Used C 26 Genius for sale (58,034)

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA - multiple combination for sawing, milling, planing-thicknessing. The work tables made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free working. Unique in this performance class: lightweight aluminum sliding table, anodized, with ball contact system. Swiveling saw blade from 90° - 45 Table extension arm with aluminum crosscut fence for panels and large workpieces Planing unit with TERSA quick change system with three planing knives Helical toothed steel infeed roller for constant workpiece infeed during thickness planing Curved milling hood for profiling, standard with fine adjustment Milling unit with two speeds Three independent motors for each working unit Quality Made in Europe Equipment details Aluminum sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail Durably lightweight Saw unit adjustment Manual height and angle adjustment of the saw unit via star knob Precise positioning by means of a scale TERSA planer cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Particularly low noise Table planer The milling unit has two speeds for flexible tool use. The machine is equipped with a finely adjustable bow cutter for profiling. With the aluminum slide tenoning is possible without any problems. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helical toothed infeed roller guarantees constant infeed. The planing table can be folded towards the inside of the machine to save space. The changeover from planer to thicknesser is done in seconds with one handle. Surface planer Standard with TERSA planer blade quick change system Large dimensioned jointer tables The planing and thicknessing tables are made of grey cast iron and guarantee the smoothest running and vibration-free operation. Saw unit Saw swivels up to 45 With saw blade 250 mm Ø at max. 80 mm cutting height On the rip fence can be cut up to 500 mm width. Table extension With degree scale and aluminum fence for angular cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer cutterhead Anodized aluminum format sliding carriage Miter fence with one folding stop Multifunctional fence for parallel cutting and planing Eccentric clamping arm Model minimax c 26g TERSA Article no. 5500027 Cutting length 1200 mm Cutting width with rip fence 500 mm Max. Cutting width left of saw blade 1200 mm saw blade inclination 90 - 45 degrees Max. Cutting height at 90° 80 mm sliding carriage length 1140 mm Format sliding carriage width 201 mm Gijdjdqzh Tepfx Aggsp Height of sliding table 70 mm Saw table length 1024 mm saw table width 224 mm saw table height 900 mm Cutterblock type TERSA Cutterblock diameter 62 mm Number of planing knives 3 pcs Planing table width 260 mm Dressing table length 1040 mm Angle of inclination of sawing/planing fence 90/45 degrees Dressing chip removal max. 3 mm Thicknessing table length 450 mm Thicknessing table width 260 mm Thickness working height min. 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 214,681 km, power: 80 kW (108.77 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 630 kg, maximum load weight: 2,870 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,250 mm, next inspection (TÜV): 11/2026, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Equipment: airbag, central locking, electronic stability program (ESP), Performance/Engine: 1,968 cm³, 4-cylinder, with turbocharger Axles: 4x2 Brakes: Disc brakes Cab: Tinted windows, electric windows, electric exterior mirrors, audio system Refrigerated Body: Deep-freeze, 1 right-hand side door, 2 rear doors, fixed partition wall Refrigeration Unit: Carrier 350 MT Multi-Temp with 2 evaporators, compressor/electric power, cooling down to -20°C Other Equipment: Power steering, immobilizer Registration / Documents: Previously registered in Germany, Emissions sticker 4 (green), emissions test valid until 12/2026 For sale on behalf of customer Tel: Location: Postcode 89 ID: 117321 Panel van Refrigeration unit Carrier Xarios 350 MT Front and rear stabilizers 6-speed manual transmission 4-cylinder 2.0l diesel engine Long wheelbase Partition wall Bi-Temp -20°C 3.5 tonner Central locking with remote control Driver airbag Right sliding door, special edition Hinges for rear doors with extended opening angle Emissions standard EU5 plus Video: We always have a large selection of used cooling and deep-freeze vehicles in stock. More offers can be found at Non-binding offer, sale on behalf of customer, errors and sale reserved Advertisements and company logos on vehicles may have been digitally edited in the photos. Giodpfxsx Enuye Aggep

Condition: used, Year of construction: 2019, operating hours: 1,360 h, Mini excavator CASE CX26C, * Year of manufacture 2019, * 1360 operating hours, * Heating, * Air conditioning, Godpfx Agjurfkcegsip * Rubber tracks, * Dozer blade, * Quick coupler

