Used Haas Sl 40 for sale (232)

Condition: like new (used), Year of construction: 2023, operating hours: 2,889 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, overall weight: 3,600 kg, HAAS VF-2 – CNC Vertical Machining Center, Year of Manufacture 2023 Well-maintained 3-axis CNC machining center from a lease return, with only approximately 539 spindle hours. The machine is in near-new condition and is available immediately. Technical Data: - Control: HAAS Next Generation Control - Travels X/Y/Z: 762 / 406 / 508 mm - Table size: 914 × 356 mm - Spindle speed: 8,100 rpm - Spindle power: 22.4 kW - Spindle drive: Inline direct drive - Tool holder: 40 taper - Automatic tool changer - Program memory: 1 GB - Coolant tank: 208 liters - Coolant pump: 0.75 kW - Power connection: 380–480 V - Spindle hours: approx. 539 h - Cycle time: approx. 624 h Special equipment: - Spiral chip conveyor Gjdj Ah Sptspfx Amljui - Preparation for through-spindle coolant (TSC Ready) - Mobile hand-held device RJH-XL with touchscreen - Manual spindle orientation Location: Baden-Württemberg, Germany Availability: Immediate

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE . Gjdpfx Amsz Ehxyoljui

Condition: good (used), Year of construction: 2007, Turning diameter 330 mm Turning length 508 mm Spindle speed 3,400 rpm Tool holder VDI 40 Distance between centers 610 mm Turning diameter over the bed 585 mm Turning diameter over the cross slide 241 mm Travel - x 214.6 mm Travel - z 508 mm Bar diameter 63 mm Total power consumption 15 kW Machine weight approx. 4,100 kg Total power consumption 15 kW Dimensions 2800 x 1800 x 1800 mm Equipment: - Bar feeder 1.5 m Servo Bar 300 Guodoz Stgqspfx Amloi - 3-jaw chuck - Collet chuck - Tailstock - Various holders

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Guedpfx Amswrfamolei

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, overall weight: 7,000 kg, controller manufacturer: HAAS, number of axes: 3, This 3-axis HAAS SL 30TBHE was manufactured in 2007. It features a maximum turning diameter of 406 mm and a maximum turning length of 864 mm. The machine is equipped with a chuck diameter of 315 mm and a spindle bore of 103 mm. If you are looking to get high-quality turning capabilities, consider the HAAS SL 30TBHE CNC lathe we have for sale. Contact us for further details. • Configuration: 3-axis machine with driven tools; no counter spindle • Spindle bore: 103 mm • Chuck diameter: 315 mm Gjdpozhwlqofx Amljui • Max turning diameter: 406 mm • Max turning diameter over saddle: 368 mm • Max turning length: 864 mm • Tool turret capacity: 12 positions • Live tooling: Yes Additional equipment • Included tooling: 1 live tool + additional accessories (unspecified) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s Gedsz Nxwispfx Amljui • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, Gusdpfx Amex Uznfoloi C Axis 360deg Rotation, B Axis -35deg to + 100deg, High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HAAS, This 3-axis HAAS SL-30 was manufactured in 2001. A robust horizontal turning machine featuring a 3400 rpm spindle, Ø76mm bore, and a 10" chuck. It includes a tailstock, 12 x VDI40 tool stations, a toolsetter, and a conveyor. If you are looking to get high-quality turning capabilities consider the HAAS SL-30 machine we have for sale. Contact us for more information. • Tailstock • 12 x VDI40 Godpfxox H Uzvo Amljui • Toolsetter • Conveyor

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 240 mm, turning diameter: 200 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 11,200 W, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 1,700 mm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, type of input current: three-phase, overall weight: 3,000 kg, spindle nose: A2-5, Equipment: USB port, rotational speed infinitely variable, For sale: HAAS ST-10 CNC lathe. Year 2014. 160 BISON chuck, 45mm bar capacity, VDI40 turret, manual tailstock (as shown in the picture), tool probe. Rigid tapping capability. The machine is in very good technical condition, precise, and repeatable. A sleeve is included for the spindle, allowing for the installation of a stop. Included in the set: Standard hard jaws (DKT) Hard jaws for small diameters (DKT) 4 sets of soft jaws (DKT) Approximately 25 sets of soft jaws 25 sets of jaw inserts with screws For interested parties: For an additional fee: 160 chuck - 3-jaw, pivoting SMW AUTOBLOK for forgings and castings - jaws with carbide inserts for 2 inches - price to be negotiated. Gusdpfxj Akffls Amlji The machine is in continuous operation and will be sold without the VDI tool holders visible in the pictures.

