Used Gwk Chillers for sale (25)

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Control / Security: Redpsznl Dusfx Ac Tecd - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Condition: used, Year of construction: 2015, Temperature controller Pipe trace heating Manual shut-off valve Thermometer Strainer Solenoid valve for make-up water Solenoid drain valve (normally open when de-energized) Level monitoring Tank Pump Pressure gauge Ball valve Check valve Redpszl S Tdjfx Ac Tscd Pressure reducing valve Temperature sensor Expansion tank Air vent Backflow preventer Biocide dosing system Corrosion inhibitor dosing system Side-stream filter Twin water softener system GWK Hermeticool

Condition: used, circulating medium 25 °C Cooling capacity 10 kW Rcedezbc Hbepfx Ac Tod Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, The four temperature control units are for sale; the price is per unit. All units have been in operation for less than 1000 hours, which we can document with a photo. Medium: Water Operating temperature: 140 degrees Heating capacity: 9 kW Cooling capacity: 40 kW Rcedpfx Acsznlffj Tjd

Condition: good (used), Year of construction: 1999, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm Rcedpfx Acoqmt Acs Tod -Weight: 99 kg

Condition: good (used), Centrifugal pump, water pump -Manufacturer: gwk, self-priming centrifugal pump type WP 60 -Motor: 0.55 kW 2800 rpm Rjdeqfkizjpfx Ac Tocd -Pump: Speck Pumps -Max. Flow rate: 45 l/min -Max. Delivery height: 55 m -Quantity: 1 pieces available -Price per piece -Dimensions: 280/140/H150 mm -Weight: 10.8 kg/pc.

Condition: good (used), Year of construction: 2007, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc. Rjdeiyzn Djpfx Ac Tocd

Condition: good (used), Year of construction: 1998, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit Rjdpeiyzn Ijfx Ac Tjcd -Manufacturer: GWK, temperature control unit teco wi -Type: teco 1000 -Heating output: 18 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the type plate -Dimensions: 1190/320/H745 mm -Weight: 102 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 70 kg, input voltage: 400 V, input frequency: 50 Hz, power: 27 kW (36.71 HP), temperature: 90 °C, GWK CS90 t36 Tool tempering furnace, 2018, heating: 27 kW. Rjdpfjzab Syjx Ac Tjcd

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, cooling capacity: 10 kW (13.60 HP), type of cooling: water, overall weight: 100 kg, ambient temperature (max.): 25 °C, Equipment: cooling unit, type plate available, The teco cw 60 cooling unit from Technotrans is for sale. Here are some of the technical specifications: If you are interested, I can send you the operating manual for the unit. The new price in 2023 was €9,400. Basic Control 32-bit controller Profibus interface Cooling capacity: 10 kW, water-cooled refrigeration circuit Temperature range: 0-25 degrees Celsius Rcjdpfx Acozk Id Ne Tjd Suitable for water without antifreeze Pump: WP602 with a flow rate of 60 l/min Maximum pressure: 6 bar Mobile Dimensions: L: 1281 mm x W: 505 mm x H: 749 mm Weight: 100 kg etc.

Year of construction: 2014, condition: used, working temperature 30 ° cooling capacity 7,4 kW fill weight 1,82 kg operating pressure 20/8,6 bar volume capacity 9,44 Kubikmeter/h volume capacity 2900 pro Min. Rcedpfx Acexb Egce Tod volume capacity 28,5 bar weight of the machine ca. 160 kg dimensions 675 x 835 x 1250 mm Temperature control unit with built-in water tank

Year of construction: 2016, condition: ready for operation (used), A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment. Rcodpfx Acezfp Huo Tjd

Condition: excellent (used), Year of construction: 2019, Peripherals - gwk Rcsdpsvt Er Tjfx Ac Tjd PTW 140-1Selection eco Year 2019 Min/max operating temperature 5-140c° CW 62

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-03, Temperature control unit by gwk, pre-owned and untested. Designed for mold temperature control, injection molding, and industrial process technology applications. Operates as a single-circuit system with the Logotherm control system. The unit uses water* as the heat transfer medium, with a maximum supply temperature of 30 °C*. Heating capacity is not specified; pump capacity is 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Rsdpoy Su Aqjfx Ac Tecd

Condition: used, Year of construction: 2011, machine/vehicle number: 253321-01-04, Temperature control unit by gwk, used and untested. Designed for tool temperature regulation, injection molding, and industrial process engineering. Operates as a single-circuit system with Logotherm control. Uses water* as the medium, with a maximum supply temperature of 30 °C. Heating capacity not specified, pump delivers 35 l/min at 3.5 bar*. Year of manufacture: 2011. Total weight: 200 kg. Rcjdpfsy Su Adsx Ac Tod

