box mounted on frame side - Superwinch 8.2 t with approx. 20 m steel cable Ksdpfjw Itmrsx Ab Tsdh - Step access with grab handles left/right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, extra charge) - Side skirting as per sample pictures (green vehicle) optional, extra charge - KTL body coating - Trailer coupling with 3.3 t ball head at rear - 4 LED work lights - 2 LED taillights mounted high on front wall - 4 external LED work lights on frame as area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (external frame painted in RAL color of your choice on request).

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, gearing type: automatic, axle configuration: 3 axles, overall weight: 26,000 kg, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a construction machinery and access platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - 1 sleeping bunk - Refrigerator - Navigation system - 26,000 kg gross vehicle weight - Automatic climate control - White - Long-distance specification - etc. Body: - Superstructure made from laser-cut and bent special profiles, low-floor design - Body length approx. 8,800 mm (minus approx. 490 mm for storage box) - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 ramp units, each with 1 fixed section + 1 retractable section, ramps can be shifted laterally Kedpfjw E Abhox Ab Tsdh - Ramp surface made of grating, mechanical ramp locking including bracket on the outer frame for storage (straps available on request) - Ramp operation via electro-hydraulic aggregate, incl. emergency control unit on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions can be operated via radio remote control - Grating floor with increased load capacity - Rear with bevel, front wall approx. 2,000 mm high with inward-bent profiles - Stainless steel storage box inside in front of the front wall - 2 stainless steel side toolboxes on the chassis for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Working lights: 1 pair on the rear wall of the cab, 2 pairs on each chassis side, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour including lashing points (2.5 t each) - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame with perforated design including 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into outer frame - 4 pcs. 6 t lashing points at the rear - 4 pcs. 6 t lashing points ahead of the front wall storage box (lower side) Paintwork: - Body KTL powder coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and gratings are hot-dip galvanized Markings: - Reflective tape on sides and rear according to EC standards. Further information available upon request.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-Axle Volvo Machine/Platform Transporter FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - Safety long-distance driver cab FH - Cab autonomous heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Transmission / I-Shift control via driver's seat control unit - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco cruise control (cruise control), including braking cruise control - Manual shifting possible in automatic mode (incl. Kickdown, adaptive traction control) - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (on both sides) - Driver alert system for fatigue warning - VEB Volvo Engine Brake Kodpfx Ajw Itl Usb Tjdh - Etc. WIESE body for platform and construction machine transport with hydraulic loading ramps - With 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height to upper edge of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, volume design - Short cross member spacings for high point loads - Rear tapered for low approach angle - Outer frame profile 90° - Front wall, reinforced version - Storage box inside, below the front wall - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with continuous Multi-X contour along the full length with numerous 2.5 t lashing points - 4 lashing eyes, 8 t, recessed at the rear (left/right/center/center) - 4 lashing eyes, 8 t, recessed in front of the front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as two individual/extendable pieces, both laterally adjustable - Ramps can be used as approach ramps or as drive-through ramps for material handling equipment (extension section remains closed), fixed section placed onto the building ramp - Sturdy locking bar for transport security (alternative with belt tension) - 2 hydraulic rear supports with pads, buzzer and control light in cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency operation at the control block - Control block mounted in stainless steel tool box at side of frame - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access steps with handrails right and left for access to load area - 5 stainless steel toolboxes in drawer design, incl. lighting as option (surcharge) - Side panels as per sample pictures (green vehicle) optional (surcharge) - Body coating KTL - Ball hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high at the front wall - 4 LED work lights on frame sides as ambient lighting - 2 LED work lights at the rear - 1 removable rotating beacon at rear The stock vehicle comes with white cab and superstructure in Novagrau (outer frame paintwork according to RAL color of your choice upon request, price on application).

