Used Haas for sale (224)

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes Dsdpoz Ah S Djfx Ak Aecp • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 31,300 h • Tool changes count: 69,000 • Voltage: 440 V • Phase: 3 Dodpfxsz Dar Nj Ak Ajcp • Frequency: 50/60 Hz • Full-load current: 35 A

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Technical Specification Taper Size BT 40 Dcjdpfx Akez Erwts Aop

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Table (~ max): 19.0 in (483 mm) • Spindle Nose to Table (~ min): 4.0 in (102 mm) • Spindle Max Rating: 10.0 hp (7.5 kW) • Spindle Max Torque: 45.0 ft-lbf @ 500 rpm (61.0 Nm @ 500 rpm) • Spindle Drive System: Direct Speed, Belt Drive • Bearing Lubrication: Grease Packed • Cooling: Air Cooled • T-Slot Width: 0.626 in to 0.630 in (15.90 mm to 16.00 mm) • T-Slot Center Distance: 4.33 in (110 mm) • Number of Std T-Slots: 3 • Max Cutting Feedrate: 650 ipm (6.5 m/min) • Rapids on X / Y / Z: 800 ipm (20.3 m/min) • Axis Motors Max Thrust (X, Y, Z): 2000 lbf (8896 N) • Tool Changer Type: Carousel • Max Tool Diameter (full): 3.5 in (89 mm) • Max Tool Length (from gage line): 12.00 in (305 mm) • Tool-to-Tool (avg): 4.20 s • Chip-to-Chip (avg): 5.00 s • Coolant Capacity: 45 gal (170 L) • Air Required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi (5.5 bar) • Input AC Voltage (1 Phase): 220 VAC, Full Load Amps: 40 A • Input AC Voltage (3 Phase Low): 220 VAC, Full Load Amps: 25 A • Input AC Voltage (3 Phase High): 440 VAC, Full Load Amps: 13 A • Domestic / Export Pallet Dimensions: 90.0 in x 80.0 in x 92.0 in (229 cm x 203 cm x 234 cm) • Shipping Weight: 4450 lb (2018.5 kg) Additional equipment • Renishaw Wireless Intuitive Probing System (WIPS) with OTS table probe installed • Flexible coolant nozzle assembly Dcedpfx Akoz Nywkj Ajp Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 1997, Mikron HAAS VCE1000 vertical machining center Year: 1997 Axis X travel 1016 mm Axis Y travel 508 mm Axis Z travel 635 mm Table width 457 mm Table length 1220 mm Djdjz Tlhcjpfx Ak Ajcp Type of CNC HAAS Spindle taper ISO 40 Max. part weight on table 1575 kg ATC Number of tool pockets 20 Max. spindle speed 7500 rpm Machine dimensions length 3530 mm height 2985 mm width 2450 mm weight 5500 kg Accesories/options: - Chip conveyor - Through spindle coolant - Prepared for 4.axis ( drive and wiring included ) - Renishaw touch probe - Renishaw TS27 tool measuring In very good condition, came from a Swiss tool shop.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,326 h, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 207 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-6SS was manufactured in 2016. It features impressive X, Y, and Z travels of 1,626 mm, 813 mm, and 762 mm respectively, along with a high-power 22.4 kW spindle capable of reaching 12,000 rpm. The machine includes a high-speed side-mount tool changer with 24+1 stations and a robust table load capacity of 907 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-6SS vertical machining centre we have for sale. Contact us for further details. • Travels: X 1,626 mm; Y 813 mm; Z 762 mm; spindle nose to table 102–864 mm • Table: 711 × 1,626 mm; 5 × 16 mm T-slots; 125 mm T-slot pitch; max table load 907 kg • Spindle: max torque 122 Nm @ 2,000 rpm; ABEC Class 7 bearings; electronic orientation; water-cooled spindle head; BT40; through-spindle air blast; tool release button • Tool changer: • Standard side-mount 24+1, BT40; all-electric bi-directional; max tool Ø 76 mm (full), 127 mm (adjacent pockets empty); max tool weight 5.4 kg; tool-to-tool 2.3 s; chip-to-chip 3.2 s • Optional 40+1: tool-to-tool 2.8 s; chip-to-chip 3.6 s; max tool Ø 76 mm (full), 152 mm (adjacent pockets empty) • Feed rates: rapid traverse X/Y/Z 30.5 m/min; max cutting feed 21.2 m/min • Motors/Drives: axis