Used Guide Ruler for sale (4,786)

Condition: used, Year of construction: 2003, Overview This SMI LSK 30T is a shrink wrapping machine for PET bottle packs, built in 2003 by SMI (Italy) and fully overhauled in 2023. It groups two packs into one bundle, wraps the bundle in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 30 packs per minute. It currently bundles 0.33 l and 0.50 l PET multipacks into 6 x 4 bundles. The machine runs film only (printed and oriented film); it is also equipped for trays, a mode that has never been used. It is in production only 3 to 4 days per month, so its working hours are low. Technical data - Manufacturer: SMI (Italy) - Model: LSK 30T - Year of manufacture: 2003, overhauled 2023 - Machine type: shrink wrapping machine for grouping packs, with integrated shrink tunnel - Output: up to 30 packs per minute - Current formats: two 0.33 l or 0.50 l PET packs grouped into one 6 x 4 bundle - Wrapping: film only, printed and oriented film; prepared for trays (never used) - Control: SMI POSYC touchscreen HMI, COSMOS servo drives, fibre-optic machine bus, CE control panel - Gearboxes: Bonfiglioli - Location: France Equipment - Two-lane infeed conveyor, each lane carrying 3 x 2 packs - Pack grouping station (2 packs into 1) - Film wrapping unit with film reel unwinder and double reel holder (manual change) - Integrated heating and shrink tunnel with chain conveyor - One controller for the whole machine, including conveyors and film table; only the infeed guides are adjusted to the bottle diameter - Format parts and spare parts, including a new original SMI POSYC 3000 HMI (2026, not yet installed) and further new original SMI parts - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition The machine is in good condition. It was fully overhauled in 2023 with original SMI replacement parts and is still installed and in production. It can be inspected in operation by appointment. Professional dismantling is included. Availability The machine stays in production until December 2026 and is available for loading from the end of December 2026. It is located in France. Fjdpfx Aj Afut Rem Eepp

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- Fodj Aidc Depfx Am Eepp The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: excellent (used), CATALOG NUMBER 8143 Technical data: Circular saw: - max. saw blade diameter 300mm - adjustable blade, front/rear - motor approx. 3.4kW - dust extraction port diameter 70mm Router: - spindle: - spindle diameter 40mm - spindle working height 180mm - locked spindle - motor 11kW - 2 types of rotational speeds 4000, 6000 rpm - electric saw brake - pneumatic material clamping on the carriage, 2 pcs from above and 2 pcs from the side - side carriage adjustable up/down, front/rear and at an angle - retractable support from the table - angle ruler - electric carriage feed Fsdpfxo Ah E Nkj Am Eopp - dust extraction port diameter 190mm - dimensions length/width/height 2950mm x 1700x 1630mm – weight 920kg ADVANTAGES - Polish production - electric carriage feed - upper control panel - used router, very good condition Net price: 17,900 PLN Net price: 4,163 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2009, machine/vehicle number: FA75, Used ITALDIBIPACK SA 1250 shrink wrapper - Year 2009Technical Specifications & Performance DataThe ITALDIBIPACK SA 1250 is a used shrink wrapper designed for secondary packaging operations in bottling and industrial packaging environments. Manufactured in 2009 and fully refurbished by ITALDIBIPACK in 2020, this machine is intended for wrapping products and grouped packs with shrink film. Its working configuration accommodates film rolls in different sizes, up to 1000 mm width.Manufacturer: ITALDIBIPACKModel: SA 1250Year: 2009Refurbishment: Fully refurbished in 2020 by ITALDIBIPACKMaximum film width: 1000 mmElectrical supply: 400 V, 3Ph + T + NFrequency: 50/60 HzPower: 2 kWWeight: 350 kgAdvanced Automation & Control SystemsThis shrink wrapper is configured for industrial operation with a three-phase electrical supply including earth and neutral connection. The machine is equipped for operation at 50/60 Hz and has an installed power requirement of 2 kW. Its film-routing arrangement incorporates guide and drive rollers to support controlled film handling during the wrapping cycle.The available safety protections contribute to protected operation around the machine's moving packaging components. The operating configuration is suitable for integration into an automated or semi-automated end-of-line packaging area, depending on the connected material-handling equipment and production layout.Production Line Integration CapabilitiesThe SA 1250 can be positioned downstream of filling, capping and labeling equipment to create shrink-film packs for a used bottling line or wider beverage production and industrial packaging process. It can receive products from straight infeed conveyors and can be coordinated with downstream palletizing or further handling systems.Machines of this type are commonly used to create stable, film-wrapped multipacks before pallet handling. The ability to use film rolls of different dimensions up to 1000 mm width provides flexibility when configuring packaging presentations and pack dimensions. Integration should include suitable product conveyors, electrical connection and synchronized upstream and downstream flow management.Machine Condition & Maintenance HistoryThe machine is in production. It was manufactured in 2009 and fully refurbished in 2020 by ITALDIBIPACK. This refurbishment history supports its suitability for continued second hand packaging operations where a maintained shrink wrapping solution is required.Manuals, refurbishment documentation and spare parts are available. These resources can assist maintenance teams with commissioning, routine servicing and ongoing support within a production line.Operational Performance & VersatilityThe ITALDIBIPACK SA 1250 provides a practical shrink wrapping function for grouped products in industrial packaging applications. It is suitable for use as part of secondary packaging operations in beverage production and other product-handling environments where film-wrapped packs are required.Its film handling system is designed a... Fjdpfe Aia Ehex Am Ejpp