Condition: new, mileage: 100 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new Mercedes Benz Actros 2540L 6x2, configured as a transporter for construction machinery and aerial work platforms. Kdsdpfx Abew E Aawe Toh Truck equipment: - Long-distance cab (sleeper cab) - Auxiliary heater (parking heater) - Safety package - Driver comfort package - Trailer package - Steering tag axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Beacon lights - Multifunction steering wheel - Single bunk - Refrigerator - Navigation system - GVW: 26,000 kg - Automatic climate control - White paintwork - suitable for long-distance transport - etc. Body: - Body manufactured from laser-cut and folded special profiles in low-bed design - Body length approx. 8,800 mm, minus tool box approx. 490 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each with one fixed section and one extendable section, ramps laterally adjustable - Ramp surface made of grating floor - Mechanical ramp locking including holders on the outer frame when not in use (optionally with strap securing) - Ramps operated by electro-hydraulic unit, including emergency controls on the control block and hand pump for total failure - Hydraulic rear supports - All hydraulic functions controlled via radio remote control - Grating floor with increased load capacity - Rear section incl. chamfer - Front wall approx. 2,000 mm high with inward-folded profiles - Stainless steel tool box installed in front of the bulkhead - 2 stainless steel tool boxes on the frame sides for lashing materials (1 left, 1 right) - 1 stainless steel tool box rear right (for hydraulic unit and control block) - Work lights: 1 pair on cab rear wall, 2 pairs on sides of the frame, 2 pairs at the rear - 2 access ladders for load area access Load securing: - Longitudinal beams with Multi-X contour incl. 2.5 t lashing points - 6 pairs of 6 t lashing points integrated in the longitudinal beams - Outer frame with perforated design featuring 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points in front of the forward bulkhead tool box (beneath the floor) Paintwork: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grating floors hot-dip galvanized Adhesive markings: - Side and rear reflective film in accordance with EC regulations. Further details available on request.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine transporter/platform lift transporter - FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - FH high safety long-distance cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment under the bunk - Air suspension on front axle(s) - Transmission/I-Shift operation via control unit on driver's seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control) including brake cruise - Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency braking - Lane keep assist - Side collision avoidance and turning assistant (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for platform lift and construction machinery transport with hydraulic loading ramps Includes 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Length approx. 9,050 mm useable length - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, box section design - Short crossmember spacing for high point loads - Rear end tapered for low approach angle - Outer frame profile 90° - Front bulkhead reinforced version - Storage box inside front lower area - Grated floor Ksdpfx Abew Itmlo Tedh - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame - Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t - 4 lashing points 8 t recessed at rear (left/right/center/center) - 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable ramps, both ramps laterally adjustable - Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay - Sturdy locking bar as transport security (optionally with belt system) - 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab - Ramp and support operation by electro-hydraulic system - Control via wireless remote and emergency controls on manifold - Control manifold mounted in stainless steel toolbox on chassis side - Superwinch winch 8.2 t with approx. 20 m steel cable - Access steps with handrail right and left for deck access - 5 stainless steel toolboxes in drawer version, with lighting as optional extra - Side skirts as per sample photos (green vehicle) as optional extra - Body coating KTL - Ball-type trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights on outer chassis as perimeter lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).

Condition: excellent (used), Year of construction: 2005, Mawera FSB 700 – Fully automatic biomass boiler with moving grate (wood chips), year of manufacture 2005, for sale. The fuel feed is hydraulic, not by screw conveyor. Components: Boiler body, combustion chamber and heat exchanger, complete hydraulic feed unit, flue gas fan, multi-cyclone, ash separator, chimney piping, control system, electrical control cabinet, operating manual. The system can be inspected in operation on site. Kedpeya Ngxjfx Ab Tedh Dismantling is possible after the heating season. Condition: Excellent Manufacturer: Mawera Model: FSB 700 Year: 2005 Video available via Whatsapp

Condition: used, Year of construction: 1996, Kohlbach SU 1200 chip-fired boiler complete system, stepped grate firing (suitable for low-quality fuel), hot water system with max. temperature 120°C, output 1200kW, year built 1996, including pneumatic cleaning system, flue gas dedusting with multicyclone separator, flue gas fan, flue gas piping, chimney system – height 26m, two-part bolted construction (2 x 13m), automatic ash removal downward into ash bin, hydraulic feeder, hydraulic cross-pusher rod, walking floor with 3 pusher rods, total length 11m, total width 5.7m, control system included. The system is fully operational and, for its year, in very well-maintained and good condition. Dismantling must be carried out by the purchaser. Dismantling scheduled for June 2026; the boiler house roof will be opened on site to lift out the heating unit using a crane. The crane can approach up to approx. 5m from the roof opening. Kedpfx Abovytfue Tedh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, power: 650 kW (883.75 HP), Woodchips fueled air heater. For grain kilns or industrial halls. Fully automatic with ignition. Have wery low hours- used only 2 seasons. Last 11 years stayd in dry room. Hydraulically driven grates for best burning process. Kdedpswxq D Refx Ab Tjh Has hydraulically driven storage, fan and all includings. Automatical ash conveying.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Kdedpoxa H Ewjfx Ab Tjh It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2026, functionality: fully functional, air demand: 1.13 m³/h, pressure: 7 bar, warranty duration: 24 months, total width: 1,370 mm, total height: 2,080 mm, total length: 1,150 mm, overall weight: 350 kg, Equipment: cabin, lighting, The Vapormatt PUMA is a high-quality and versatile manual wet blasting cabinet from Vapormatt, the leading company in the wet blasting segment and the inventor of this technology in the 1950s. With over 70 years of continuous development in wet blasting, the Vapormatt PUMA has evolved into an ergonomically optimized and efficient machine. A removable basket allows for processing of small batch parts, while a clamping device enables simple handling of rims or wheels. Large workpieces weighing up to 125 kg can be placed on the robust stainless steel grate. An optional stainless steel rotary table is available for easy handling of heavy items. The integrated recirculating water system with cascade tanks, filtration unit, and return pump ensures economical use of water and consumables. Wet blasting is gentler and more consistent than, for example, sandblasting, thanks to water as the carrier medium. With this technology, you can achieve smooth and uniform finishes on your parts. Technical data: - Internal dimensions: 1100 x 1100 x 1200 mm (L x W x H) - External dimensions: 1400 x 1200 x 2100 mm (L x W x H) - Pump power: 2.2 kW (400 V / 50 Hz) - Sump volume: approx. 142 L water / approx. 15-40 kg blasting media - Load capacity of work surface: 125 kg All prices are net, plus the currently applicable statutory VAT and shipping costs. Some images may show the unit with accessories which are optionally available and subject to additional costs. Kjdpfjtqmh Eox Ab Tjdh If you are interested, we look forward to hearing from you. We provide professional and non-binding advice. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, messaging portal). In the first step, we provide you with a non-binding quotation and inform you about our general terms and conditions, legal notice, and your right of withdrawal before any purchase/contract is concluded.