max thrust (X/Y/Z) 15,124 N; direct-coupled servo motors; brushless servo motors; Vector Drive (Y-Δ) • Coolant & lubrication: 360-litre pull-out coolant tank; automatic lubrication system Dcedpfx Akezh Hbnj Asp • Construction & enclosure: rigid cast iron construction; triangular wide-base castings; heavy-duty sheet steel enclosure; 14-gauge cold-rolled steel; free-flow enclosure design; door opening width 1,549 mm • Machine size & utilities: max height 3,378 mm; width 5,232 mm; depth 3,835 mm (door open); compressed air 113 l/min @ 6.9 bar; electrical 380 VAC, 3-phase, 50–60 Hz; installed power 28 kVA • Controls/Functions: Rigid tapping; Remote Hand Jog (RJH); tool load monitoring; 5 spare M-functions • Accuracy/Quality: 100% ballbar test for 3D squareness and machining accuracy • Other: high-power cartridge spindle; high-speed side-mount tool changer (24+1); easily accessible coolant tank; 1-year parts and labour warranty Additional equipment • None listed (no robots, automation, chip conveyor, bar feeder, or other external accessories specified)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,472 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, controller model: NGC, table load: 680 kg, overall weight: 3,810 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,000 g, number of axes: 3, This 3-axis HAAS VF-2SSYT was manufactured in 2022. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 914 x 457 mm and a maximum table load of 680 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SSYT vertical machining centre we have for sale. Contact us for further details. • CNC control: Haas Next Generation Control (NGC) • 1 GB program memory, 15" LCD • USB, Ethernet, Wi‑Fi • HaasConnect remote monitoring • VNC, DPRNT support • Early power‑failure detection, program restart from any block • Run Stop Jog Continue, SafeRun collision mitigation • Electronic handwheel, memory lock Dsdpfx Ako Abap Ne Aecp • Fourth-axis readiness: • VF‑YT 4th‑axis preparation • 4AXD: 4th‑axis drive, connections, and wiring • Note: Rotary table not included • Software options: • DWO/TCPC (Dynamic Work Offsets & Tool Center Point Control) • HSM (High‑Speed Machining with look‑ahead) • Probing cycles and SO, MACRO, COORD, VPS functions • Axis travels and feeds: • Spindle nose to table: 102–610 mm • Rapids X/Y/Z: 35.6 m/min • Max cutting feed: 21.2 m/min • Max thrust X/Y: 8.87 kN; Z: 13.7 kN • Worktable: • 914 × 457 mm • T‑slot table, 16 mm slots, 125 mm spacing • Spindle: • Direct drive, spindle cooling, taper air blast • Rigid tapping • Tool changer: • Side‑mounted ATC, 30 + 1 tools • Max tool Ø (all pockets): 63.5 mm • Max tool Ø (adjacent empty): 127 mm • Tool‑to‑tool: 1.8 s; chip‑to‑chip: 2.4 s • Accuracy: • Positioning ±0.005 mm; repeatability ±0.003 mm • Ballscrew thermal compensation • Coolant and probing (integrated options): • P‑COOL: Programmable coolant nozzle • TSC: Through‑spindle coolant 21 bar, 22 l/min • WIPS‑R: Wireless workpiece and tool probing system • Machine features: • Fully enclosed machining area (sliding front doors, hinged side windows) • Coolant system with pull‑out tank • Automatic central lubrication • Compressed‑air connection • Machine work light Additional equipment • AUGER: Screw‑type chip conveyor • ACF: Auxiliary coolant filtration system, 25 µm • COOLANT MAINT PACK: Coolant maintenance package • COOLANT REFILL: Automatic coolant replenishment system (requires external water supply) • Enclosure mist extraction / mist condenser (as supplied) • OIL‑SKIMMER: Coolant tank oil skimmer • CHIP STRAINER: Mesh filter and metal chip basket set • LK: Machine lifting kit with lifting accessories and brackets Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Year 2008 Control Haas Chuck 10” Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg Dcedpfjwbd Hqex Ak Ajp