Condition: used, mileage: 414,416 km, power: 70 kW (95.17 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, airbag, central locking, Power/engine : 2.143 cm³, with turbocharger Axles : 4x2 Brakes : ASR, disc brakes Cab : Color glazing, El. window lifter, El. Exterior mirrors, Exterior temperature display Refrigerated body : Cold Car, Bunker doors/ice, 5 doors left, No. of doors right 5 doors Refrigeration unit : Cold Car, Eutectic storage cooling, Cooling down to -33 °C Other equipment : Power steering, Immobilizer ID: 117556 ATP 06/26 Front axle with increased load capacity Electronic Stability Program (ESP9i) Stabilizers HA reinforced under frame Stabilizer reinforced on front axle Spring and damper front reinforced Version for countries with small license plate Battery management Lockable glove compartment Storage above windscreen 6-speed manual gearbox ECO Gear Wheelbase 3665 mm 3,5 Tonner Speedometer km/h Seatbelt warning system for driver's seat Crosswind Assist Service interval display ASSYST Automatic headlight cut-off to parking light Adaptive brake light Daytime running light Pre-fitting electr. Scope for 3rd brake light Emission class Euro 5b+ N1 Engine OM 651 DE 22 LA 70 kW (95 hp) 3800/min Adjustable passenger seat Airbag driver Smoking package Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power supply (380V) overnight. The solidification point of the eutectic solution is -33°C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used cooling and ice cooling vehicles in stock. You can find more from our range under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Gsdpfx Aeva R Exoggsip

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Giodpfx Aswg Sgcoggop

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. Gjdpfx Aeyq Ez Hsggoip External reference: 6063

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Gjdpfx Agou R S Dhogjip Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: ready for operation (used), Year of construction: 2006, This HOMAG KFL 526 / C was manufactured in 2006. A robust double-sided edgebander, it handles workpiece thicknesses from 12 to 40 mm and sizes up to 2500 x 1200 mm. Features include a gluing unit, profile trimming, and a finish unit for precise edge finishing. Ideal for efficient edge banding with speeds up to 35 m/min. Contact us for more information about this machine. Additional equipment Gijdpfxsx U Uzro Aggsp • Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW • PUR Nordson Melting Station / Tool Set / Suction Tube Machine Benefits Technical Machine Benefits • Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm • Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing • Minimum workpiece gap: 500 mm

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours • Table size: 575 x 500 mm • Max workpiece weight: 700 kg Giedpfx Agoyip Aregep • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots • 9 UPC pallet slots with loading drawer • Double rotary gripper for Erowa ITS • Single gripper for UPC pallets

Year of construction: 2009, operating hours: 40,500 h, condition: ready for operation (used), Movement X-Axis Movement 400 Y-Axis Movement 350 Z-Axis Movement 350 This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine. Godpsx D Hr Sjfx Aggeip Application Types EDM

Condition: used, maximum load weight: 2,217 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 05/2025, loading space length: 3,660 mm, loading space width: 1,750 mm, loading space height: 350 mm, total width: 1,810 mm, total height: 930 mm, A46 GW260N0161390 High loader trailer manufacturer: Unsinn, Type: UH 3617-26-10, Gross vehicle weight 2,600 kg, overrun braked, 100 km/h, 10" aluminium rims, aluminium side wall... and much more. Product information: "Unsinn UH 3617-26-10", 100 km/h version, shock absorbers installed. Chassis: Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics * Hollow section construction, welded and fully hot-dip galvanized Axles, braked model: AL-KO braking system Jockey wheel: Reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg Gisdpfxoyqdtbj Aggep Load securing: 8 foldable lashing recesses, recessed in the floor frame profile * 8 lashing rings under the loading surface * Vehicle not prepared Errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 642 mm, Rear tipper by manufacturer Unsinn, model WEB HK 2715-26-13. Gross weight: 2,600 kg, flatbed, open box, overrun brake, rear tipper with hand pump. • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Anodised double-wall aluminium side panels Gijdpfxjyn Uhws Aggep • All side panels foldable and removable • Removable steel corner posts • Attachment options in all four corners for tarpaulin frames, mesh extensions, sidewall extensions, or front wall height extension • Recessed long lever locks • 3 mm fully galvanized steel floor – extremely robust • Drawbar and frame of hollow profile construction, welded and fully hot-dip galvanized • Numerous cross members for high point loading capacity • All cross and longitudinal members in contact with the floor • 6 folding lashing recesses, flush-mounted in the floor frame profile (600 daN/kg) • 6 lashing rings underneath the cargo floor • Sturdy 3-stage hydraulic cylinder • Manual hydraulic pump • Maintenance-free rubber suspension axles by ALKO • Automatic reverse function • ALKO overrun device and parking brake • 13-pin plug • Reversing light • Large, heavy-duty safety lighting • Integrated rear fog lamp • Recessed rear frame lighting • Centre-position jockey wheel with clamp bracket Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Intermac Cutting Table Genius 37-61 CT - Brand: Intermac Godpfxeyuiw To Aggoip - Model: Genius 37-61 CT - Year of manufacture: 2007 - Condition: Good used condition - Glass thickness: 3-19 mm - Accuracy: 0.15 mm - Working height: 900 mm - Processable dimensions: 3710x2750 mm - Immediately available - Installation also possible by our Modeco Global GmbH service team! - Video of the cutting table in operation available upon request.