Condition: good (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, GIPOREC R110 FDR tracked mobile plant comprising a feed hopper of approximately 10 m³, a vibrating feeder, a pre-screen with divergent bar grate, an impact crusher with 1100 x 900 mm opening, a discharge conveyor beneath the crusher, a fines discharge conveyor, a CAT diesel engine, and a hydraulic unit for auxiliary power requirements. Kdjdpox Tr Itefx Ab Tjh

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Kdedpfxef Hqavj Ab Toh Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power:1000W

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Kdsdpfx Abex Tilie Tjh Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Distance between rollers:

Condition: excellent (used), Used heatable/coolable agitator tank with anchor agitator Type: CILC3000TPRWA Item number: 10865 Last intended use: Food Volume: Approx. 3150L Type: Upright design on four height-adjustable feet Design: Min. 2mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Internal weld seams: Ground Operating pressure: Atmospheric Thermoplate operating pressure: Max. 1.8 bar Operating temperature: Max. +95°C Top plate: Central cross member with two hinged lid halves Bottom plate: Conical bottom with central outlet Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2700mm Feet height: 580mm Equipment: -Thermoplate (double jacket) for heating/cooling, H=1000mm, around the cylinder. Part of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -Thermoplate (double jacket) for heating/cooling on the bottom of the tank, inlet/outlet connection 3/4" nipple, max. operating pressure 1.8 bar -1x hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in a 90° open position) -2x metal grates below the hinged lid as anti-soap protection, screwed, removable -Cross braces welded between the feet -1x agitator flange connection -1x spare connection DN50 DIN11851 on the top plate with blind cap -Outlet DN50 DIN11851 Handle extends to the front, adapter shaft, guide plate -1x nameplate Agitator: Anchor agitator Max. viscosity: 20,000 mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTFGH/1.5-10 Power: 1.5 kW Speed: 0-11 rpm Operating voltage: 3PH 400 V Material in contact with product: 1.4301 stainless steel -Motor and gearbox manufactured by Getriebebau NORD -Gearbox with food-grade oil filling -Solid agitator shaft with double bearings in the gearbox -Agitator shaft balanced for smooth running across the speed range -Anchor agitator made of 60x60 square tube, welded design -Stainless steel flange with EPDM V-ring seal Agitator control: Kedpewfnpqjfx Ab Tedh CEE plug-in switch on the tank with on/off switch, phase inverter, zero-voltage release, and emergency stop, pre-wired Continuous speed control of the agitator motor via a compact, external frequency converter, manufactured by Optidrive Operating voltage: 3PH 400V

Condition: good (used), Used stainless steel agitator vessel with double jacket Item number: 10492 Final use: food Volume: approx. 1400 litres Type: Standing on 4 feet Material (wetted): 1.4301 stainless steel Design: With double jacket Manhole: 1250x420mm Hinged cover on both sides Base: Vaulted Top panel: Hinged lid Operating pressure according to type plate: ATM Tank dimensions: Outside diameter: 1460mm Cylinder height: 870mm total height: 2040mm total width: 1460mm height of the feet: 560mm materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 facilities: Ksdpfxefiguuo Ab Tjdh Double Jacket Nameplate: yes Outlet: 70mm Various connections Gratings Agitator

Year of construction: 2025, condition: new, Brand new stainless steel agitator tank with beam agitator and load cells CILC2000RWS Volume: 2107L Dimensions approx.: Ø 1430mm x cyl. Height 1250mm Total height: approx. 1650mm (plus agitator motor) Material: 1.4301 stainless steel V2A Surface: inside BA (IIId), outside satin finish Welding seams in the container ground -Standing design on three feet -Top: hinged lid, central crossbar with 2 hinged lid halves with locking function (can be locked in 90° open position) -Metal grates below the hinged lid as protection against soap, screwed, removable -Bottom: conical bottom with central outlet DN50 DIN11851 nozzle -Agitator flange on the top -1x reserve nozzle DN50 DIN11851 on the top with blind cap -Type plate -180° spray head Kdjdjvtyf Iopfx Ab Tjh - Weighing cells - Speed control Agitator: Bar agitator Make: Schwarzer Rührtechnik GmbH Type: SRTGMK/1.5-149 Power: 1.5KW Speed: 149RPM Operating voltage: 3PH 400V -Gearbox made by Getriebebau NORD -Solid agitator shaft with sleeve coupling attached to the gear motor, removable -Agitator shaft balanced for concentricity in the speed range -2 2-blade bar agitators Ø 500mm, height adjustable on the agitator shaft, attached via side power screws Grilled and passivated -Stainless steel flange with shaft seal and O-ring seal -MFR converter

Condition: new, Factory new stainless steel tank Item number:10639 Volume: 335 L Type: Hanging Material (wetted): 1.4301 / AISI304 Type: double jacket Hinged cover: 180x570 mm Working pressure according to nameplate: ATM Tank dimension: Outer diameter: 750mm cylindrical height: 870mm Total height: 1250mm Total width: 830mm Total length: 920mm Materials: Inside: 1.4301 / AISI3304 Outside: 1.4301 / AISI 304 Kdodoiaup Nspfx Ab Tjh Facilities: Nameplate: No Outlet diameter: 1. DN40mm / 2. 45mm Various connections Gratings

Condition: like new (used), Equipment: type plate available, Used stainless steel transport container Prepared for agitator Type: SBPA150 Item number: 10796 Volume: 173 liters Type: Upright design on pallet Design: Single-walled, 1.5mm wall thickness Material (wetted parts): 1.4301 stainless steel Surface: Satin-finished outside, IIId inside Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: 1/2 hinged lid Underbody: dished bottom with outlet bead Tank dimensions: Tank diameter: 650mm Total height: 815mm Pallet: 675 x 719mm Equipment: 1x 1/2 hinged lid on the top, latching function (lid can be latched in open 90° position) Stainless steel sheet metal grates underneath the hinged lid, screwed, removable DN50 ball valve outlet fitting DIN11851 Kdsdpfx Aor A Engjb Tjh Galvanized transport pallet Type plate

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Ksdpfx Abjv Ha Uie Tjdh Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: used, his listing is for the BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The unit is in full working condition and is ready for immediate use BIOCHROM WPA Biowave II UV/Visible Spectrophotometer The Biochrom WPA Biowave II is a compact, high-performance UV/Visible spectrophotometer tailored specifically for life science laboratories. It integrates advanced optics, user-friendly design, and flexible analytical capabilities, making it a go-to instrument for researchers performing nucleic acid and protein quantification, among other applications. Key Features and Benefits Wavelength Range: 190–1100 nm (UV and visible spectrum) Optical Design: Monochromator with holographic grating — novel optics with no lid or moving parts Detector: High-resolution 1024-element CCD array Light Source: Long-life Xenon lamp for energy efficiency and extended performance Display: Graphical backlit LCD for easy visualization of wavelength scans, kinetic assays (with slope calculation), and standard curves Sample Volume: As low as 10 µL with quartz cells (ideal for precious or limited samples) Cell Compartment: Designed for 10 µL volume, compatible with quartz cuvettes Data Export Options: USB interface (CSV format), integrated graphical thermal printer, or PC via Print Via Computer (PVC) software (included) Pre-Defined Methods: Nucleic acids (DNA, RNA, oligonucleotides), proteins (BCA, Biuret, Bradford, Lowry), and cell culture (cell density) Measurement Modes: Kdsdpfxexl Eyqe Ab Teh Fixed wavelength (Abs/%T) Absorbance ratio Concentration (standard curve, factor) Multi-wavelength Kinetics Life science methods Cell density Scientific Applications Nucleic Acid Quantification & Purity Checking: Visual scans reveal impurities (e.g., 230 nm region for RNA) Protein Assays: BCA, Biuret, Bradford, Lowry Cell Density Measurements Kinetic Studies: Real-time monitoring of reaction rates Low Volume Samples: Ideal for precious or limited biological materials