Condition: used, Holz Her Auriga 1308 XL Black Edition Compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control 19 with 18.5" touchscreen monitor “Eco-Mode” energy-saving mode Pre-milling unit for attachment before the gluing section Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 8-60 mm Automatic glue height adjustment Pressure unit, pneumatic Trimming unit, pneumatic for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of 0-10° bevel on the trimming saw Multi-function milling unit MOT4, flush trimming 8 mm, radius milling - chamfer milling 15° via NC axes ProLock system for quick tool changes Profile milling unit - rounding of edges up to 3 mm edge thickness in a single pass via NC axes Shelf program for shelves with rounded front edges Scraper unit MOT4 for bevels and radii with 2 scraper holders via NC axes, high-gloss package with motorized adjustment of the horizontal guide rollers Surface scraper unit – finishing Buffing unit – polishing Fjdj Aitg Djpfx Am Eepp Spray system in the infeed and outfeed area Complete DIA tool set included Machine with very few operating hours, from a small workshop First delivery 2018 Machine in TOP condition Available from stock in Lieboch

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: DELEM, controller model: CNC-Steuerung DA-58T-Touch, bending force (max.): 135 t, working width: 3,100 mm, stroke length: 275 mm, throat depth: 410 mm, distance between stands: 2,600 mm, table height: 900 mm, oil tank capacity: 200 l, travel distance X-axis: 800 mm, back gauge speed R-axis: 180 mm/s, back gauge travel distance R-axis: 250 mm, overall weight: 8,650 kg, total length: 4,250 mm, total width: 2,050 mm, total height: 2,800 mm, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Brand new, hydraulic ERMAK bending press, 3-axis model, CNC-HAP 3100x135t POWER-BEND - CNC control DELEM DA 58 touch - manual crowning - synchronized - front light barrier AKAS-Laser Safety fast X-axis, R axis possible standard equipped with three automatically controlled axes. The positioning of the vertical axes (Y1, Y2) is done hydraulically. The back gauge (X) is moved by an electric motor at a speed of 230 mm/s. Two precise ball screws ensure very accurate positioning. Optionally, a fourth machine axis (R) with a fast-running servo drive is available. - 2D graphical touch-screen programming - 15“ color TFT with high resolution - bending sequence calculation - crowning control - servo and frequency converter control - advanced algorithms for Y-axis control for valves with closed or open loop - USB, peripheral interface - Profile-58TL offline software Standard equipment: - upper tool segments 835 mm, special steel, hardened - lower tool 60x60, four bending channels, special steel, hardened - upper tool holder with PROMECAM quick-change system - CNC linear scales Y1/Y2 - CNC-controlled back gauge, X-axis with AC drive - individual models with crowning device - CE safety devices - support arms with scale and T-slot - swiveling control panel DELEM ER 70 - CNC control ER 70 - mobile control panel with foot trigger and emergency stop button - operating manual / CE Optional accessories: - WILA manual crowning - CNC WILA crowning, calculation based on pressing force - dynamic two-axis back gauge X/R with servo drive - upper and lower tool clamping system hydraulic - upper tool clamping system pneumatic Fsdpe Ai Sfijfx Am Eepp - upper and lower tools WILA - light barrier AKAS Laser Safe - special design with increased throat depth on request The synchronization tolerance is only ± 0.01 mm. TECHNICAL DATA: Speed X-axis servo drive: 230 mm/s Rapid traverse Y-axis: 200 mm/s Speed Y-axis: 10 mm/s Retraction Y-axis: 120 mm/s Speed X-axis AC motor: 230 mm/s Back gauges: 2 pcs Support arms: 2 pcs Motor power: 11000 W Column distance: 2600 mm Installation height: 550 mm Table width: 90 mm further features - high quality standards, robust industrial models with high edge accuracy from state-of-the-art production - welded, stress-free monoblock steel construction with very good vibration damping - S275 material with very high tensile strength, high-quality BOSCH-REXROTH or HOERBIGER hydraulic system - powerful hydraulic cylinders, honed and chrome-plated, CNC control ER 70 with 2D graphics display and bending simulation - Y1/Y2: CNC-controlled vertical axes with automatic positioning on linear scales, synchronization tolerance ± 0.01 mm - X: CNC-controlled back gauge, AC drive with ball screw, linear guide tolerance of the back gauge finger ± 0.01 mm - bending tool made of high-alloy, hardened special steel - control cabinet with cooling system, SIEMENS electrical components - installed safety by side panel cover - emergency stop button on the control unit and on the control panel - upper tool holder with PROMECAM quick-change system - upper tool made of easily exchangeable standard segments 835 mm - lower tool 60x60 with four V-bending channels - adjustable support arms with scale and T-slot