Condition: good (used), Year of construction: 2006, Haas VF-5B/40HE vertical machining center, year 2006. Gusdpfx Amszcu Imslsi

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis Guodpfez Nfirsx Amlei - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,668 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 711 mm, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC-1250SS was manufactured in 2022. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 762 mm, and Z-axis travel of 711 mm. The machine is equipped with a high-speed spindle capable of 15,000 RPM and includes a 30+1 side-mount tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-1250SS universal machining centre we have for sale. Contact us for further details. • Spindle nose to table: 102–813 mm • Spindle cooling: Included • Control and standard features (Haas CNC) • 1 GB program memory • Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) • Ethernet interface; HaasDrop • High-Speed Machining • Large color touchscreen • Remote Jog Handle with touchscreen (RJH-Touch) • Wireless Intuitive Probing System (WIPS) • Variable flow coolant; Coolant tank cover • Chip auger • Safe Run Mode • Early Power Failure Detection Module • HaasConnect remote monitoring • Second Home Position Gedpfs Aifu Tex Amljui • M130 media display • Synchronized tapping • Standard 1-year warranty • Installed machine options (integrated) • 15,000 rpm inline spindle (15K-40T-IN) • 30+1 side-mount tool changer (SMTC-30-40T-HS) • Through-spindle coolant, 69 bar (TSC1K) • Through-tool air blast (TAB) • 8 additional M-functions (8M) Additional equipment • Chip conveyor with filtration system (CDF CONVEYOR) • External coolant filtration (ACF) • 360-liter coolant tank (GAL95) • Oil skimmer for coolant tank (OIL SKIMMER) • Chip strainer (CHIP STRAINER) • Air supply preparation for pneumatic vise (AIR VISE READY) • Machine anchoring kit (ANCHORING KIT) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,400 W, overall weight: 6,804 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2007. This HAAS SL-30THE features a maximum cutting diameter of 432 mm and a cutting length of 864 mm. It includes a spindle bore of 88.9 mm and a maximum speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30THE machine we have for sale. Contact us for further details. • Max. swing over front cover: 762 mm • Max. swing over cross slide: 381 mm • Max. cutting diameter: 432 mm • Max. cutting length: 864 mm • Spindle bore: 88.9 mm • Max. torque: 407 Nm @ 700 rpm • Spindle nose (Standard): A2-6 • Feedrate rapids X axis: 18.0 m/min • Feedrate rapids Z axis: 18.0 m/min • Outside/inside turning tool size: 25 mm • Bore size for turning tools: 50 mm • Tool change time (adjacent tool): 1 second Gedj Agnvvopfx Amleui • Tool change time (opposite tool): 3 seconds • Electrical supply / Power requirement: 28 kVA • Voltage: 380 V 3-phase • Air requirement: 113 l/min @ 6.9 bar • Coolant tank capacity: 189 l Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2009, operating hours: 3,262 h, functionality: fully functional, machine/vehicle number: 1072682, overall weight: 6,000 kg, HAAS VF-3SSHE CNC vertical machining center, manufactured in January 2009, available for sale. Condition: Excellent condition, fully operational, all inspections / services done. Visible features and equipment: • Inline direct-drive spindle • Maximum spindle speed: 12,000 rpm • High-speed tool changer • Through-spindle coolant (TSC) • Electrical supply: 360–480 V, three-phase, 50/60 Hz • HAAS CNC control Recorded operating hours: • Power On Time: 3,262 h 57 min • Cycle Start Time: 1,251 h 29 min • Feed Cutting Time: 1,103 h 02 min • M30 cycle count: 5,815 h Guodpfx Ajz Ag Nuemlei The machine can be inspected in Baia Mare, Romania. Price: 38.500 EURO Price does not include tools and spare parts.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS Gusdpfxs Afwine Amlji TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2014, operating hours: 2,308 h, functionality: fully functional, table width: 500 mm, table length: 630 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 41, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS UMC-750 TECHNICAL SPECIFICATIONS: • Date of manufacture: October 2013 • Power-on hours: 2 308 h • Number of axes: 5 (simultaneous machining) • X-axis travel: 762 mm • Y-axis travel: 508 mm • Z-axis travel: 508 mm • B-axis travel: +110° to -35° • C-axis rotation: 360° • CNC control: HAAS • Max. spindle speed: 12 000 obr/min • Table dimensions: 630 × 500 mm • Distance from spindle nose to table surface: 102–610 mm • Tool magazine capacity: 40 + 1 tools • Max. power: 22,4kW • Chip conveyor • Machine weight: approx. 9 000 kg Gujdpfjz S H D Njx Amlei Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale. Vertikales Bearbeitungszentrum