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Dodpfx Akjzu Npho Aecp Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2008, Haas VF-5D/40TRHE 5-Axis Machining Center Year of manufacture: 2007/11 X-axis travel: 1,270 mm Y-axis travel: 660 mm Z-axis travel: 635 mm A-axis swivel range: ±120° B-axis rotary range: 360° Diameter of the rotary table: Ø211 mm Max. load capacity of the rotary table: 90.7 kg Table dimensions: 1,321 × 584 mm Max. table load: 1,814 kg Spindle speed: 0–15,000 rpm Spindle motor: 20 HP / approx. 14.9 kW Spindle taper: CT #40 Tool changer: 24 positions Dodpfx Aksztwdqe Aecp APPROXIMATE MACHINE DIMENSIONS Length: 3,531 mm Width: 2,591 mm Height: 2,921 mm Machine weight: approx. 7,484 kg EQUIPMENT HAAS 5-axis control (drives and wiring) 2-axis swivel table (trunnion)

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,850 h, functionality: fully functional, Available from Q1/2027; equipment can still be adjusted to meet specific requirements. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear milling cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Dcodsz Dhdyopfx Ak Ajp Working area: X-axis: 700 mm Y-axis: 410 mm Z-axis: 500 mm C-axis: Rotation angle 320° X3 auxiliary axis: Working area: 600 mm Grinding spindle: Interface: HSK 80 E Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution, linear axes: 0.0001 mm Rapid traverse, linear axes: 30,000 mm/min Resolution, rotary axes: 0.001° Speed, C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as a spindle: 1,000 rpm Optional: 2,600 rpm Control system: Siemens 840 DSL Tool changer: Dual-wheel Coolant system: Optional Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Additional accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, commissioning, and handover), training, and final acceptance at the customer's site. Financing options available upon request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Coolant system Djdpfx Akszwurae Ascp Manual

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, Dcjdpfx Akszg Efie Ajp 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: reconditioned (used), Haas ST-30 CNC Lathe / Turning Centre (2015) Haas Classic CNC Control Standard chuck diameter: 254 mm / 10″ Maximum turning diameter: Up to 533 mm Maximum cutting length: 660 mm Bar capacity: 76 mm / 3″ Spindle bore: 88.9 mm Maximum spindle speed: 3,400 rpm Maximum spindle power: 22.4 kW / 30 hp Standard maximum spindle torque 407 Nm at 500 rpm Spindle nose: A2-6 X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse, X and Z: 24 m/min Tool turret” 12 stations Swing over front apron: 806 mm Swing over cross-slide: 527 m Supplied With: Three-jaw power chuck, 12-station tool turret with assorted holders, Tailstock with centre, Fully enclosed machining area, Haas control with colour screen and handwheel. For sale with *Jet Machinery Ltd* Dedpfx As Agn Dcjk Ajcp Jet Machinery Stock No: #79298 Machine Serial Number: 3103531 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table size: 1,321 × 457 mm Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. Dodpfx Ao Agn Dvok Aecp For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: 311539, With a 310 mm diameter chuck with 3-jaw operation Jorgensen conveyor and coolant system Standard technical data Spindle Chuck: 12 inches (305 mm) Bar capacity: 102 mm Spindle nose: A2-8 Maximum speed: 3,200 rpm Power: 40 hp (≈30 kW) Machining capabilities Maximum turning diameter: 533 mm Maximum cutting diameter: 349 mm Maximum turning length: 826 mm Maximum distance between centers: 826 mm Axis travels X: 239 mm Dcsdpfx Akszzw Npo Aep Y: ±50.8 mm (total travel 102 mm) Z: 826 mm Turret and powered tools 12-position turret Powered tools Integrated C-axis for milling, drilling, and tapping Rapid traverse rates X: 12 m/min Y: 12 m/min Z: 24 m/min Subject to errors and omissions, this data is provided without any commitment.