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Fpsdpfsui Ifcjx Am Esp

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids Fpodpfx Amjxv Da Rs Eop

Condition: excellent (used), Year of construction: 2019, operating hours: 43 h, functionality: fully functional, machine/vehicle number: PR4-3000-0719-0385, input voltage: 400 V, working width: 1,500 mm, working length: 3,000 mm, control type: CNC control, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Fpede Ahikqepfx Am Ejp Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT.

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Fpjdpfevvkfdex Am Esp

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. Fpsdpfjzrfpxex Am Ejp 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: used, Year of construction: 2014, Processing length 3200 mm. Vertical machining center for drilling, milling, and grooving. Maximum flexibility and versatile applications with minimal space requirements. Modern industrial design, built with high-quality components, offering an optimal view of the machining process and perfect access to the tools. Machine frame in welded construction with ground and hardened prism guides. Ball screw spindles in the X, Y, and Z axes for precise positioning and perfectly fitting workpieces. Workpiece-friendly clamping system using vacuum cups with automatic cup positioning. Extremely short setup times. Workpiece fixing on the back allows machining of the entire circumference without additional re-clamping (up to workpiece lengths of 1300 mm). This ensures the fastest machining cycles and the highest accuracy. Program-controlled adjustment of workpiece thickness; material thicknesses from 8 to 70 mm are possible. 1 machining field with length stop. Material support. 1 roller track for supporting the workpieces downwards. 4 roller tracks for gentle support of sheet material. Height-adjustable infeed roller track for 4-sided milling. Complete finishing of the workpieces through precise milling of all 4 workpiece edges. Extraction: Machining head extraction with extraction nozzle Ø 120 mm and extraction nozzle in front of the drilling head Ø 140 mm, both leading upwards. Underfloor extraction with extraction nozzle Ø 120 mm; connection at the bottom on the left side or from the top of the machine. Safety guard according to CE standard. Enclosing guard with viewing window and safety interlock on the door. TECHNICAL DATA Workpiece size: X = 200 - 3200 mm (longer with additional support); Y = 70 - 920 mm. Material thickness: Z = 8 to 70 mm. Max. travel in X-direction without reclamping: X = 1500 mm. Z-travel: Z = 240 mm. Maximum programmable speed: Vector speed: 68 m/min; X = 25 m/min, Y = 60 m/min, Z = 20 m/min. MACHINE OPERATION / SOFTWARE CAMPUS V6 - Single Evolution. Software for CNC machines of the Evolution type with automatic generation of the division of workpieces for machining. 1 software license for the machine - secured via a license plug. Consisting of: 1. CAMPUS NC-HOPS; 2. CAMPUS aCADemy; 3. CAMPUS MT-Manager; 4. CAMPUS Workcenter; 5. CAMPUS process simulation. CAMPUS NC-HOPS: Graphical variant system with WOP and CAD/CAM features for creating part variants and macro technology. CONTROL Fpedpfxs Ahhmbs Am Eep PC control. Remote maintenance: Integrated network card for data transfer of control and program data. Data transfer takes place via a high-speed internet connection. Requirement: High-speed internet connection at the machine. The use within the warranty period for warranty cases is free of charge. 19" flat screen for easy and clear machine operation. USB port for data backup or for direct input of machining programs at the control panel. DRILLING UNIT Drilling unit 7883, 15 spindles. Drive power 1.7 kW. 9 vertical spindles, individually selectable. Arrangement in L-shape, 5 in X and 4(5) in Y direction, 32 mm pitch. Max. drilling diameter: 35 mm. Total drill length: 70 mm from the mounting end (depending on plate thickness). Spindle extension stroke: 70 mm. Rotation direction: Alternating right/left. n(max.) 1000 - 4400 min-1, continuously adjustable. Mounting: M 10 thread - 11 mm smooth shank, without tool, without chuck. 6 horizontal spindles. 2 double drilling spindles in X direction. 1 double drilling spindle in Y direction. Mounting: M 10