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/1988, loading space length: 13,500 mm, loading space width: 2,500 mm, total length: 13,500 mm, total width: 2,500 mm, suspension: steel, tire size: 7.50R15, wheelbase: 7,520 mm, color: yellow, Year of construction: 1988, Equipment: ABS, = Additional options and equipment = - Leaf suspension - Central lubrication = Further information = Axle configuration Tyre size: 7.50R15 Brakes: Drum brakes Suspension: Leaf suspension Rear axle 1: Tyre tread left: 30%; right: 30% Rear axle 2: Tyre tread left: 30%; right: 30% Weights Empty weight: 7,320 kg Payload: 18,680 kg Gross vehicle weight: 26,000 kg Functionality Gisdpfx Agox Db Hqjgep Body brand: Stas 0-26/2DUA Extendable body: Yes Condition Technical condition: Very good Optical condition: Very good Damages: None

Condition: used, mileage: 540,329 km, power: 285 kW (387.49 HP), first registration: 04/2017, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,990 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, soot filter, spoiler, General information Model code: ### Cab: Comfort Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: Volvo, 12 gears, Automatic Axle configuration Giedpfxeyg R Iqj Aggjp Tyre size: 315 / 70 / R22.5 Make axles: Renault Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.326 kg Carrying capacity: 11.674 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6c Maintenance APK (MOT): tested until 05/2026 History Number of owners: 2 Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2013, next inspection (TÜV): 07/2026, loading space volume: 26 m³, MÜLLER STEEL THERMO TIPPER approx. 26 m³ Air lift axle Front access ladder missing Hydraulic hose missing Without support legs SP January 2027 Tüv 07/2026 BPW axles Tyres approx. 40-50% etc. Gedpfoyt Tugox Aggeip

Condition: good (used), mileage: 834,725 km, power: 285 kW (387.49 HP), first registration: 05/2017, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,990 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, power mirror, soot filter, spoiler, General information Model code: ## Cab: Comfort Godpfx Aoytavwsggjip Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: Volvo, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Renault Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.342 kg Carrying capacity: 11.658 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6c Maintenance APK (MOT): tested until 06/2026 History Number of owners: 2 Condition Technical condition: good Visual appearance: good Number of keys: 1 (1 hand transmitter) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 1,029 mm, Total weight: 2,600 kg, high-loader, open box, overrun braked, rear tipper with hand pump. Errors and prior sale excepted. Gisdsym Ig Depfx Aggop

Condition: excellent (used), functionality: fully functional, Four-sided planer Weinig Profimat 26 Fortec + EM11 Working width: 230 mm Working height: 130 mm Number of spindles: 5 Spindle arrangement: Bottom 5.5 kW Left Right 11 kW Top 7.5 kW Bottom 5.5 kW Material feeder: Weinig EM 11 Pneumatic pressure rollers divided into 3 sections Feed speed adjustable via frequency inverter: 5–24 m/min CE certificate Godpfx Agsyn Et Rsgoip Technical documentation

Condition: used, mileage: 253,000 km, power: 265 kW (360.30 HP), first registration: 01/2003, fuel type: diesel, empty load weight: 14,230 kg, maximum load weight: 11,770 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, loading space length: 4,700 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, trailer coupling, Vehicle location: Bovenden, aluminum superstructure, with cab, suspension seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, sun visor, 16-speed switch, ABS (anti-lock braking system), raised exhaust, work lights, leaf suspension, trailer coupling with air, light, and hydraulic connections, lashing rails, rear-mounted crane, demountable, emergency stop, grab control, 2-point hydraulic outrigger, radio remote control, four hydraulic extensions, yellow environmental badge Wheelbase: 3200 mm Body: Aluminum three-way tipper, aluminum drop sides, swinging and folding, with spring relief, Palfinger PK 16502 C, demountable, 12.4 m - 890 kg, remote control, crane 5100 operating hours. Load chart: max lifting capacity 5,580 kg, 4.30 m – 3,310 kg, 5.90 m – 2,270 kg, 7.90 m – 1,530 kg, 10.20 m – 1,220 kg, 12.40 m – 990 kg, oil cooler, grab available at an additional price of €2,500.00. The vehicle is also available without crane for €29,900.00! Gedpfx Agov Inmpegsip ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: not inspected (used), Year of construction: 2001, X-axis 800 mm Y-axis 600 mm Z-axis 800 mm Table clamping surface 850 x 630 mm Max. table load 1,000 kg Max. spindle speed 9,000 rpm Tool holder SK40 Tool changer 15 positions Control HEIDENHAIN Weight 8,000 kg Godpeylxgfofx Aggsip Incl. chip conveyor Incl. retrofitted 4th axis Incl. documentation Machine is immediately available. The vises pictured are not included in the scope of delivery. 1 unit ALZMETALL BAZ 15 CNC for spare parts is included in the scope of delivery!