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Gjdpfx Ajz Dh Edjmleui Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,400 W, overall weight: 6,804 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS SL-30THE was manufactured in 2007. It features a maximum swing over the front cover of 762 mm and a maximum cutting diameter of 432 mm. The machine offers a cutting length of 864 mm and a spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS SL-30THE horizontal turning machine we have for sale. Contact us for further details. • Machine with X/Z/C axes • Max swing over front cover: 762 mm • Max swing over cross slide: 381 mm • Max cutting diameter: 432 mm • Max cutting length: 864 mm • Spindle bore: 88.9 mm • Max torque: 407 Nm @ 700 rpm • Spindle nose (standard): A2-6 • X-axis rapid feed: 18.0 m/min • Z-axis rapid feed: 18.0 m/min • Number of tool stations: 12 • Outside/inside turning tool size: 25 mm • Bore size for turning tools: 50 mm • Tool change time (adjacent tool): 1 s • Tool change time (opposite tool): 3 s • Electrical supply / power requirement: 28 kVA • Voltage: 380 V, 3-phase • Air requirement: 113 l/min @ 6.9 bar • Coolant tank capacity: 189 l Technical Specification Gjdpfx Amsz I Ryfolsui Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gujdpfs Ah Hbcsx Amlji

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,995 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. Gsdpezcnzmofx Amlsui • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm • Air pressure: 6.9 bar • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2023, Haas TM2-P Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 WIPS HSM Guodpfxjzua Hws Amlei 4th axis connection Very few operating hours Like new!

Condition: excellent (used), Year of construction: 2022, operating hours: 1,173 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Haas VF-2SSYT + TRT160 + URC-12 Fanuc robot cell SMTC-30-40T-HS | WIPS-R | CT | 12K-40T-IN | AUGER NGC | 1GB | ETHERNET | WIFI | EPFDM | HAAS CONNECT | TOUCH SCREEN 4AXD | 5AXD | DWO/TCPC Gsdpe Aiii Tsfx Amlsui 55GAL | VARIABLE FLOW CLNT | P-COOL | TSC1K | ACF CHIP STRAINER | OIL-SKIMMER | COOLANT REFILL | MIST CONDENSER HSM

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm X axis traverse 762mm Y axis traverse 406mm Gedo Ahw Rzepfx Amlsui Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Wireless intuitive probing system Swarf auger Coolant system Lighting Guarding

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Guedpezg Drzefx Amlji Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,126 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS VF-2 YT was manufactured in 2008. It features a spindle speed of up to 10,000 RPM and an impressive X-axis travel of approximately 762 mm, Y-axis travel of approximately 508 mm, and Z-axis travel of approximately 508 mm. The table dimensions are approximately 914 x 457 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2 YT vertical machining centre we have for sale. Contact us for further details. Gusde Ai E Ngopfx Amlsi - Spindle Taper: Steep Taper 40 (SK 40 / BT 40) - Cooling System: Through-Spindle Coolant (TSC / IKZ) with filter unit - Table Size: Approx. 914 x 457 mm - Control: Haas CNC with electronic handwheel (Remote Jog) - Operating Hours (Power-On): Approx. 1,126 h - Operating Hours (Program Run): Approx. 352 h - Operating Hours (Cutting Time): Approx. 254 h - Electrical Connection: 360–480 V, 3-Phase, 50/60 Hz - Full Load Current: 20 A (Max. 35 A) Technical Specification Through-spindle Coolant Yes