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Fpodpfxjwl D S Ue Am Eop

Year of construction: 2019, condition: used, Offered is an empty bottle inspector with container guidance. Control: operator panel with screen, container guide elements, pneumatic components, signal light. Inspection possible by arrangement. Fpedpe Ai T Azjfx Am Eep

Condition: used, functionality: fully functional, “Belt Conveyors“ for Sale -1Pc. Belt Conveyor . Belt Widthness: 2.700 mm. . AA.: 3.050 mm. . With 2,2 KW Gearmotor . -1Pc. Stadler Anlagenbau Gmbh . Sorting Conveyor Belt . Belt Widthness: 1.600 mm. . AA.: 9.000 mm. . With SEW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness: 1.200 mm. . AA.: 6.800 mm. . With 3 KW SEW Gearmotor and Permanent Magnetic head pulley. -1Pc. Dosing belt . Belt Widthness: 1.200 mm. . AA.: 2.400 mm. With 3 KW Gearmotor. -1Pc. Beerepoot Dosing belt . Type : BE . Belt Widthness: 1.200 mm. (Trough-Shaped) . AA.: 2.000 mm. Without motor. -1Pc. Belt Conveyor . Belt Widthness: 1.000 / 1.200 mm. (Without belt) . AA.: 6.600 mm. With 4 KW Motor and Gearbox. -1Pc. Belt Conveyor . Belt Widthness: 1.000 mm. . AA.: 5.750 mm. With SEW Gearmotor. -1Pc. Dosing Belt . Belt Widthness: 1.000 mm. . AA.: 2.100 mm. With 1,5 KW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness: 900 mm. . AA.: 5.550 mm. With 2,2 KW SEW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness: 800 mm. (Through-Shaped) . AA.: 7.200 mm. . With 11 KW SEW Gearmotor and Belt-Scraper . -1Pc. Belt Conveyor . Belt Widthness: 800mm. AA.: 6.700mm. With 3 KW SEW Gearmotor and Belt-Scraper . -1Pc. AMB Belt Conveyor . Type: FB1 GBF 08/2.25 . Belt widthness: 800 mm. . AA.: 2.250 mm. With 1,5 KW SEW Gearmotor. -1Pc. Belt Conveyor . Belt Widthness : 750 mm. . AA.: 2.900 mm. . With 2,2 KW Motor. -1Pc. Belt Conveyor . Belt Widthness: 600 mm. . AA.: 6.600 mm. With 2,2 KW SEW Gearmotor and Side-guide. -1Pc. Beerepoot Belt Conveyor . Type: BE . Belt Widthness: 600 mm. (Trough-Shaped) . AA.: 6.600 mm. With 1,5 KW SEW Gearmotor. Tube-construction with Side-guiding. -1Pc. Dosing Belt . Belt Widthness: 500 mm. AA.: 1.000 mm. With motor. Fpedpfx Ameu Tkt De Ejp -1Pc. Belt Conveyor . Belt Widthness: 300 mm. (Without belt) . AA.: 2.850 mm. Without motor. -1Pc. Belt Conveyor . Belt Widthness: 190 mm. . AA.: 4.750 mm. With 1,1 KW SEW Gearmotor.