Condition: used, axle configuration: 3 axles, first registration: 12/2002, color: grey, Year of construction: 2002, gearing type: other, LICENSE PLATE: AC22259 TITLE: ZORZI 26 R 070 19 A BALESTRATO HOOKLIFT TRAILER REFERENCE: 21R09 YEAR: 2002 AXLES: 3 WHEELBASE: 3800 mm MAXIMUM LENGTH: 9.205 m ORIGIN: Italian PAYLOAD: 21,650 kg - TRAILER: 26,000 kg gross weight BODY TYPE: Hooklift FITTING: BTE ADR: No BODY COMPATIBILITY FROM: 5.00 m + 0.20 m TO: 7.30 m + 0.20 m SUSPENSION: Leaf spring BRAKES: Drum Gsdpfx Aeuznrcsggsip TYRES: 265/70 R19.5 ACCESSORIES: - 4 hydraulic external locks - Locking system with tractor hydraulic hoses RECONDITIONED: No TESTED: 10/12/2022 TYRE CONDITION: 60% The prices shown do not include VAT. Please contact our sales department for updated pricing and terms. For more information: Loris: 3484773001 URL: #thespecialistsofhooklift SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specialising primarily in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 hooklift containers, with and without cranes. S.E.&O Given the number of listings and level of detail provided, Aurora invites you to verify data accuracy with the sales staff.

Condition: good (used), Year of construction: 2003, operating hours: 69,000 h, functionality: fully functional, clamping force: 2,000 kN, For sale is an Arburg 570 C 2000 150/60 injection molding machine with three components. The machine is fully functional and, after assembly, is ready for use. The third injection unit is not functional because the protective housing was removed for transport. It will be functional again after assembly. The third injection unit can be offered separately (stand-alone). Particularly noteworthy is the year of manufacture of the third unit: 2011 (see image). Technical specifications: Year of manufacture: 2003 Pump hours: 68,287 Cylinder: Ø 30 mm / SP150; Ø 18 mm SP 60 Length: 5,700 mm Weight: 5.7 t Equipment: Q-switch, conveyor belt, core pull, internal pressure Upon request, loading onto a truck and transport throughout Europe can be arranged for an additional charge. Prices plus VAT Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Gjdpfxjt Ug Uzs Aggeip Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: like new (used), functionality: fully functional, mileage: 525,000 km, first registration: 08/2015, fuel type: diesel, empty load weight: 12,840 kg, maximum load weight: 13,160 kg, overall weight: 26,000 kg, tire size: 13R22.5, axle configuration: 6x2, fuel: diesel, energy efficiency: C, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total width: 2,550 mm, total height: 600 mm, loading space length: 8,150 mm, Year of construction: 2015, Equipment: Bluetooth, air conditioning, car registration, central locking, compressor, crane, cruise control, differential lock, onboard computer, power mirror, tachograph, truck registration, Body Dimensions: Fitted with PALFINGER PK13001.3 Power Link Plus B crane with 3 hydraulic outlets + fixed box 8.15 m * 2.55 m + 600 mm with aluminium side panel. Extras: Air conditioning, automatic transmission, engine brake, liftable third axle, rear air suspension, cruise control, CD radio, onboard computer, electric windows, central locking, hill-start assist... Gisdpfxeyizqzs Aggop

Condition: used, mileage: 2,000 km, power: 243 kW (330.39 HP), first registration: 02/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, * MAN Lions Intercity * Pre-registered vehicles * 57 seats * 26 standing places * Year of manufacture: 2026 * Contact us for further information Subject to prior sale, errors, and changes reserved. Giedpfjynu H Hox Aggjp