Used Grinder Air for sale (26,357)

Condition: used, axle configuration: 3 axles, first registration: 07/2003, total length: 12,000 mm, total width: 2,550 mm, total height: 3,600 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2003, Equipment: ABS, = Additional Options and Accessories = - Alloy wheels - Air suspension Dwedozrdgispfx Apwoa = Further Information = Tire size: 385/65 R22.5 Axle brand: SMB Brakes: Drum brakes Suspension: Air suspension Unladen weight: 5,940 kg Payload: 32,060 kg GVWR: 38,000 kg Tipper: Rear

Condition: good (used), Motor output 1 kW Dedpfovwgn Rox Apwjwa Max. pressure 16 bar

Condition: excellent (used), Risco TR130 fresh meat grinder. Fully rebuilt. This grinder has a 200-litre bowl capacity and a 130-mm output grinding plate size. All s/s. Dwodox Sqwqjpfx Apwsa

Condition: like new (used), Year of construction: 2019, operating hours: 37 h, Manufacturer: K+G Wetter Model: AW U200 Year: 2019 Condition: Used Dwjdpfx Apozl D H Newsa Serial Number: 430/2009 Stock Number: 3399 Hole plate diameter: 200 mm Hopper: 360 litre Working hours: Only 37 hours! Power: 3 x 400V, 50Hz, 52.1kW Dimensions: 3550 x 1500 x 2200 mm Weight: 2400 kg With tensioning device for precutter, bayonet lock nut, sorting device and fill sensor on hopper. Including lifter for 200L tote bins and tool trolley. For fresh and pre-cut frozen product.

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA Control Siemens Sinumerik 840D weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 Dwsdpfeyan R Nex Apwoa - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, Year of construction: 2004, total height: 1,600 mm, total length: 1,250 mm, total width: 1,400 mm, Colour: Grey Empty weight: 900 kg Price: On request - Details: - └ Description: Bad bearings - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: 102850 - Motor power: 1.0kW - Transport dimensions: 1250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dwsdjyr Rnzopfx Apwea VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Suction capacity: 750 l/min Discharge capacity: 640 l/min Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Air-to-oil cooler Screw manufacturer: BAOSI Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Dsdpfx Aszr Nauepwewa Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Dwedpfxeyx Hx Do Apwja Motors Wheel Head: 20 HP 975rpm Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: ready for operation (used), Year of construction: 1998, Saacke UWIC Dwjdpezrz I Dofx Apwsa

Condition: good (used), Year of construction: 2016, functionality: fully functional, Schneeberger Corvus GDS Dodozrz Iqopfx Apwewa

Year of construction: 1995, condition: ready for operation (used), A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement. Dodpfozrn Nnsx Apwjwa

Year of construction: 1983, condition: ready for operation (used), A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment. Dwodpfxjzrn Nho Apwea

Year of construction: 1981, condition: ready for operation (used), A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible. Djdpfozrn Nbox Apwswa

Condition: excellent (used), functionality: fully functional, Key operating parameters and performance: Dwsdpfx Aoy Ud T Rspwoa Drying temperature: from 30 °C to 160 °C (adjustable via a precise 3-point controller). Dew point: stable at approximately -60 °C, which ensures thorough drying of hygroscopic materials. Dry air flow rate: from 80 m³/h to 180 m³/h for units in the compact series. Pre-drying time: reduced to just 3–4 hours for standard materials. Throughput: from 4 kg/h to 70 kg/h (values measured for Polyamide PA max). PRICE REDUCTION FROM 1150 TO 950 EUR!!!

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Two material handling devices Dsdpfszaum Dex Apwowa Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Colour: Grey Empty weight: 5.500 kg Dsdpfx Aszldvqepwjwa - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Control: Conventional - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: repair required (used), Two desiccant dryers in need of repair. Suitable for a DIY enthusiast or as a source of spare parts. Dwodjxtvb Iopfx Apwea Type MDC 800 Capacity: 42 kW Year of manufacture: 1990 and 1994 PRICE REDUCED FROM 2850 TO 1500 EUR!!!

Condition: good (used), functionality: fully functional, Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Labotek CON-EVATOR material conveying system Type: PGT 4/DDM Power: 0.5 kW Djdpfx Asvtxmwspwowa PRICE REDUCTION FROM 1150 TO 950 EUR!!!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer: Fasti GmbH Dodpsvzwrbefx Apwswa Type: ERD 65 B Rated power: 0.9 kW PRICE REDUCTION FROM 700 TO 550 EUR!!!

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek dryer Type: DDM 60 ALB Dedpfevrubnjx Apwjwa Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW PRICE REDUCTION FROM 1150 TO 850 EUR!!!

Condition: used, Year of construction: 2007, ABAC Genesis 7.508 Air Compressor on Air Receiver Tank Working Pressure 8 Bar, Free Air Delivery 1.2m3/min, Power 7.5kW, Weight 390kg, Air Receiver Tank Cap 272 litres. S/No. 304263 001 (2007), Total Hours 7240, on Load 983. Country of Origin: Italy Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Dsdezn Uvtjpfx Apwswa Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, TECHNICAL DETAILS Dedezrp Edopfx Apwjwa - Distance between centers : 1000 [mm] - center height : 180 [mm] - Max. part weight between centers : 100 [kg] GRINDING WHEEL HOLDER HEADSTOCK - External grinding * Power : 7.5 [kW] * Grinding wheel dimensions : 500/80/203 [mm] PART-HOLDER HEADSTOCK - Speed : 10-800 [rpm] POWER SUPPLY - Supply voltage : 400 [V] EQUIPMENT - CNC : Fanuc Oi-TF - 3 colors status lamp - Tool probe : Marposs - Coolant tank * with paper filtering unit * with cooling unit for coolant

Condition: good (used), mileage: 370,000 km, power: 338 kW (459.55 HP), first registration: 08/2023, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2023, Equipment: AdBlue, air conditioning, retarder, = Additional Options and Accessories = Dwodpfxjzq Dnqe Apwoa - Cab = Notes = Scania S 460

Condition: used, mileage: 965,000 km, power: 382 kW (519.37 HP), first registration: 10/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: brown, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, loading space length: 7,300 mm, loading space width: 2,700 mm, loading space height: 2,470 mm, Year of construction: 2020, Equipment: AdBlue, air conditioning, retarder, = Additional options and accessories = Djdpfxozq Dmge Apwowa - Cab = Notes = YS2S6X20005589086 Scania S520 B6x2NB Full air suspension OptiCruise+ retarder Special interior Alcoa wheels 965,000 km

Condition: good (used), mileage: 62,000 km, power: 338 kW (459.55 HP), first registration: 01/2026, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, air conditioning, retarder, YS2R4X20205804303 Scania R 460 01-19-2026 60,120 km Air suspension Retarder Auxiliary heater Refrigerator = Further information = Tire size: 315/70R22.5 Front axle: Steerable; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle: Double tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Number of cylinders: 5 Technical condition: good Dwodpfx Aozq Dmajpwoa Optical condition: good