Year of construction: 2026, condition: new, Winder for spool´s up to 10kg gross weight with clamping conus and traverse guiding, Fpjdpfx Asdlpyuom Eep adjustable speed and travelling width

Year of construction: 2026, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion Fsdpfxei Tu U Uo Am Ejpp with cooling bath with adhesive water blow-off with haul-off with winder and guiding device

Condition: good (used), Year of construction: 2006, Channel baling press Presona LP 80 VH1 with Wirbulator, year of manufacture 2006, refurbished. Technical data: Manufacturer: Presona Sweden Type: LP 80 VH1 Year of manufacture: 2006 Pressing force: 78 t Drive power: 55 kW Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: approx. 450-600 kg Throughput capacity with a bulk density of: 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW (municipal solid waste): 20-27 t/h Tying: 5-ply vertical Weight: approx. 25000 kg Note: The press has been refurbished by us. The following work was carried out: Press cleaned and repainted Piston rod refurbished Steel structure on the press body New Hardox wear plates for the press bed Replacement of: Shaft for wire control Chain for wire pull Wire pull needles Wire guide rollers Fjdpfxe Ahhxij Am Eopp Running wheels Guide rails Hydraulic hose lines Hydraulic seals Oil temperature sensor Photo cells in the feed hopper Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: excellent (used), Year of construction: 1959, input voltage: 400 V, input frequency: 50 Hz, total length of planing tables: 1,800 mm, Combi 500 Combination Surfacing and Thicknessing Planer - 2-knife cutterhead - Table length: 1800mm - 2 dust extraction ports - Feed motor with 2 speeds - Year of manufacture: 1959 - 2-knife cutterhead, planing width 510mm, planing height 200mm - Aigner auxiliary fence and guide strip - Toothed steel feed roller, steel take-off roller Fodpfx Asy Tuctom Eepp - 2 dust extraction ports - 2 sliding rollers in the thicknessing table

Condition: excellent (used), Catalog number 8074 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - silencing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESS PLANER: - max thickness of workpiece on the thickness planer 220mm - thickness planer roller guard - from above: - pawls - toothed, twisting infeed roller - pressure rollers - planing roller - pressure roller - smooth outfeed roller - main motor 4kW - electric brake - electric table adjustment up/down Fedpfxezuk Ews Am Ejpp - knife setting device - 2 types of rotational speeds 6000/12000 m/min - dust extraction nozzle diameter 2x120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES - Italian made - silencing comb - knife setting device - unpainted - excellent condition - used planer/thickness planer Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 2021, total width: 1,900 mm, total height: 1,900 mm, overall weight: 1,500 kg, product length (max.): 61,000 mm, Circular Metal Saw manufactured in 2021. This M.S.K. OMRM 133 features a saw blade diameter of 550 mm and a stated working blade height of 200 mm. It offers automatic angular positioning at 45° and 90°, along with a cutting mode for profiles up to 7,500 mm long. If you are looking to get high-quality cutting capabilities, consider the M.S.K. OMRM 133 machine we have for sale. Contact us for further details. • CE marking: Yes • Cutting specifications: • Saw blade diameter: 550 mm • Stated working blade height: 200 mm • Cutting angles: 45°, 90°, and intermediate angles Fodo Ahi Tnjpfx Am Eopp • Automatic angular positioning at 45° and 90° • Automatic cutting mode for profiles up to 7,500 mm long • Repeat cutting mode • Single-head and double-head operation • Adjustable saw blade rotational speed • Hydropneumatic saw feed • Coolant system for aluminium cutting • Positioning and profile handling: • Fixed left cutting head • Movable right cutting head • Servo-controlled positioning system • Linear guide system • Profile support system to prevent sagging • Profile roller conveyor at the right cutting head • Vertical pneumatic clamping system • Control and safety: • PLC control system • Touchscreen operator panel with multilingual menu • Protective covers over both cutting heads • Emergency stop button • Electrical and pneumatic data: • Rated power: 7.5 kW • Supply voltage: 400 V, 50 Hz • Rated current: 15 A • Compressed air: 6–8 bar, 30 L/min