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HAAS, This 3-axis HAAS VF-4 was manufactured in 2011. It features a generous X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a 40-tool automatic tool changer and includes a probe and toolsetter for enhanced precision. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. Dedpfx Akezxp D Ho Ajcp

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance from spindle nose to machine table: max. 610 mm Distance from spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s Dedpfx Akjzxhmtj Aecp MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full-load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full-load current, three-phase, high: 35 A Weight: 3539 kg The seller estimates the operating hours to be approximately 9,000 hours. EQUIPMENT 20-position tool changer Chip conveyor Internal cooling, 21 bar Coolant mist extraction system Additional coolant filter

Condition: ready for operation (used), Year of construction: 2025, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, overall weight: 6,464 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, number of axes: 5, This 5-axis HAAS UMC-750 was manufactured in 2025. It features an impressive X-axis travel of 762 mm, Y-axis travel of 508 mm, and Z-axis travel of 508 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool capacity of 30+1. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-750 universal machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Platter (~ max): 24.0 in / 610 mm • Spindle Nose to Platter (~ min): 4.0 in / 102 mm Dcsdpfxsz Nmigo Ak Aop • Spindle Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm • Spindle Drive System: Inline Direct-Drive • Spindle Taper: CT40 | BT40 | HSK-A63 • Spindle Bearing Lubrication: Air / Oil Injection • Spindle Cooling: Liquid Cooled • B Axis (Tilt) Travel: +120° to -35° • B Axis Max Speed: 170 °/sec • B Axis Continuous Torque: 2240 ft-lbf / 3037 Nm • B Axis Brake Torque: 2000 ft-lbf / 2712 Nm • C Axis (Rotation) Travel: 360° • C Axis Max Speed: 179 °/sec • C Axis Continuous Torque: 1854 ft-lbf / 2514 Nm • C Axis Brake Torque: 900 ft-lbf / 1220 Nm • Max Part Swing: 27.0 in / 686 mm • Platter Diameter: 19.70 in / 500 mm • Max Weight on Platter: 660 lb / 300.0 kg • Max Weight on Platter w/ Pallet Pool: 200 lb / 90.7 kg • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Number of Std T-Slots: 7 • T-Slot Center Distance: 2.48 in / 63 mm • Max Cutting Feedrate: 833 ipm / 21.2 m/min • Rapid Feedrate (X, Y, Z): 1200 ipm / 30.5 m/min • Max Thrust X / Y: 3300 lbf / 14680 N • Max Thrust Z: 4050 lbf / 18015 N • Tool Changer Type: Side-Mount Tool Changer (SMTC) • Tool Capacity: 30+1 • Max Tool Diameter (full): 2.5 in / 64 mm • Max Tool Diameter (adjacent empty): 5.0 in / 127 mm • Max Tool Length: 12.00 in / 305 mm • Tool-to-Tool Time (avg): 1.80 s • Chip-to-Chip Time (avg): 2.40 s • Coolant Capacity: 55 gal / 208 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Air Pressure Min: 80 psi / 5.5 bar • Electrical Input AC Voltage (3 Phase): 220 VAC (70 A) / 440 VAC (35 A) • Shipping Weight (Standard): 14250 lb / 6463.8 kg Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition. Dsdpfx Akewvgbye Aocp

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe • Coolant/air blow hose Dodpfx Ajz Nx Rcok Aecp Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Dodpfxszl Rzyo Ak Aocp Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. Djdpfx Asyh Hw Isk Ajcp The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: used, Year of construction: 2008, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Haas VF3YT/50 CNC milling machine. Ideal for precision machining of metals and other materials. Year of manufacture: 2008 Specifications: Axis travel: X-1016mm, Y-660mm, Z-635mm Table: 1372mm x 610mm Rapid traverse rate: 18 m/min Table load: 1814 kg Spindle taper: SK50 Spindle speed: 7500 rpm Spindle gearbox: 2-speed Spindle power: 22.4 kW Number of tools in the magazine: 30 pcs Machine weight: 7.5 t Dimensions: L x W x H 3.5 x 2.4 x 2.9 m The machine is equipped with: - Renishaw OMP40 workpiece probe - TSC internal spindle cooling - Automatic chip conveyor Dcedpfxozwhlge Ak Aop - Programmable coolant nozzle - Side tool magazine - Rigid tapping - Macro - HSM high-speed machining option - Increased memory up to 16MB It is possible to equip the milling machine with a 4th-axis rotary table. The machine has been serviced, is in good working order and ready for operation. The milling machine can be inspected and tested at our company's premises. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). Dedpfoywgaxjx Ak Ajcp The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.