Year of construction: 2015, condition: excellent (used), The temperature control unit is for sale ;2015- the new price was 4995€ Medium : Water Functions - Function for self-optimizing temperature control - Function and fault displays - User-dependent and password-protected rights - Limit comparator (tolerance band monitoring of the actual value with alarm message) - Adjustable setpoint limit - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from the PC) - 2nd temperature setpoint - Tool management (setpoints and control parameters can be be saved as a recipe) - Measured value recording for quality assurance (actual values can be be output to SD card with time stamp) - Electronic level monitoring with dry run protection - Automatic filling and replenishment with leakage and level function monitoring level function monitoring - Automatic venting Monitoring/safety - Short-circuit-proof controller and control outputs - Temperature sensor in circulating medium flow and return - Safety temperature limiter to prevent overheating and Safety valves against overpressure Rcodpom Dtm Aofx Ac Tod - Contactless heating control with solid state relay - Safety temperature reduction when switching off - Acoustic and visual warning signal with symbol and text text on the touch screen- Symmetrical mains load with three-phase drive and three-phase heating elements three-phase current heating rods - 3-fold safety shutdown of the heater - Reversible circuit breakers and motor protection switch - Dirt trap in the cooling water supply Hydraulics - Continuous cooling via motor valve

Year of construction: 2014, operating hours: 150 h, condition: as good as new (ex-display), The temperature control unit from GWK is for sale; it was only used at trade shows. I would be happy to send you a description of the unit! Medium: Water / 30% glycol Heating capacity: 9 kW Operating temperature: max. 160 degrees Celsius Cooling capacity: 40 kW Cooling: Heat exchanger Mobile Rjdpfxeza U Dco Ac Tocd

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, The teco th 140 temperature control unit from GWK with indirect cooling is up for sale; it offers a wide range of features which I can provide upon request. The hose lines are also included. The unit will be inspected by GWK prior to delivery, with inspection costs already included in the sale price. Medium: Heat transfer oil, Marlotherm SH Redpfx Aex Dcd Roc Tocd Heating capacity: 27 kW at up to 350°C Cooling capacity, indirect: 110 kW Pump: 150 l/min at max. 7 bar Cooling via bypass with 3-way motorized controller Shut-off valve on supply and return Connection for PT 100 sensor Internal drip tray Dimensions: L: 1320 mm, W: 570 mm, H: 1720 mm Weight: 410 kg

Year of construction: 2015, condition: excellent (used), The device is for sale: Redpfx Acsncdwye Tecd They have not been used much and are fully functional Please refer to the type plate for technical details, there is of course a complete operating manual for the device

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature management. It is equipped with a mold-proximal valve switching unit (piston accumulator) to supply the piston inserts with water at temperatures of up to 200°C. NEW PRICE of the system: €67,000 plus the water hoses. The system will be inspected by Technotrans (GWK) prior to sale. More technical details about the “vario” temperature control unit available on request... The complete system consists of: - Medium: water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature control of mold inserts) - 1 mold-proximal valve switching unit Rcjdpfoyxgnfex Ac Tsd - 1 piston accumulator - 1 electronic control and regulation unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection package, optional for an extra charge ...and more, see pictures.

Year of construction: 2012, condition: good (used), Temperature control unit GWK integat it40E-3 Stock no.: 503198 Machine type/ Device type: Temperature control unit Manufacturer: GWK Type: integat it40B-2 Year of manufacture: 2012 The gwk integrat 40 is a modular multi-circuit temperature control system that can be integrated into the overall process for segmented mold temperature control. - The component consists of: - Central module integrat 40 B2-WZ2 (year 2012) - Electrical mold module W1 (year 2012) - Hydraulic mold module W1 (year 2012) - Temperature control module it40 T1 (FY 2012) - Electric mold module W2 (FY 2012) - Hydraulic mold module W2 (FY 2012) - Temperature control module it40 T2 (FY 2012) Connected load: 63 A Max. operating temperature: 95° C Heating capacity: 3 kW / segment Cooling capacity: 27 kW Rsdpfx Acsyknrho Tjcd Pump output: 0.5 kW Interface: VARAN Voltage: 400-415V 50Hz Circulation medium: Water/water

Year of construction: 2015, condition: reconditioned (used), Original price in 2015: €15,200 GWK cooling tower Documented complete overhaul by GWK Rcedpfodxlntox Ac Tsd DGUV certificate available

Year of construction: 2015, condition: excellent (used), The machine was checked by the manufacturer, of course I can show you a WhatsApp video about it . The system has run very little for the age see corresponding picture . Invoice of the repair is available !!! Water-cooled system - Automatic make-up - Return flow protection Rcjdsnl Ervepfx Ac Ted - Frequency-controlled pump can operate up to 6 bar - Cooling water regulating valve , NEW - New refrigerant R 134a - Alarm light for faults - Cartridge filter Complete operation and management from the PV possible, this machine is worth your money due to the many options! Of course you will also receive the technical specification on request!

Condition: like new (used), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, The temperature control unit from GWK is available for sale; it includes options such as stainless steel plate heat exchanger, manual filling, analog interface via HAN-7 plug, and device front prepared for a Powerlink interface (2 x M12 plugs). Rcjdexx R Rbopfx Ac Tod Operating temperature: max. 130°C Medium: heat transfer oil Heating capacity: 6 kW Cooling capacity: 29 kW

Condition: good (used), Year of construction: 2007, cool machine GWK Weco 48 AZX 48 KW, Cooling capacity pump and tank, year: 2007, price: 8.500 €, contact: Mr. Rainer Eckerle Rodpfx Acod H Rd Ie Tecd