Condition: used, Year of construction: 2020, operating hours: 21,398 h, machine/vehicle number: IntNr231185, EMAG WEISS W11 CNC SL650 – Universal Cylindrical Grinding Machine – Year of Construction: 2020 For sale is a used EMAG WEISS W11 CNC SL650 – a high-performance universal cylindrical grinding machine with CNC control. This machine is ideally suited for demanding grinding operations on individual parts, prototypes, and small to medium production runs. Machine Specifications Manufacturer: EMAG WEISS Type: W11-CNC SL650 Year of Construction: 2020 Operating Hours: Approx. 8,850 spindle hours / approx. 22,000 power-on hours Condition: Used, well-maintained, ready for immediate operation Technical Data Control: CNC-controlled (e.g., Heidenhain / Siemens / Fanuc – depending on the configuration) Max. Grinding Length: 650 mm (between centers) Center Height: Approx. 200 mm External Grinding Diameter: Up to approx. 390 mm Max. Workpiece Weight (overhanging): Approx. 100 kg (MK4) Max. Workpiece Weight (between centers): Approx. 250 kg X-Axis Traverse: Approx. 380 mm Z-Axis Traverse: Approx. 1,150 mm Grinding Wheel Diameter: 400 – 500 mm depending on equipment Rated Power: 9 – 11 kW (approx. 12 – 15 hp) Peripheral Speed: 20 – 50 m/s Equipment and Performance Features CNC touchscreen operation with Windows-based interface – user-friendly programming via dialogue or DIN/ISO (optional) Two-in-one concept: The machine can be operated both conventionally and CNC-controlled. High-precision linear and ball screw guides for high accuracy Direct measuring system (glass scales) (optional on many machines) Automatic dressing of the grinding wheel with compensation Fpodpfx Ame Ahq Sbo Ejp Crash control & gap monitoring for machine and process safety Coolant system, emulsion separator, and chip conveyor available (depending on equipment) Preparation for automation / robot interface possible The machine can be inspected in operation by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Table unit from a DROOP & REIN portal milling machine Fpjdpfx Asthuzpsm Eep Clamping plate with T-slots made of steel cast gray iron Table unit with clamping plate and very robust guide rail Table clamping surface: 5500 x 2000 mm Travel of the table clamping plate: approx. 3100 mm Table height / overall height: 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single start) - Machining table guided very stably on the bed - Metal telescopic guide rail cover - from a DROOP & REIN portal milling machine - Table longitudinal movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots, 28 mm - Drive via SIEMENS servo motor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Overall height: 1050 mm Weight: 27 tons Good condition

Condition: used, Year of construction: 2000, operating hours: 44,000 h, machine/vehicle number: IntNr231371, STAR CNC sliding head lathe SA 16-12, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 44,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 [mm] - Z-axis travel: 140 [mm] - Spindle speed: 8000 [rpm] - Spindle drive power: 2.2 [kW] - Number of tool positions: 13 TAILSTOCK SPINDLE - Max. bar diameter: 10 [mm] - Spindle speed: 8000 [rpm] - Number of tool positions: 4 FMB Minimag bar feeder High-pressure unit 40 bar Collets, type: 138E (F20/87) (max. 16.5 mm) Guide bushings, type: 39.001 (F391) (max. Ø 17 mm) Fpodpfx As Ahq Rtsm Eop The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use The pump-head fixed to this model is a Watson-Marlow 520R2. The pump-head is configured for 2.4 mm wall-thickness tubing Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Fodpfx Aexv A Akom Eopp Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids